Skip to main content
Extreme Bolt & Fastener
Quote

MP35N Fasteners - Bolts, Screws & Nuts

Last updated

One of the highest strength alloys available to industry

Need help choosing a material?

MP35N Unsplash Free Rocket

MP35N (2.4999) fasteners are known for their extraordinary strength and are the strongest fasteners we offer at Extreme Bolt. MP35N fasteners owe their extraordinary strength to a unique alloy combination of nickel, cobalt, chrome and molybdenum. These fasteners have a minimum 260ksi ultimate tensile strength, which typically reaches ~285ksi.

Beyond the strength of MP35N fasteners, they are also exhibit good corrosion resistance and can resist most mineral acids, hydrogen sulfide, seawater and salt spray environments.

MP35N fasteners are also resistant to high temperature oxidation and could operate in environments up to 800°F and still maintain much of its strength.

Applications where MP35N fasteners are often found are: aerospace, defense, marine, chemical processing, oil and gas and medical.


MP35N (2.4999) Chemistry, Spec and Heat Treatments

Heat Treating & Aging: MP35N is usually supplied in heat treated and cold drawn condition AMS 5844. In this state the MP35N can be worked into the desired fastener form and aged to the AMS 5845 specification. Once aged, the MP35N material could achieve it full strength potential. 

MP35N Specifications:  UNS R30035, AMS 5844, AMS 5845, AMS7468, ASTM F562, NACE MR0175

MP35N — table
MP35NNiCoCrMo
Typical %35352010

MP35N Mechanical Data (Dependent of Part Size)

Guarenteed Minimum Properties — table
Guarenteed Minimum PropertiesNominal Properties
UTS (ksi)Yield Strength
(0.2%) ksi
Elongation
(% 4D)
RA (%)HRCUTS (ksi)Yield Strength
(0.2%) ksi
Elongation
(% 4D)
RA (%)HRC
MP35N Cold Drawn Full Strength26023083544 min28527594550

MP35N Corrosion Data

MP35N - Corrosion Data
MediaCorrosion
Resistance
MediaCorrosion
Resistance
Nitric AcidGoodSulfuric AcidGood
Phosphoric AcidGoodAcetic AcidExcellent
Sodium HydroxideGoodSalt Spray (NaCl)Excellent
Sea WaterExcellentSour Oil/GasExcellent
Important Note: The following 4-level rating scale is intended for comparative purposes only for this materials only. Corrosion testing is recommended; factors which affect corrosion resistance include temperature, concentration, pH, impurities, aeration, velocity, crevices, deposits, metallurgical condition, stress, surface finish and dissimilar metal contact.

MP35N - Frequently Asked Questions

Answers from our engineers, drawn from the MP35N technical questions we're asked most.

Quick Guide to Aerospace Fastener Materials

<p <img src="/blog/2026/06/MP35N photo-300x206.png" alt="" width="300" height="206" data-align="left" / </p <p Aerospace materials are not just components, they are mission-critical decisions. Every fastener must perform flawlessly. As an <a href="/quality" AS9100 certified</a supplier, the engineers at Extreme Bolt have in-depth knowledge to guide you through some of the most relevant <a href="/industries/aerospace" aerospace fastener</a materials.</p <p </p <p </p <p </p <table <tbody <tr <td <a href="/materials/inconel" <img src=" alt="inconel 718 box6 2 v3" width="442" height="896" / </a </td <td <a href="/materials/a286" <img src=" alt="a286 box6 2" width="441" height="899" / </a </td </tr <tr <td <a href="/materials/waspaloy" <img src=" alt="waspaloy box6 2" width="442" height="899" / </a </td <td <a href="/materials/mp35n" <img src=" alt="mp35n box6 2 v2" width="437" height="898" / </a </td </tr <tr <td <a href="/materials/titanium/grade-5" <img src=" alt="titanium box6 2" width="439" height="896" / </a </td <td <a href="/materials/aluminum-7075" <img src=" alt="alum box6 2 v2" width="434" height="897" / </a </td </tr </tbody </table <p </p

I am looking for high strength bolts, any that are > 160ksi yield?  Is A286 an option?

A286 cold worked – which is one of the strongest version of an A286 bolt – has a 160ksi ultimate tensile strength, but not the yield strength. However if 160 ksi yield is needed, there are some other options to keep in mind if you need guaranteed min yield over 160ksi, like Inconel 718 (Cold Worked version 220KSI UTS, 200ksi min yield) and MP35N bolts having a min yield of 230ksi. Additionally, a more budget friendly option would be 17-4 stainless steel bolts in the H900 condition. This is a stainless steel material that has a 170ksi min yield but low elongation.

Would you be able to recommend a high temperature and strength material to replace Inconel 718?  We are using 718 fasteners into a 718 threaded bracket, and we’re concerned about galling/seizing of the same material. We need a material with similar strength at high temperature. Also are anti-seize lube flammable?

There are very few materials that match the properties of Inconel 718 bolts with the exception of materials like MP35N. Its main component is Cobalt, so it will provide some alloy differentiation however it is very expensive. While differing the materials is generally a good way to avoid galling on more common alloys, a better approach on such a high performing alloy may be to utilize a high temperature moly-disulfide anti-seize or silver plating on Inconel 718 bolts. Our high temperature anti-seize has a service temperature up to 1300C, and is not flammable.

I’m a research engineer and I wanted to see if you could comment on the maximum temperatures of MP35N. I’ve heard that it can be used to 1200F. Is this the case, and what would the strength be at this temperature?

Regarding higher temperatures for MP35N bolts, I know, if you go beyond 1000F you begin the aging process and could permanently alter the materials strength properties. So typically this is not recommended for MP35N bolts.

What is the strongest metal for bolts?

MP35N bolts are made from one of the strongest alloys available to industry. MP35N bolts offer a typical ultimate tensile strength of 285ksi and a yield strength of 277 ksi. As an expensive alloy, it is used for the most extreme strength situations such as aerospace and oil & gas applications. Its sister alloy MP195 offers slightly less strength of typically 275ksi UTS and 265ksi yield. These alloys are extremely strong but can only be used in moderate temperatures: MP35N bolts have a max of 800 ° F and MP195 bolts have a max of 1100 ° F .For materials that offer a combination of high strength and high temperature use the go to alloys are Inconel 718 bolts, Waspaloy bolts and A286 bolts; as well as popular European alloy Nimonic bolts: Typical strengths: Inconel 718: 210ksi UTS max, 175 ksi yield, Max temp use of 1300 ° FWaspaloy: 193ksi UTS max, 132 ksi yield, Max temp use of 1600 ° FNimonic 80: 181ksi UTS max, 113 ksi yield, Max temp use of 1500 ° FA286: 160/120ksi UTS, 120/85 ksi yield, Max temp use of 1300 ° F

Is there a MIL spec or NAS spec for MP35N socket head cap screws?

No, there is not an MS or NAS spec that covers MP35N socket head cap screws. For an MP35N socket head, typically we would offer per dimensions of NAS 1351 [or 1352] with material per AMS 5844, Aged to Min 260 ksi UTS, Min 230 ksi Yield.

What our customers say

More customer feedback
“I purchased from you specifically because of Jon’s expertise and professionalism.”
“Very impressed; good prices and delivered earlier than lead time given, which was a real bonus.”
“Extreme Bolt is definitely on my go-to list.”

Questions?

Our material experts are ready to help guide you through your specific application.