Skip to main content
Extreme Bolt & Fastener
Quote

Technical Questions – FAQ’s

Last updated

463 posts · page 18 of 31

  • Tungsten Fasteners for Radiopaque Applications

    Q: I’m looking for a radiopaque material for an xray application. I’ve tried lead but need something that is more intense that could be made into a screw. Is there a material you can suggest? A: Tungsten screws are excellent for radiopaque x-ray applications. Tungsten offers a higher density than…

    Continue reading
  • PEEK, PTFE, & PVDF Screws for Sterilization Processes

    Q: I need a polymer fastener that can withstand high temp pharma sterilization processes? There may also be chemical contaminants in the process.A: Depending on the temperatures you are looking at, the three options to consider would be PEEK, PVDF or PTFE fasteners. PEEK fasteners can be used to 500F.…

    Continue reading
  • Inconel Bolts for High Pressure Flange

    Q: Looking for a bolt rated 320 psi for use at a temperature of 1292F on an Incoloy 80oHT flange? Suggestions? A: Assuming you want hex head bolts and Inconel 625 is probably your best choice at those temperatures. At about 1300F, Inconel 625 bolts(per the chart below) should be…

    Continue reading
  • Alloy 926 Bolts for Improved Corrosion Resistance to 316

    Q: I have some 316 bolts that are experiencing slight corrosion from a mild chloride environment. I need an economic solution but a more corrosion resistant material. Any ideas?A: You have a few options here but you should consider a class of alloys called 6 Mo or 6 Moly alloys…

    Continue reading
  • Inconel 625 Bolts for Strength at 950C

    Q: We are having issues with a high temperature flanged joint where the bolts are continually loose when they cool down the system. The issue to me sounds like the bolts are losing tension due to the temps being too high and softening the bolts so they are plastically deforming.…

    Continue reading
  • Fasteners for High Temperature Exhaust Stream

    Q: I have a high temperature exhaust stream that needs an oxidation resistant fastener? Any suggestions, my temperature is about 1400F?A: For this temperature you have a few options depending on the strength you need. One option may be Nimonic 80A bolts which are usable to about 1500F. Also Nitronic…

    Continue reading
  • PTFE vs PEEK for Hydrochloric Acid Corrosion

    Q: I’m using PEEK fasteners in hydrochloric acid but am seeing a slight bit of corrosion or degradation of the fastener. Can you recommend a better polymer for resistance?A: For corrosion in HCL, a better choice may be PTFE screws. PTFE fasteners are virtually inert to most organics, acids and…

    Continue reading
  • Inconel 625 Bolts for 1650F Exhaust Duct

    Q: I need fasteners for an exhaust duct where I want to use bolts to act as a stopper for a blast gate. The max temperature 1650F. Any suggestions? A: In this type of environment, Inconel 625 bolts would be one of the strongest and most temperature resistant materials you…

    Continue reading
  • PEEK Screws for High Temperature Sterilization

    Q: I have a high temperature sterilization process and am using PVDF screws. They seem to be weakening under the temperatures that approach 300F. Any suggestions?A: PEEK fasteners may be a good fit for your application. PEEK screws stay strong and retain their mechanical properties to about 500F. They are…

    Continue reading
  • PEEK Screws for High Strength at 400F

    Q: What would be the highest strength polymer fastener I can use to 400F?A: For this application, probably the best option for you would be PEEK fasteners. PEEK screws are usable to 500F and are available in three levels of strength. Unfilled natural PEEK fasteners offer 16,000 psi tensile strength,…

    Continue reading
  • Super Duplex Bolts Compared to 254 SMO & Titanium

    Q: I need a material with slightly more corrosion resistance than the Super Duplex bolts I’m using. I’m using them in heated salt water for desalination and over time experiencing slight corrosion. Anything that could withstand the salt water better?A: You have a lot of options. One may be 254…

    Continue reading
  • Strength of Hastelloy C276 bolts vs. A4

    Q: Can you tell me how the mechanical properties of C276 compare to the A4 stainless? A: That would depend on the grade of A4 you are talking about but as a rough comparison Hastelloy C276 bolts per ASTM B564 would have a MIN Tensile of 100ksi and a MIN…

    Continue reading
  • Inconel 600 Bolts vs. Inconel 601 Bolts

    Q: Can you tell me what the difference is between Inconel 600 and 601? I need a material for high temperature thermal cycling.A: Both Inconel 600 and Inconel 601 bolts are oxidation resistant at high temperatures. The main difference is that Inconel 600 bolts have a maximum usable temperature of…

    Continue reading
  • Hastelloy C276 Bolts vs Inconel 625 Bolts

    Q: Can you tell me the difference between Hastelloy C276 and Inconel 625? They both seem to be corrosion resistant to sulfuric acid but I also need a high strength material. A: Yes both perform well in sulfuric acid application, but in terms of corrosion resistance, Hastelloy C276 bolts would…

    Continue reading
  • Exposing PEEK Screws to HCl

    Q: What is the max temperature I could expose PEEK screws to HCl?A: This depends on the concentration of the HCl but if you were at about 15%, the PEEK fasteners can be exposed to about 100C of hydrochloric acid solution. See this chart Chemical. That is the max temperature/concentration…

    Continue reading

Questions?

Our material experts are ready to help guide you through your specific application.