Alloy 926 Fasteners - Bolts, Screws & Nuts
Last updated
A corrosion resistant 6Mo alloy similar to AL6XN and SMO254
Need help choosing a material?
-
Higher corrosion resistant substitute for 316L
- Corrosion resistance comparable to Super Duplex 2507
- Similar chemistry to AL6XN and SMO 254
- Chemistry and specifications of Alloy 926
Alloy 926 (1.4529) screws are the perfect substitute for 316L when higher corrosion resistance is required without additional strength. Alloy 926 fasteners are considered a 6-Moly alloy (6 Mo or 6% Molybdenum) like sister alloys AL6XN and SMO 254. Within the class of stainless steels, these 6 Mo alloys are considered to be very corrosion resistant. Bolts made from Alloy 926 are a super-austenitic molybdenum stainless steel offering corrosion resistance comparable to Super Duplex 2507 but with slightly lower strength and cost. Almost identical in chemistry to 6 Moly alloys AL6XN and SMO 254, Alloy 926 is often chosen for paper plants, desalination and weak acid environements.
In addition, Alloy 926 fasteners are also similar in composition to 904L, but with increased nitrogen and molybdenum providing Alloy 926 bolts improved general corrosion resistance as well as resistance to pitting and crevice corrosion. Because of Alloy 926 resistance to chloride stress corrosion cracking, it makes 926 fasteners ideal for use in desalination, and pulp and paper plants. This alloy is also good option for diluted sulfuric and phosphorus acid applications.
Mechnical Properties
- Tensile Strength: 94 ksi
- Yield Strength: 43 ksi
- Elongation: 35%
- Rockwell B Hardness: 86
- Density: 0.29 lb/in³
- Temperature Limits: 750ºF / 400ºC
| Alloy 926 | Fe | Ni | Cr | Mo | Mn | Cu | Si | N | P | C | S |
|---|---|---|---|---|---|---|---|---|---|---|---|
| Min % | - | 24.00 | 19.00 | 6.00 | - | 0.50 | - | 0.15 | - | - | - |
| Max % | Bal | 26.00 | 21.00 | 7.00 | 2.00 | 1.50 | 0.50 | 0.25 | 0.03 | 0.020 | 0.01 |
Alloy 926 fastener styles
Alloy 926 Screws
Alloy 926 Bolts
Alloy 926 Studs & Threaded Rods
Alloy 926 Washers
Alloy 926 - Frequently Asked Questions
Answers from our engineers, drawn from the Alloy 926 technical questions we're asked most.
I have some 316 bolts that are experiencing slight corrosion from a mild chloride environment. I need an economic solution but a more corrosion resistant material. Any ideas?
You have a few options here but you should consider a class of alloys called 6 Mo or 6 Moly alloys (AL6XN, SMO254 and Alloy 926). These alloys offer improved resistance over 316 in chlorides and salt water. If greater strength is needed you could step it up to Super Duplex 2507 boltswhich offer similar corrosion resistance but with added strength of 125 ksi tensile strength (compared to 94 ksi of Alloy 926)
What our customers say
More customer feedback“I purchased from you specifically because of Jon’s expertise and professionalism.”
“Very impressed; good prices and delivered earlier than lead time given, which was a real bonus.”
“Extreme Bolt is definitely on my go-to list.”



















