Skip to main content
Extreme Bolt & Fastener
Quote

Military

Last updated

Providing Mil Spec fasteners in specialty metals and alloys

Need help choosing a material?

Military Unsplash Free Blue Angels

Extreme Bolt & Fastener has extensive experience and understanding of military specifications for fasteners whether standard parts or custom per-print. In addition, we are able to provide fasteners according to military material specifications (MS Spec and AN Spec fasteners) and to NAS aerospace specifications (NAS or NASM Spec fasteners) as well. Fasteners can also be made to meet DFARS compliance, meaning the metal used in fabrication must be melted or manufactured in the United States or a qualifying country.

Included in our realm of expertise are the following specifications. Please ask our experts regarding any additional specifications you require assistance with. CLICK HERE to download our PDF brochure on our government offerings.

Now offering MS14181 Inconel 718 spline drive tension bolts!

MS and AN Fasteners

In addition to the above specifications, we can also supply Mil Spec (MS) fasteners and Army Navy (AN) fasteners meeting the series below. Additional MS parts are available. Please contact our engineering team for assistance other MS part requirements.

MS Fasteners

  • MS122083
  • MS14144
  • MS14181
  • MS14182
  • MS14183
  • MS14218
  • MS14491
  • MS15795
  • MS16212
  • MS16219
  • MS16562
  • MS16624
  • MS16625
  • MS16633
  • MS16995
  • MS16996
  • MS16997
  • MS16998
  • MS17825
  • MS17828
  • MS17829
  • MS21207
  • MS21209
  • MS21250
  • MS21296
  • MS21301
  • MS21318
  • MS24621
  • MS24622
  • MS24625
  • MS24626
  • MS24627
  • MS24628
  • MS24629
  • MS24630
  • MS24667
  • MS24668
  • MS24671
  • MS24672
  • MS24693
  • MS24694
  • MS25087
  • MS27039
  • MS27183
  • MS27499
  • MS35190
  • MS35191
  • MS35198
  • MS35199
  • MS35202
  • MS35203
  • MS35206
  • MS35207
  • MS35212
  • MS35214
  • MS35215
  • MS35216
  • MS35221
  • MS35223
  • MS35226
  • MS35229
  • MS35233
  • MS35234
  • MS35239
  • MS35247
  • MS35249
  • MS35250
  • MS35264
  • MS35265
  • MS35266
  • MS35273
  • MS35274
  • MS35275
  • MS35276
  • MS35307
  • MS35308
  • MS35309
  • MS35310
  • MS35311
  • MS35335
  • MS35336
  • MS35337
  • MS35338
  • MS35649
  • MS35650
  • MS51479
  • MS51481
  • MS51490
  • MS51492
  • MS51493
  • MS51494
  • MS51575
  • MS51576
  • MS51830
  • MS51831
  • MS51832
  • MS51849
  • MS51850
  • MS51851
  • MS51861
  • MS51862
  • MS51896
  • MS51937
  • MS51957
  • MS51958
  • MS51959
  • MS51960
  • MS51968
  • MS51972
  • MS51975
  • MS63540
  • MS63541
  • MS77068
  • MS9034
  • MS90726
  • MS90727
  • MS90728
  • MS9176
  • MS9321
  • MS9356
  • MS9360
  • MS9390
  • MS9393
  • MS9432
  • MS9456
  • MS9489
  • MS9490
  • MS9493
  • MS9494
  • MS9556
  • MS9557
  • MS9558
  • MS9633
  • MS9677
  • MS9696
  • MS9697
  • MS9698
  • MS9715
  • MS9716
  • MS9751
  • MS9783

AN Fasteners

  • AN10
  • AN123
  • AN1233
  • AN1234
  • AN1236
  • AN23
  • AN24
  • AN25
  • AN3
  • AN320
  • AN386
  • AN3C
  • AN3H
  • AN4
  • AN43
  • AN43B
  • AN44
  • AN4C
  • AN4H
  • AN5
  • AN500
  • AN501
  • AN502
  • AN503
  • AN504
  • AN505
  • AN507
  • AN508
  • AN509
  • AN510
  • AN515
  • AN520
  • AN525
  • AN526
  • AN530
  • AN531
  • AN535

FF-B-561

Mil spec FF-B-561 includes lag bolts having either a square head or a hex head.

Type I – Gimlet point, screw thread
Type II – Cone point, screw thread
Type III – Cone point, fetter drive thread
    Style 1 – Hex head
    Style 2 – Square head

FF-B-588

Mil Spec FF-B-588 covers toggle bolts and screw expansion sleeves.

