Technical Questions – FAQ’s
Last updated
463 posts · page 11 of 31
A286 Bolt Torque Range
Q: Hi, I need a torque range for a A286 (aged, 160 ksi UTS) 1″-8 hex bolt. The calculator gives a torque value of 826 ft lbs but is there a range that is acceptable? A: One thing you have to remember about torque, is it is an approximation. You…
Continue readingPVDF Screws for HCl (hydrochloric acid)
Q: Am I right in understanding that polymer fasteners are chemically resistant? I know they are not nearly as strong or temperature resistant as a metal, but our temperatures are ambient so would this work for me? A: For HCl, you would want to consider PVDF polymer fasteners. These are…
Continue readingPolymers for Coefficient of Expansion and Compression
Q: Which polymer do we offer that would have the smallest compressibility and minimal thermal expansion? We have a very precise laser application. So if the screw changes its dimensions with increasing / decreasing temperatures or loads their device may not be as accurate as it should be. Can you…
Continue readingNumber of Threads for Strength: Fine vs Coarse Threads
Q: I’m designing a process that must be able to handle a high load at about 1000F. I’m planning to use A286, but I now need to know what bolt length size to use to make this machinery stable. I’d like to use as short small of a bolt as…
Continue readingAlloy 330 for 1000C in Cyclic Conditions
Q: Looking for a fastener to bolt together two HAST-X sheets that will be used as part of a furnace fixture assembly. Furnace will be used at temperatures up to 1000°C with cycling from 20°C to 1000°C and back to 20°C over a period of 2 days. This will be…
Continue readingUnderstanding QQ-N-286 and QQ-N-281
Q: My customer is asking me for a hex head that is QQ-N-286 per MIL Spec. Do you know what he is asking for? I’m confused. A: Yes we can help. First let’s look at the QQ-N-286. This refers to material Monel K500. Monel is a nickel alloy used for…
Continue readingA286 Tensile Strength of 160ksi
Q: Your strength chart for A286 says it offers 120-160 ksi tensile strength. What does this mean? And how can I insure I get bolts that are 160ksi? Is this the spec ASTM A453 Grade 660? A: We can insure you get your bolts made to this tensile strength but…
Continue readingPEEK for Low Out-Gassing Aerospace Application
Q: We require materials with low outgassing (conforming to ASTM-E595) for use in a satellite and I have yet to find a polymer screw that could meet these requirements. Any ideas? A: I checked PEEKin NASA’s material out-gassing database. It looks like it will most likely meet the 1% total…
Continue readingWhat Does Specification ASTM F2281 Mean?
Q: My customer is asking for a 1/2″ bolt for a high temperature application to 1300F that is to the spec ASTM F2281. What material is this and what is ASTM F2281? A: The specification ASTM F2281 covers several materials including Inconel, Alloy 330 and A286. The spec does not…
Continue readingHigh Temperature Lock Nuts for Temps Over 900F
I am bolting 321 stainless steel ducts (we are discussing changing to grade 91 alloy but this is only a possibility), and want to use locknuts to minimize potential for debris. The application is at 900-1050F at the bolts, so I am not sure what locknuts are available at this…
Continue readingUnderstanding Different Flat Washers: General Purpose, SAE, USS & Oversize
Q: What is the difference between a general purpose, SAE, USS and oversized washer? Are they all flat washers or different styles. And is one better than the other? A: General purchase, SAE, USS and oversize are all flat washersand all serve the same purpose of distributing the load across…
Continue readingFF-S-86 specification for a Flat Head Socket Cap Screw
Q: Hoping you can help me out. This seems like a technical screw that you may have knowledge on. My customer asked me for a 1/2″-13 x 2″ Long screw FF-S-86 TY IV, QQ-N-281. I’m clear on the size but what does the rest mean? I don’t even know the…
Continue readingTitanium for Deep Stagnant Seawater
Q: I have a deep sea marine application that requires saltwater resistance and tensile strength around 125ksi. In addition to the saltwater and strength parameters, I’m also dealing with waters that can be stagnant. Not sure if that makes a difference. Would Monel K500 be a good choice. A: Monel…
Continue readingDifference Between Worm Drive and Medium Duty Hose Clamps
Q: I’m running a process that requires a titanium hose clamp. I need a clamp that won’t damage the hose and provides a reliable seal as we are dealing with toxic chemicals in a very technical application. Is one type of hose clamp better than the other? A: A worm…
Continue readingPEEK vs Torlon for High Purity Thermal Resistance
Q: I’m looking for polymer that can withstand around 400F for a high temperature sterilization process in a pharmaceutical application. In addition, I also need the polymer to meet FDA and USDA purity standards. Is this possible with Torlon screws. A: Torlon screws are a good high temperature polymer that…
Continue reading
