Skip to main content
Extreme Bolt & Fastener
Quote

High Temperature

Last updated

From cryogenic, 20°C, 200°C or 2000°C we cover it all...

Need help choosing a material?

Whatever the temperature of your application, Extreme Bolt & Fastener offers fasteners that are designed to endure the most challenging environments in the form of specialty metal, specialty polymer and advanced ceramic high temperature fasteners.

USABLE TEMPERATURE LIMIT GUIDEActual Limits Are Application Specific.
Consult An Expert.
MaterialsUsable Temp Limit
(°F)
Usable Temp Limit
(°C)
Advance Ceramics
Alumina Ceramic30001650
Zirconia Ceramic (YSZ)40002200
Specialty Metals
Tantalum (Vacuum)36002000
Tungsten (Vacuum)36002000
Molybdenum (Vacuum)29121600
Alloy 23021001149
Alloy 33021001148
Inconel 60121001148
Inconel 60020001095
310 SS20001090
Inconel 6251800982
Nitronic 601800982
Waspaloy1600871
Nimonic 80A1500815
Hastelloy C2761500815
Incoloy 800, 8251400760
Inconel 7181300700
A2861300700
Incoloy 9251200650
Nitronic 501200650
Nimonic 751200650
Molybdenum (Air)1112600
MP1591100593
Monel1100593
Alloy 201000538
AL6XN1000538
Zirconium 705800426
MP35N800426
Alloy 926750400
Aluminum 7075750400
254 SMO700371
Zirconium 702700371
Titanium Grade 5660350
17-4PH600316
Nickel 200600316
Tantalum (Air)572300
Titanium Grade 2572300
Tungsten (Air)572300
Duplex / Super Duplex570300
Engineered Polymers
PI (Vespel®)572300
PAI (Torlon®)527275
PEEK (Victrex®)500260
PTFE500260
PVDF (Kynar®)300150
Nylon (Reference)212100
 

High Temperature Fasteners - Frequently Asked Questions

What bolt material do you recommend for a high-temperature annealing oven or furnace?

A286 is a frequently recommended alloy for high-temperature and thermal-cycling bolting, such as annealing ovens and exhaust systems. For especially demanding cyclic conditions, alloys like Alloy 330 are also considered, so the best choice depends on the exact temperature and cycling profile.

Can PEEK or Vespel screws be used at around 200 degrees C?

Yes. High-strength polymer options such as PEKK, PEEK, and Vespel (PI) can serve at roughly 200 degrees C in air-only applications where no chemical resistance is needed. Below 300 degrees C (572 degrees F), lightweight plastic fasteners are generally a great option.

Can 316 stainless steel be used at 1500 degrees F?

316H is expected to survive 1500 degrees F without significant oxidation, but at that temperature strength falls off and should be evaluated for the load. Confirm suitability for your specific application before relying on it.

What is the highest temperature your fasteners can handle?

Advanced ceramic fasteners made from alumina or zirconia represent the ultimate in high-temperature fasteners, capable of use at temperatures well beyond 2000 degrees C. These are used where temperatures exceed the usable limits of metals.

Which materials are available for high-temperature fasteners?

Options span three families: specialty metals like Inconel for furnaces, nuclear, and refractory metal processing; thermally resistant polymers including PTFE, PEEK (Victrex), PI (Vespel), and PAI (Torlon); and advanced ceramics such as alumina and zirconia for extreme temperatures.

When are plastic fasteners a good choice for high-temperature use?

When application temperatures are below 300 degrees C (572 degrees F), lightweight engineered polymer fasteners are a great option. Above the usable limits of polymers, specialty metals are used, and beyond the limits of metals, advanced ceramics are necessary.

Questions?

Our material experts are ready to help guide you through your specific application.