Skip to main content
Extreme Bolt & Fastener
Quote

Technical Questions – FAQ’s

Last updated

463 posts · page 9 of 31

  • Understanding Bolt Lengths

    Q: What is bolt grip length vs the threaded length? And which is the total length of the bolt? A: Neither the grip length or threaded length provide information on the overall bolt length. The length of the bolt is always measured from under the head of the bolt to…

    Continue reading
  • Disadvantages of Titanium Bolts

    Q: What are the disadvantages of titanium?A: That would depend on the application. Titanium bolts are ideal for high strength applications – especially when lightweight fasteners are needed. Titanium screws are also excellent insaltwater and chloride conditions – among the best materials for these corrosion issues. Titanium screwsare also bio…

    Continue reading
  • Standard Angle for Inch Flat Head Screws

    Standard Angle for Inch Flat Head ScrewsQ: What is the standard angle for an inch flat head screw?A: Flat head screwsmade in inch dimensions typically have a standard angle of 82°. This holds true per ASME 18.3 for flat head socket cap screws which are the most common.However ASME B18.6.3…

    Continue reading
  • Strength of Titanium Screws

    Q: How strong is a titanium screw?A: Titanium screws are extremely strong as well as lightweight. They are known for their excellent strength-to-weight ratio. Grade 5 titanium screws have a strength of 148 ksi UTS and 138ksi yield. Titanium Grade 2 screws have a strength of 70ksi UTS and 50…

    Continue reading
  • Titanium and Steel Bolt Usage

    Q: Why isn’t titanium used more often than steel for bolts?A: Titanium is more costly than most steel so it is used for more niche situations such as saltwater and chloride corrosion, high strength applications that require lightweight bolting and medical applications where you need a bolt that is bio-compatible.In…

    Continue reading
  • Titanium Bolt Corrosion

    Q: Do titanium screws dissolve? A: When you mean dissolve, I’m assuming you mean corrode. That depends on the situation. Titanium bolts offer excellent corrosion resistance to saltwater, chlorides and certain acids. In those situations, they typically don’t corrode. Titanium bolts can corrode in the presence of strong acids. This…

    Continue reading
  • Titanium Is Higher Strength than Steel

    Q: Are titanium bolts stronger than steel?A: Yes, titanium bolts are higher strength than 300 series stainless steel. Grade 2 is approximately 2 times stronger with a UTS of 70ksi and yield strength of 50 ksi. Grade 5 titanium screws are about 4 times stronger than 316 with a ultimate…

    Continue reading
  • Titanium Screws Breaking

    Q: Do titanium screws break?A: Any material can break in the wrong conditions. Titanium offers excellent high strength: Grade 5, 148 ksi UTS and 138ksi yield and Titanium Grade 2, 70ksi UTS and 50 yield. If the conditions require a stronger bolt, the titanium will fail. Strong acids can corrode…

    Continue reading
  • Uses for Titanium Screws

    Q: What are titanium screws used for?A: Titanium screws are excellent for many applications. They are often used for their excellent resistance to saltwaterand chlorides. Titanium screws can service many decades in even polluted seawater and are resistant to both stagnant and rapidly moving oceans. Titanium is also almost inert…

    Continue reading
  • 17-4PH in Saltwater

    Q: What heat treatment would you recommend for 17-4PH exposed to salt water? Can I use H900? A: H900 is susceptible to chloride stress corrosion cracking. 17-4 with salt exposure should be H1025 or higher. And, best practice it to use the highest heat treat temp that works for an…

    Continue reading
  • UNC vs UNRC Threads

    Q: What is the difference between UNC and UNRC Threads? A: An “R” pitch can apply to UNRF (unified rounded fine thread) and UNRC (unified rounded coarse thread). The only difference between UNC threads and UNRC threads (or UNF and UNRF threads) is that the root of the thread –…

    Continue reading
  • Carbon Fiber Will Be CONDUCTIVE

    Q: I need a non-conductive screw. Can I use Carbon fiber reinforced PEEK? A: NO – The addition of carbon fibers into the polymer will significantly increase the conductivity of the material.

    Continue reading
  • MP35N Socket Head Cap Screw Specs

    Q: Is there a MIL spec or NAS spec for MP35N socket head cap screws? A: No, there is not an MS or NAS spec that covers MP35N socket head cap screws. For an MP35N socket head, typically we would offer per dimensions of NAS 1351 [or 1352] with material…

    Continue reading
  • Determining if a Material is Magnetic

    Q: How do I know if a material is magnetic?A: Iron is the element that causes magnetism. Therefore, any material/alloy containing iron MAY be magnetic to some extent. However while all stainless steels contain iron, some stainless steels are magnetic, and others are not. The defining factor of magnetism comes…

    Continue reading
  • What is a Jam Nut

    What is a Jam Nut Q: Can you tell me what the difference is between a standard hex nut and a jam nut? A: A jam nut has a shorter height than a standard finished hex nut. Typically, it is half as tall as a standard hex nut. A jam…

    Continue reading

Questions?

Our material experts are ready to help guide you through your specific application.