Type I – Spring-wing toggle bolts, with two-piece wings
Class A – Sheet metal winds
    Style 1 – Machine screw
    Style 2 – Continuous thread stud
    Style 3 – Eyebolt

Class B – Wing wings
    Style 1 – Machine screw
    Style 2 – Continuous thread stud

Type II - Tumble-wing toggle bolts, with one-piece sheet metal wings
Class A - Pivoted bolts
    Style 1 – Machine screw
    Style 2 – Continuous thread stud
    Style 3 – Eyebolt

FF-N-836

Mil spec F-N-836 covers cap, castle, hexagon, knurled, slotted, square, welding and single ball seat nuts.

Type I – Nuts, square
    Style 1 – Regular
    Style 2 – Heavy
    Style 3 – Machine screw

Type II – Nuts, hexagon
    Style 4 – Plain
    Style 5 – Jam
    Style 6 – Thick
    Style 7 – Flat
    Style 8 – Flat jam
    Style 9 – Heavy flat
    Style 10 – Heavy flat jam
    Style 11 – Heavy
    Style 12 – Heavy jam
    Style 13 – Machine screw

Type III – Nuts, cap
    Style 14 – High crown
    Style 15 – Low crown

Type IV – Nuts, slotted
    Style 16 – Plain
    Style 17 – Thick
    Style 18 – Heavy

Type V – Nuts plain, castle
Type VII – Nuts plain, knurled
Type VIII – Nuts, welding
    Style 19 – Without pilot
    Style 20 – Pilot

Type VIII – Nuts, plain, single ball seat, hexagon

FF-P-386

FF-P-386 is superseded by ASME B18.8.1
Mil spec FF-P-386 covers split cotter pins.

FF-S-85

Mil spec FF-S-85 for fasteners covers types and styles of slotted and hexagon head cap screws.

Type I – Slotted Head
    Style 1s – Round head
    Style 2s – Flat countersunk head, 82˚
    Style 4s – Fillister head

Type II – Plain head
    Style 10p – Hexagon head

FF-S-86

Mil spec FF-S-86 covers socket head cap screw fasteners with optional hexagon and spline socket configurations.

    Type I – Hexagon socket, cylindrical head, 1936 series. *
    Type III – Internal multiple spline socket cylindrical head, 1936 series. *
    Type IV – Hexagon socket, flat countersunk head, 82˚ included angle.
    Type V – Internal multiple spline socket, flat countersunk head, 82˚ included angle.
    Type VI – Hexagon socket, cylindrical head, 1960 series.
    Type VII – Internal multiple spline socket, cylindrical head, 1960 series.
    Type VIII – Hexagon socket, button head.
    Type IX – Internal multiple spline socket, button head.
    * Do not use for new design.

FF-S-92

Mil spec FF-S-92C covers slotted, cross-recessed and hexagon head machine screws.

Type I - Slotted
    Style 1s – Round head
    Style 2s – Flat head, 82˚
    Style 3s – Flat head, 100˚
    Style 4s – Fillister head
    Style 5s – Fillister head, drilled
    Style 6s – Oval bead, 82˚
    Style 7s – Truss head
    Style 8s – Binding head
    Style 9s – Pan head
    Style 10s – Hexagon head

Type II – Hexagon, plain
    Style 10p – Hexagon

Type III - Cross-Recessed, Recess Designs I and II
    Style 1c - Round head.
    Style 2c - Flat head, 82˚
    Style 3c - Flat head, 100˚
    Style 4c - Fillister head
    Style 6c - Oval head, 82˚
    Style 7c - Truss head
    Style 8c - Binding head
    Style 9c - Pan head

FF-S-107

Mil spec FF-S-107 covers tooth lock washers for use in assemblies with bolts, studs, and machine screws.

Type I – Internal tooth flat
    Grade A – Regular
    Grade B – Heavy-Duty

Type II – External tooth flat
Type III – Internal -external tooth flat
Type IV – External tooth countersunk (80˚- 82˚)
Type V – External tooth countersunk (99˚- 101˚)
    Style 1 – Twisted teeth
    Style 2 – Teeth with up-and-down bent edges

FF-S-111

Mil spec FF-S-111 covers single and double-threaded wood screws with round, flat countersunk and oval countersunk heads having slotted or cross-recessed drives.

