Technical Questions – FAQ’s
Last updated
463 posts · page 25 of 31
Alloy 20 vs. Hastelloy C27 Bolt for H2SO4
Q: I have a hot sulfuric acid application that utilizes approximately 25-32% sulfuric acid. I really need a corrosion resistant bolt but due to the vastness of the operation, I’m wondering if there is a lower cost option than Hastelloy.A: For hot sulfuric acid in your concentration range, we would…
Continue readingMP159 Screws for High Temperatures
Q: I’m in the testing phase of a new application that will require a high strength bolt that has a yield strength of about 220ksi. The biggest problem is that the bolts will also be exposed to burst of high temperature of about 1000F. Is there any material you can…
Continue readingPreventing Fastener Galling
Q: I’m having issues with thread galling. We’ve switch to coarse threads and tried to slow down installation speed/over-tightening. Any other ways we can prevent this? A: There are a few other things to consider in reducing thread galling. First, when possible use dissimilar metals with different hardness. Having material…
Continue readingDuplex Bolt Corrosion
Q: I need some bolting to attach some surface steam piping for a power industry project. They’re using duplex bolts now but its showing some slight corrosion. Chlorides are involved and maybe some other contaminants. Ideas?A: Surface steam condensers and other power industry elements that are exposed to salts and…
Continue readingHastelloy C276 Bolts or Duplex Bolts for Waste Water HCl Injection
Q: We’re making some changes in our waste water treatment process and are going to using hydrochloric acid (HCl) as a means of lowering the pH levels. Will I need to upgrade my duplex bolting? A: Assuming your waster water is at ambient temperatures the only thing you need to…
Continue readingMonel K500 Bolt for Salt Water Corrosion
Q: We have some machinery operating in salt fog with sea spray as well. Salt corrosion is an issue but most importantly I need bolts with a yield strength over 100ksi. Any thoughts? A: For this environment you have two options. First, with a yield strength of 110ksi I’d suggest…
Continue readingPolymer or Metal Screws for High Temperatures
Q: I’m working with a process that requires a constant operating temperature of 450F. Do I need to use a metal screw or is there a polymer that can handle this? A: There are definitely polymers that can handle an environment of 450F. One option is a PEEK fastener. PEEK…
Continue readingHastelloy C276 Bolts – Sulfuric Acid Condensation
Q: I have a situation where I’m not only dealing with a hot steam environment which can reach 700F but there is also sulfuric acid condensation that can form during cool down periods. Are their any materials that can handle heat and corrosion? A: Typically when dealing with sulfuric acid…
Continue readingHastelloy C276 Bolts for Sour Gas
Q: I’m having trouble with corrosion of our bolts in a sour gas well environment and we are currently using a super duplex stainless steel. Can you help me with a bolting material that would be improved? A: Hastelloy C276 bolts are ideal for sour gas environments and would be…
Continue readingPTFE Screws for Laboratory Corrosion
I’m running some laboratory testing in a mixed acid environment and would like to use a corrosion resistant polymer as apposed to a metal. I’ve tried PEEK screws but am still struggling a bit with some acids. Is there anything better? PEEK screws provide reasonable corrosion resistance to most acids…
Continue readingCoastal Marine Corrosion of Bolts
Q: I’m running a coastal power operation and am having some corrosion on my stainless steel bolts that are outside. Can salt air do that? And any suggestions on a material. I need high volume so I need to go with something economic. A: Salt air can cause corrosion. If…
Continue readingDuplex Washers for Salt Corrosion and Magnetic Needs
I’m looking for a non-corroding and magnetic washer for use in a salt water environment. Specifically, we plan to weld this washer onto a 316 stainless basket so that it can be attached to a magnet. Currently we are using 302 stainless baskets, which are magnetic enough to attach to…
Continue readingA286 Shoulder Bolts for High Temperature
Q: I need a shoulder bolt that will not change its shape at elevated temperatures. The bolt is near a mild carbon steel welding process and is under a small load. It is not in the heat affected zone, but it does see an elevated temperature. I am not sure…
Continue readingTitanium Fasteners for Sea-Water & Galvanic Corrosion
Q: I need a salt water corrosion resistant screw that will work well to fasten an aluminum housing for deep sea equipment. I am concerned about galvanic corrosion. What material should I consider? A: Since you are using fasteners in an ocean environment and in contact with aluminum you have…
Continue readingPEEK Screw Strength vs FDA Approved PTFE Screws
Q: I work in the food industry and need a larger sized polymer fastener sized 1/4-20 x 2.5″. I tried PTFE but it isn’t does not seem to have enough strength. It also needs to be FDA approved and offer moderate corrosion resistance. A: Not knowing the specific strength requirements…
Continue reading
