Skip to main content
Extreme Bolt & Fastener
Quote

Technical Questions – FAQ’s

Last updated

463 posts · page 17 of 31

  • Inconel 625 vs Nitronic 60

    Q: Can you explain to me the difference between Inconel 625 and Nitronic 60 in terms of high temperatures? Both seem to be able to handle temps up to 1800F but which is better?A: Well that depends on what you are using them for. Inconel 625 boltsare a nickel-chrome based…

    Continue reading
  • Oxidation Resistance for Heat Treating

    Q: I am interested in 1/4″ x 2 1/2′ bolts and nuts that can resist oxidation up to 2000F. The application they are needed for would be to hold together a steel frame meant to hold tool steel in position preventing distortion during the heat treating process. I would like…

    Continue reading
  • Polymer Marine Lock Nut

    Q: I’m looking for a polymer insert locknut for a marine environment. Can you make any suggestions? A: In your marine lock nut application, the polymer you should consider for the locking mechanism would be PVDF (Kynar). PVDF polymer in combination with the lock nut would perform very well in…

    Continue reading
  • Inconel Bolts for High Temperature

    Q: I have an application that needs an alloy to withstand 2100° F with no preload. Would Hastelloy be a good choice?A: Probably not. Hastelloy fasteners have a max usable temperature of 1500°F and is primarily used for corrosion resistance. For these temperatures Inconel boltsare a better choice as it…

    Continue reading
  • Alloy 330 vs 310 Stainless Steel Fasteners

    Q: What is the difference between alloy 330SS and 310SS bolts? A: Good question. Alloy 330 and 310 are fairly similar however there are some differences. Alloy 330 fastenersoffer high temperature protection, oxidation and carburization resistant to 2100°F whereas 310SSmaxes out at 2000°F. In addition, alloy 330 bolts provide improved…

    Continue reading
  • Flanges for High Pressure Sulfuric Acid

    Q: I have a high pressure application that exposes my flanges to sulfuric acid? Can you suggest the best flange and material for this situation? A: For high pressure applications weld neck flanges have a beveled end that, when connected to a pipe, creates a trough for a strong weld…

    Continue reading
  • Flanges for Saltwater

    Q: I need a high strength salt water resistant flange for a naval application. Will be in rapidly moving seawater.A: Here I would suggest a Monel K500 flange. Monel K500 is extremely strong as it is age hardened. It offers 160 ksi of ultimate tensile strength. Also Monel flanges offer…

    Continue reading
  • PEEK Flange for Sterilization Process

    Q: I need a polymer flange that for a sterilization process. It would need to withstand temps of about 300F. Any suggestions? A: For this situation I would suggest a PEEK flange. PEEKis strong to temps of about 500F and performs excellently in both high temperature steam and water sterilization,…

    Continue reading
  • Non-conductive Screw with Strength of Steel

    Q: We are looking for a non-conductive screw that gets close to the strength of 316 stainless steel, ideas? A: The best we could offer would be our glass fiber reinforced PEEK screws. It has nearly double the tensile strength as natural PEEK at about 22,800 psi. You could also…

    Continue reading
  • PEEK Threaded Rod for Hydrochloric Acid Resistance

    Q: I’m looking for threaded rods and nuts that would need to be able to withstand a potential exposure to ferric chloride and constant exposure to 3% hydrochloric acid which could reach 31% in a rare instance, would this PEEK withstand these chemicals? A: PEEK fasteners work well with harsh…

    Continue reading
  • Inconel 600 Bolts & Alloy 330 Bolts for High Temperature Oxidation

    Q: I have an application that requires high temperature oxidation resistance up to about 2000F. Any suggestions?A: For these conditions there are two options I would suggest. You could try Inconel 600 bolts which are usable to 2000F. They offer excellent carburization and oxidation resistance. Since your process is at…

    Continue reading
  • PTFE Screws for High Temperature Corrosion Resistance

    Q: I need a polymer fastener that offers the best corrosion resistance at high temperatures. I’m using a low percentage of H2SO4 but temps can get up to 300F. Any ideas?A: The best polymer fastener for high temperature corrosion resistance is PTFE screws. PTFE fasteners offer excellent corrosion resistance and…

    Continue reading
  • Titanium Grade 5 for Medical Implant Bolting

    Q: We are researching a bolt to be used in a medical implant? Is there a standard material you can suggest?A: While there are a variety of possibilities depending on the requirements for the screw, a go to material for many implantable fasteners for good strength and biocompatibility, is Titanium…

    Continue reading
  • C276 Bolting for Valve in NaCl

    Q: We are using A4 stainless bolting on Hastelloy C22 valves for a process that involves NaCl processing media. We are experiencing corrosion. Can you suggest a bolt that would help eliminate this. Can you make any suggestions? Also could you share the mechanical properties of any suggestions as well.…

    Continue reading
  • Do ceramic fasteners provide strength?

    Q: Do ceramic fasteners provide strength? A: The answer to your question is both yes and no. They provide decent tensile strength similar to some stainless steels(Aluminia bolts has a tensile strength of 30 ksi and Zirconia screws 75 ksi), however they don’t have any yield strength. Due to the…

    Continue reading

Questions?

Our material experts are ready to help guide you through your specific application.