Skip to main content
Extreme Bolt & Fastener
Quote

Technical Questions – FAQ’s

Last updated

463 posts · page 13 of 31

  • Flat Head Screws – What angles are standard?

    Q: I have a customer who is looking for some Inconel flat head screws and specifically called out 100°. Is this the standard? A: Flat head screws, also known as countersunk screws, are able to be manufactured with 6 different angles – 60°, 82°, 90°, 100°, 110° and 120°. The…

    Continue reading
  • Heat Treatment Options for 17-4PH Steel Bolts

    Q: I have a customer asking me for 17-4PH stainless, but says they need it heat treated to H1100. What does this mean?A: 17-4PH bolts are available in many different heat treatment options. This means that different heat treatments such as H1150, H1100, H1075, etc are applied to the material…

    Continue reading
  • Coating Duplex Bolts for Sea Water – Is this needed?

    Q: We would like to purchase Duplex parts. Can you xylan coat and Zinc nickel Electroplate them since they will be used in sea water? A: It is not practical to coat a Duplex 2507 boltas it is stainless steel and will not corrode in seawater. Duplex will provide great…

    Continue reading
  • Screw Creep at Elevated Temps – Inconel 600?

    Q: I am currently using 18-8 stainless steel socket head cap screws coated with MoS2 in a vacuum. I am having problems with the screws clamping force is sometimes loosening and they sometimes gall and jam, due to elevated temperature (700° to 1000° C) and heat cycling. What would be…

    Continue reading
  • Fastener Thread Class – 2A and 3A Threads, What’s the Difference?

    Q: My customer called out a 3a thread for their hex head screws. Is this different from a 2a thread pitch?A: Yes these are 3 different classes of fit for external inch series threads for studs, bolts, and screws 1A, 2A and 3A. 2A thread class is a medium fit,…

    Continue reading
  • Inconel 718 compared to A286 for High Temperature Strength

    Q: We are currently using A286 bolts per ASTM 453 at 1200F and are having some issues with durability as the tensile strength we originally calculated necessary was 130ksi but seems like we need higher strengths. Any ideas? A: In this type of environment you should consider A286 in the…

    Continue reading
  • PVDF Screws for Ultraviolet Radiation in Pharmaceutical Industry

    Q: I’m looking for a polymer fastener that can withstand ultraviolet radiation, but is also FDA approved as this is for a pharmaceutical application. Temperatures are around 100C. A: For this application, a good choice would be PVDF fasteners. PVDF screwsare both FDA approved and are ideal for handling ultraviolet…

    Continue reading
  • The difference between CL1 and CL2 in 316 B8M material.

    Q: I have a customer who needs 316 Stainless Steel B8M bolts. Would Class 1 or Class 2 have a higher strength? A: If a higher strength is needed you would want to use Class 2. B8M Class 2 is carbide solution treated and strain hardened whereas Class 1 is…

    Continue reading
  • Difference Between Hex Bolts & Hex Head Cap Screws

    Hex Cap Screws and Hex Bolts – Are they the same? While most think these parts are the same, they do have some slight differences. Hex head cap screws have a flat washer facing under the head that meet specific tolerances per ASME B18.2.1 whereas a Hex Bolt is flat…

    Continue reading
  • Inconel Flange for High Temperature Furnace

    Q: I was wondering if it would be okay to use the Tantalum material in a furnace with design temperature of 2600F. It is a heat treating furnace and I need a 4″ 150 ANSI RF flange. A: Generally due to its extremely high price, tantalum is produced as weld…

    Continue reading
  • UNJF vs UNF Threads – What is the difference?

    Q : I have a customer requesting a UNJF thread for his Aerospace application. How are these different from a UNF thread? A: This is a great question as UNJ threaded bolts are not interchangeable with a standard UN, UNC, or UNF nut. An internal UNJ thread will assemble to…

    Continue reading
  • Comparing the Titanium Grades 2, 5, 7 and 12

    Q: I’m working on a project that is using Titanium bolts for our equipment and we are considering a few different sizes and grade bolts; we are considering Gr.2, Gr.5, Gr.7 and Gr.12. What would you typically specify as the maximum tensile allowable (i.e. 2/3 yield) and the maximum shear…

    Continue reading
  • Studs: First to First Thread vs. Overall Length

    Q: My customer asked for a Hastelloy stud that is threaded first to first. Is this important? ** **A: This is a very important detail. There are 2 options for threads on studs . 1) First to First and 2) Overall Length (or physical end to other physical end). “First…

    Continue reading
  • Alloy 330 Bolts for Heat Treatment Racks & Age Furnace

    Q: Would you be able to quote fasteners, that will used to bolt together multi-piece heat treat racks cast from HX. The racks are used in both solution (water quench and polymer quench) and age furnaces. Our typical temperature range during heat treat cycles is 1300-1800°F but can be as…

    Continue reading
  • The difference between MIL-DTL-1222 and MIL-S-1222

    Q: I have a customer who requested a Hastelloy bolt per MIL-DTL-1222. Is this something you can produce? A: Yes we can produce to this spec but first you should know that MIL-S-1222 has been superseded by MIL-DTL-1222. A Hastelloy bolt per MIL-DTL-1222 will cover MIL-S-1222 but the reverse is…

    Continue reading

Questions?

Our material experts are ready to help guide you through your specific application.