Skip to main content
Extreme Bolt & Fastener
Quote

Hose Clamps

Last updated

Made of specialty metals, polymers and ceramics

Worm drive hose clampMedium duty hose clampSpecialty Metal Hose Clamps- For Secure Connections in Corrosive Environments

Hose Clamp Types

Extreme Bolt & Fastener specializes in two types of specialty material hose clamps. Both are used to attach and seal a hose onto a fitting such as a barb or nipple, yet each has a different design offering distinct benefits for specific applications. Learn more about these two difference styles by clicking on the links below:

Worm drive hose clamp

Worm Drive Hose Clamps Provide Economic, Reusable Solution

The most commonly used style, worm drive hose clamps are distinguished by the slotted band which wraps the hose. This band features has screw pattern which is cut into the band to form this slotted pattern. At the end of the band there is a screw housing. To tighten, the loose end of the band is fed into a housing. When the screw is turned clockwise, it feeds slotted band through the threads of the screw like a gear, gripping each slot as it’s threaded through. This pulls the band tighter, locking it secure.

Available Materials

  • Grade 2 Titanium

Benefits

  • Economical and reusable.
  • Flexibility and serviceability as worm drive hose clamps can easily be installed and changed in the field with just a standard screwdriver
  • Ability to install and remove the clamp without disconnecting the hose
  • Large diameter range which is useful if tubing relaxes and needs more clamping force

Drawbacks

  • Screw pattern slats cut into the band lowers the overall strength and can bend with high tension and fatigue with reuse.
  • Not recommended for use with silicone (soft) hose or tube.
  • Has a flat spot below the screw mechanism that can result in uneven pressure around the fitting
  • Offer a firm, stiff fit which is beneficial but can lead to a loss in fit if there is a slight relaxation in the hose.
Medium duty hose clamp

Medium Duty Hose Clamps Ideal for High Pressure Applications

Unlike a worm drive where one side of the clamp band feeds though the fastener, held in place with a gear, here each side of the hose clamp is firmly secured directly to the other. Medium duty hose clamps feature a nut-and-bolt hose clamp with rolled band edges. This provides a more reliable, higher torque seal for both high and low pressure hose applications. The non-perforated, smooth band eliminates any risk of damage to the hose that can come with the slotted band of a worm drive. All sizes close to form a perfect circle, while the uniform 360º clamping ensures maximum sealing efficiency. Medium duty hose clamps are available in titanium grade 2 and Hastelloy C276.

Available Materials

  • Hastelloy C276
  • Grade 2 Titanium

Benefits

  • Constant pressure applied.
  • Even distribution of sealing pressure around the entire hose
  • Can be easily tightened or loosen with a wrench
  • Strength is based on the torque of the bolt and nut, rather than the strength of the slotted drive of a worm drive band
  • Ideal for high clamping force applications
  • Clamp can be opened and fastened in place without dislodging the hose

Drawbacks

  • Small range of clamping force. Typically made for a specific diameter
  • Screw and nut must be removed in order to open the hose clamp for attachment

Thread Options

Visit our thread options page for more information on Extreme Bolt's threading capabilities:

  • Thread types and attributes
  • Classes and tolerances
  • How threading can affect bolt performance
  • Specialty threads

Hose Clamps - frequently asked questions

What material hose clamp should I use for muriatic acid at 31% concentration?

For concentrated muriatic (hydrochloric) acid, Extreme Bolt offers hose clamps in two corrosion-resistant materials: Titanium and Hastelloy C276. Both are chosen for their resistance to aggressive chemical environments.

Which hose clamp is best when I need a reliable seal on toxic chemicals without damaging the hose?

A titanium hose clamp is well suited to toxic-chemical service. The medium duty style uses a non-perforated, smooth band with rolled edges that eliminates the hose damage risk of a slotted worm drive band while providing a reliable 360-degree seal.

What is the difference between worm drive and medium duty hose clamps?

A worm drive clamp uses a slotted band fed through a screw housing, making it economical, reusable, and adjustable over a large diameter range. A medium duty clamp uses a nut-and-bolt design with a smooth, non-perforated band for higher torque and even 360-degree sealing pressure, making it better for high-pressure applications.

What materials are Extreme Bolt hose clamps available in?

Worm drive hose clamps are available in Grade 2 Titanium. Medium duty hose clamps are available in Grade 2 Titanium and Hastelloy C276.

What sizes are titanium hose clamps available in?

Titanium hose clamps come in standard SAE sizes ranging from SAE #10 (approximately 5/8 to 15/16 inch) up to SAE #80 (approximately 4 to 5.5 inch), covering SAE numbers 10, 12, 16, 24, 32, 36, 44, 52, 64, and 80.

Are worm drive hose clamps suitable for silicone or soft hose?

No. Worm drive hose clamps are not recommended for use with silicone or other soft hose or tube, because the slotted band can create uneven pressure and damage a soft hose. A smooth-band medium duty clamp is a better choice in that case.

Questions?

Our material experts are ready to help guide you through your specific application.