Types I – Single thread
Type II – Double thread

Styles:
    1s – Round head, slotted drive
    1c – Round head, cross-recessed drive
    2s – Flat countersunk head, slotted drive
    2c – Flat countersunk head, cross-recessed drive
    6s – Oval countersunk head, slotted drive
    6c – Oval countersunk head, cross-recessed drive

FF-S-200

Mil spec FF-S-200 covers hexagon socket and spline socket headless setscrews.

Types:
    Type I – Hexagon socket, headless
    Type II – Spline socket, headless

Styles. (Setscrews shall be of the following styles):
    Style 1 – Flat point
    Style 2 – Cone point
    Style 3 – Oval point
    Style 4 – Cup point
    Style 5 – Full-dog point
    Style 6 – Half-dog point

FF-S-210

Mil spec FF-S-210 covers set screws: square head (inch) and slotted (inch and metric).

Types:
    Type I – Square head, inch dimensions
    Type II – Slotted headless, inch dimensions
    Type III – Slotted headless, metric dimensions

Styles. (Setscrews shall be of the following styles):
    Style 1 – Flat point
    Style 2 – Cone point
    Style 3 – Oval point
    Style 4 – Cup point
    Style 5 – Full-dog point
    Style 6 – Half-dog point

FF-W-84

Mil spec FF-W-84 is for (spring) lock washers. This spec covers a helical spring type washer for us with nuts, bolts, screws, and studs to prevent them from loosening.

FF-W-92

Mil spec FF-W-92 covers plain, flat washers.

Type A – Round washer
Type B – Square wash

FF-W-100

Mil spec FF-W-100 covers tooth lock washers for use in assemblies with bolts, studs and machine screws.

Type I – Internal tooth flat
    Grade A - Regular
    Grade B – Heavy duty

Type II – External tooth flat
Type III – Internal-external tooth flat
Type IV – External tooth countersunk (80˚-82˚)
Type V – External tooth countersunk (99˚-101˚)
    Style 1 – Twisted teeth
    Style 2 – Teeth with up-and-down bent edges

MIL-DTL-1222, MIL-S-1222, and MIL-B-857

MIL-B-857 is superseded by MIL-S-1222; MIL-S-1222 is superseded by MIL-DTL-1222
Mil spec MIL-DTL-1222 covers standard studs, hex cap screws, and heavy hex bolts in nominal standard diameters of ¼ inch to 4 inches, nuts in nominal standard diameters of ¼ inch to 3 inches, and socket head cap screws in nominal standard diameters of ¼ inch to 1½ inches for applications where a high degree of reliability is required. MIL-DTL-1222 covers a variety of materials, including:  Nickel Alloys, Corrosion Resistant Steels (CRES), Titanium, and Aluminum.

Studs
    Type I – Full body
    Type II – Reduced body
    Type III – Constant strength body
    Type IV - Continuous thread (bolt-stud)

Bolts
    Type II – Heavy hex
    Type III – Heavy hex structural

Screws
    Type I – Hex cap
    Type II – Socket head cap

Nuts
    Type I – Hex
    Type II – Hex jam
    Type III – Heavy hex
    Type IV – Heavy hex jam
    Type V – Hex slotted

MIL-DTL-18240 and MIL-F-18240

MIL-F-18240 is superseded by MIL-DTL-18240.
Mil spec MIL-DTL-18240 defines the requirements for self-locking elements for use in externally threaded fasteners such as bolts and screws to be used in fasteners with either UNC, UNJC, UNF, UNJF, UNRC or UNRF threads and where the temperatures will not exceed 250°F. It includes three types of self-locking elements:
    Type N – Plug/pellet
    Type L – Strip
    Type P – Patch

NASM 25027, MIL-DTL-25027 and MIL-N-25027

MIL-N-25027 is superseded by MIL-DTL-25027; MIL-DTL-25027 is superseded by NASM 25027.
Mil spec NASM25027 covers the requirements for steel, corrosion resistant steel (CRES), aluminum alloy, copper alloy and nickel-copper alloy (Monel 400) self-locking nuts.
    250˚F nuts
    450˚F nuts
    800˚F nuts

MIL-F-19700

Mil spec MIL-F-19700 describes the characteristics of nonmagnetic, screw threaded fasteners and related items that are dimensionally in conformance to recognized military and industrial standards. The intent of this specification is to supplement, not supersede, the specifications normally used for the acquisition of threaded fasteners and related items.

