Technical Questions – FAQ’s
Last updated
463 posts · page 31 of 31
Are ceramic fasteners fragile
Q: Are ceramics fragile? Do I have to worry about them breaking compared to metals? A: Compared to metals ceramic fasteners are indeed fragile. Unlike a metal, there is very little yield before it fractures. Additionally ceramic fasteners and susceptible to thermal shock.
Continue readingGalvanic corrosion using Inconel bolts
Q: Can dissimilar (also called galvanic) corrosion occurs between Inconel bolts and regular carbon steel? A: Anytime you have dissimilar materials you have the potential for galvanic corrosion. For this to happen the materials need to be wet or in some kind of solution. If they are dry it’s greatly…
Continue readingPEEK screws as nylon alternative
Q: Can you provide alternative for a nylon pan head screw? A: Here the customer needed an alternative to nylon. Resistance to electrical fields was a primary concern. In addition, he also needed a material that had a better dissipation factor than nylon. In this situation we would recommend PEEK.…
Continue readingBolts for high temperature vacuum furnace: Metal vs. Ceramic
Q: I’m using a high temperature vacuum furnace at 2500F. What type of material do you suggest using and is there any advantage of using a metal over a ceramic? A: Under vacuum conditions with little to no oxygen present, there are some metallic options for fasteners which include molybdenum…
Continue readingAre Alloy 330 bolts magnetic?
Q: Is Alloy 330 Magnetic? A: Though alloy 330 does contains iron and chromium, it also contains nickel. The nickel component is what helps to strengthen the protective qualities of the chromium however, the presence of nickel also makes this metal non-magnetic. The reason is that the presence of the…
Continue readingHigh temperature capabilities of Polyimide fasteners
Q: Need help with specific needs regarding Polyimide fasteners and their high temperature capabilities A: This Italian company was developing a new client oven. They were interested in Polyimide fasteners and their high temperature capabilities. In particular they needed: - Usability to 300°C - Capability with metal connections - Heat…
Continue readingPEEK and Vespel screws for non-conductive application
Q: Need to replace a standard steel washer with a non-conductive material. A: After speaking with this customer, I learned that he needed to replace a standard steel washer with a non-conductive material for a critical bolted joint. These washers needed to withstand 70°C temperatures while maintaining preload. He had…
Continue readingMP35N bolts for high strength application
Q: We need advice on a material that will deliver a tensile strength of 210 to 250 ksi, as well as help us protect against galling. The attaching areas are stainless steel Grade 8. A: For this instance, we would suggest MP35N. This alloy was developed specifically for high strength…
Continue readingZirconia vs alumina fasteners
Q: What advantages does Zirconia have over Alumina? A: Usually for most high temperature or electric insulator applications where ceramics are needed, alumina ceramic fasteners are the most popular choice due to their properties and relatively affordable price compared to zirconia fasteners. However sometimes the extreme properties of zirconia fasteners…
Continue readingDifference between ziconium and zirconia fasteners
Q: What is the difference between Zirconia and Zirconium? A: Zirconia is a ceramic made from ZrO 2 and Zirconium (Zr) is a refractory metal element found on the periodic table. So while Zirconia is made from Zirconium they are VERY different.
Continue readingCost comparison of Zirconia vs Alumina screws
Q: Why does Zirconia cost more than Alumina? A: 1) Raw material cost: Aluminia is far more abundant, whereas Yttrium oxide which is a stabilizer for Zirconia ceramic, is a rare earth element. 2) Shaping costs: Due to its higher density it takes approximately 10x longer to grind down and…
Continue readingVespel screws high temperature capabilities
Q: Polyimide / Vespel fasteners and their high temperature capabilities A: This client is developing a new oven application and was interested in Polyimide fasteners and their high temperature capabilities. In particular they needed: - Usability to 300 ° C - Capability with metal connections - Heat and electric insolation…
Continue readingCost comparison of Alumina vs Zirconia fasteners
Q: Why does Zirconia cost more than Alumina? A: 1.) Raw material cost. Alumina is far more abundant, whereas Yttrium oxide which is a stabilizer for Zirconia ceramic, is a rare earth element. 2.) Shaping costs. Due to its higher density it takes approximately 10x longer to grind down and…
Continue reading
