Skip to main content
Extreme Bolt & Fastener
Quote

Studs

Last updated

Made of specialty metals, polymers and ceramics

StudsStuds are a threaded rod that is less that 12" long. They have no screw head and no inset driver like a set screw. Studs are available fully threaded, partially threaded (ends only) or with custom thread lengths.

Stud Sizes

  • #2 - 6"
  • M1.2 - M100

Stud Specifications

  • ASME B18.31.2
  • DIN 976

Stud Sizes

The length of a stud goes up to 12" long. Lengths longer than 12" (1 foot) is considered a threaded rod.

  • #2 - 6"
  • M1.2 - M100

Stud Terminology

Studs can be threaded in two ways. These ways an alter the measurement of the stud anywhere from 1/4" to 1/2" difference in length.

  1. First to First: In this case the length of the stud is measured from the beginning of the first thread on end 1 to the beginning of the first thread on end 2.
  2. Overall Length: This method measures the length of the stud from on physical end the other.

Thread Options

Visit our thread options page for more information on Extreme Bolt's threading capabilities:

  • Thread types and attributes
  • Classes and tolerances
  • How threading can affect bolt performance
  • Specialty threads

Studs - frequently asked questions

What is the difference between a first-to-first and overall length stud measurement, and why does it matter?

Studs can be threaded two ways: first-to-first measures from the beginning of the first thread on one end to the beginning of the first thread on the other end, while overall length measures from one physical end to the other. This is an important detail because it can change the stud's measured length by anywhere from 1/4 inch to 1/2 inch.

What stud material should I use for a high-temperature application around 1650 degrees F?

For high-temperature, high-pressure service such as an ANSI 600 Alloy 800 HT pipe class rated to 1650 degrees F, Inconel 625 is recommended for both the studs and nuts. Extreme Bolt also offers other high-performance specialty metals including Hastelloy, Incoloy, Waspaloy, and Nimonic for demanding heat applications.

What is the difference between a stud and a threaded rod?

A stud is a threaded rod that is less than 12 inches long, with no screw head and no inset driver like a set screw. Any length longer than 12 inches (1 foot) is considered a threaded rod.

What sizes are studs available in?

Studs are available in inch sizes from #2 up to 6 inches and metric sizes from M1.2 to M100. They are offered in both fine and coarse thread.

What materials can studs be made from?

What specifications and thread configurations are available for studs?

Studs are manufactured to ASME B18.31.2 and DIN 976 specifications. They can be supplied fully threaded, partially threaded (ends only), or with custom thread lengths.

Questions?

Our material experts are ready to help guide you through your specific application.