Bolts
    Type I – Round head
    Type II – Hexagon head
    Type III – Hexagon head, UNC-3A (for use with type V self-locking nuts)
    Type IV – Finished neck, countersunk, flat head

Machine screws
    Type I – Flat head, 82˚, cross recessed
    Type II – Pan head, cross recessed
    Type III – Fillister head, slotted and drilled
    Type IV – Flat head, 82˚, slotted
    Type V – Pan head, slotted

Wood screws
    Type I – Flat head, 82˚, cross recessed
    Type II – Round head, cross recessed
    Type III – Oval head, cross recessed
    Type IV – Flat head, 82˚, slotted
    Type V – Round head, slotted
    Type VI – Oval head, slotted

Lag screws
    Type I – Square bolt head
    Type II – Slotted countersunk head

Studs
    Type I – Full body

Nuts
    Type I – Hexagon, top chamfered, machine screw
    Type II – Hexagon, regular finished
    Type III – Hexagon, regular finished jam
    Type IV – Square, regular
    Type V – Hexagon, self locking nylon insert (Class C material only).

Cap screws
    Type I – Hexagon head

Pins
    Type I – Split cotter

Washers
    Type I – Metal, flat, plain, round
    Type II – Spring, nonlink lock
    Type III – Internal tooth, flat lock
    Type IV – External tooth, flat lock

MIL-I-8846

Mil spec MIL-I-8846 covers helical coil screw-thread inserts made from formed wire, the inner surfaces of which, after assembly, provide threads as specified.

Type I – Coarse thread
    Class 1 – Free running
    Class 2 – Screw locking (self-locking)

Type II – Fine thread
    Class 1 – Free running
    Class 2 – Screw locking (self-locking)

Type III – Taper pipe thread
    Class 5 – NPT pipe thread
    Class 6 – ANPT pipe thread

Type IV – Metric
    Class 3 – Staking (spark plug thread)

MIL-DTL-32258 and MIL-N-25027/1

MIL-N-25027/1 is superseded by MIL-DTL-32258.
Mil spec MIL-N-25027 covers the requirements for nickel-copper alloy (Monel 400 and 405), self-locking heavy hex nuts.

MIL-P-10971

Mil spec MIL-P-10971 covers tubular-shaped spring pins constructed to resist reduction in pin diameter by means of spring action.

Type I – Slotted
Type II – Coiled

Classes:
    Class 1 – Heavy duty
    Class 2 – Standard duty
    Class 4 – Light duty

MIL-P-16610

Mil spec MIL-P-16610 covers carbon, alloy and corrosion-resisting steel taper pins.

MIL-P-21143

Mil spec MIL-P-21143 covers solid, cylindrical, steel, headless straight pins, which are commonly referred to as dowel or machine pins.

MIL-PRF-907F

Mil spec MIL-PRF-907F covers antiseize compound for use on threads of steel nuts, studs, bolts and other mating surfaces, including those of superheated steam installations, at temperatures up to 1050 degrees Fahrenheit (°F) (566 degrees Celsius (°C)).

MIL-S-21472

Mil spec MIL-S-21472 covers hexagon socket-head shoulder screws and slotted-head shoulder screws.

MIL-S-24149

Mil spec MIL-S-24149 covers studs for welding with stud welding equipment and arc shields (ferrules) for shielding studs where applicable.

MS14181

This MS part is a high Strength nickel alloy 718 spline drive bolt. MS14181 bolts are offered by Extreme Bolt with a 5-6 week lead, no minimum order quantity. Click here to learn more.

Military - Frequently Asked Questions

What does DFARS compliance mean for military fasteners?

DFARS compliance means the metal used to fabricate the fastener must be melted or manufactured in the United States or a qualifying country. Extreme Bolt & Fastener can make fasteners to meet DFARS compliance.

Do military fasteners require traceability and stringent specifications?

Yes, military fasteners can require stringent specifications and traceability. Extreme Bolt & Fastener has extensive experience with military specifications for both standard parts and custom per-print fasteners.

Which military specifications can Extreme Bolt & Fastener supply fasteners to?

We supply fasteners to military specifications (MIL and FF series), military material specifications (MS Spec and AN Spec), and NAS aerospace specifications (NAS or NASM Spec). We also handle custom per-print parts and can assist with additional specifications on request.

What materials can military fasteners be made from?

Extreme Bolt & Fastener provides Mil Spec fasteners in specialty metals and alloys, and has extensive experience meeting military specifications in those materials for both standard and custom parts.

Do you offer MS14181 Inconel 718 spline drive tension bolts?

Yes. We now offer MS14181 Inconel 718 spline drive tension bolts with a 5-6 week lead time and no minimums.

What is MIL spec FF-B-561?

Mil spec FF-B-561 covers lag bolts having either a square head or a hex head.

Questions?

Our material experts are ready to help guide you through your specific application.