Silicon Bronze Fasteners - Bolts, Screws & Nuts
Last updated
A copper alloy with excellent electrical conductivity & resistance to salt water
Need help choosing a material?
- Excellent electrical conductivity due to its high copper content
- Good corrosion resistance in salt water and mild chemicals
- Galling resistant
- Common Grades – C65500 & C65100 chemistry and specs
- Physical and mechanical properties of C65500 and C65100
Silicon bronze bolts, screws and nuts are often used for their salt water corrosion resistance. Marine applications also look to silicon bronze bolts for their added benefit of being anti-biofouling. This attribute prevents the buildup of marine organisms on the material’s surface. Silicon bronze screws also offer a good level of strength – close to that of 316 stainless. Their seawater corrosion performance and strength are not as good as Monel or Titanium. Silicon bronze bolts are also slightly less effective in salt water (especially if its polluted) compared to Duplex bolts. Overall silicon bronze screws are viewed as a cost-effective solution to saltwater applications. In addition, Extreme Bolt can offer mil-spec silicon bronze fasteners which is required for many naval projects.
Beyond its usage in marine environments, one of the most notable characteristics of silicon bronze bolts is their high electrical conductivity. This makes silicon bronze screws ideal for applications where efficiently moving electrical current is important.
Lastly, silicon bronze fasteners are non-magnetic and have a very low magnetic permeability. Depending on requirements, this can also be important for eletronic applications.
Common Grades of Silicon Bronze Fasteners
Low Silicon Bronze 651 (Also referred to as 65100)
This grade of silicon bronze bolts has approximately 96% of copper and ~1.5% silicon. Having a higher percentage of copper than the 655 variety, grade 651 offers higher tensile and yield strength, but lower elongation.
High Silicon Bronze 655 (Also referred to as 65500)
This grade of silicon bronze has approximately 95% copper and ~ 3% silicon. This composition makes the alloy very ductile, but also weaker than its sister grade C65100.
Silicon Bronze Chemistry and Specifications
Silicon Bronze 655 / 65500 Chemistry and Specifications
HIGH SILICON BRONZE 655 SPECIFICATIONS (65500): UNS C65500, ASTM F467 (Bolts /Screws) ASTM F468 (Nuts)
| Silicon Bronze C65500 | Cu | Si | Zn | Mn | Fe | Ni | Pb |
|---|---|---|---|---|---|---|---|
| Min % | - | 2.8 | - | 0.50 | - | - | - |
| Max % | Bal | 3.8 | 1.5 | 1.3 | 0.8 | 0.6 | 0.05 |
| Physical Properties | |
|---|---|
| Melting Point - Liquidus (°F) | 1,880 |
| Melting Point - Solidus (°F) | 1,780 |
| Density (lb/cu in. at 68°F) | 0.308 |
| Specific Gravity | 8.53 |
| Electrical Conductivity (% IACS at 68°F) | 7 |
| Thermal Conductivity (Btu/ sq ft/ ft hr/ °F at 68°F) | 21 |
| Specific Heat Capacity (Btu/ lb /°F at 68°F) | 0.09 |
| Modulus of Elasticity in Tension (ksi) | 15,000 |
| Modulus of Rigidity (ksi) | 5,600 |
| Diameter | Hardness (HRB) | Tensile (ksi) | Yield (ksi) | Elongation (4D, Min %) |
|---|---|---|---|---|
| All | 60-80 | 50-80 | 20 | 20 |
Properties Per ASTM F468 | ||||
Silicon Bronze 651 / 65100 Chemistry and Specifications
LOW SILICON BRONZE 651 SPECIFICATIONS (65100): UNS C65100, ASTM F467 (Bolts /Screws) ASTM F468 (Nuts)
| Silicon Bronze C65100 | Cu | Si | Zn | Fe | Mn | Pb |
|---|---|---|---|---|---|---|
| Min % | - | 0.8 | - | - | - | - |
| Max % | Bal | 2.0 | 1.5 | 0.8 | 0.7 | 0.05 |
| Physical Properties | |
|---|---|
| Melting Point - Liquidus (°F) | 1,940 |
| Melting Point - Solidus (°F) | 1,890 |
| Density (lb/cu in. at 68°F) | 0.316 |
| Specific Gravity | 8.75 |
| Electrical Conductivity (% IACS at 68°F) | 12 |
| Thermal Conductivity (Btu/ sq ft/ ft hr/ °F at 68°F) | 33 |
| Specific Heat Capacity (Btu/ lb /°F at 68°F) | 0.09 |
| Modulus of Elasticity in Tension (ksi) | 17,000 |
| Modulus of Rigidity (ksi) | 6,400 |
| Diameter | Hardness (HRB) | Tensile (ksi) | Yield (ksi) | Elongation (4D, Min %) |
|---|---|---|---|---|
| 1/4" - 3/4" | 75-95 | 70-100 | 55 | 8 |
| 7/8" - 1.5" | 75-95 | 55-90 | 40 | 8 |
Properties Per ASTM F468 | ||||
Silicon Bronze fastener styles
Silicon Bronze Screws
Silicon Bronze Bolts
Silicon Bronze Studs & Threaded Rods
Silicon Bronze Washers
What our customers say
More customer feedback“I purchased from you specifically because of Jon’s expertise and professionalism.”
“Very impressed; good prices and delivered earlier than lead time given, which was a real bonus.”
“Extreme Bolt is definitely on my go-to list.”

















