Skip to main content
Extreme Bolt & Fastener
Quote

Technical Questions – FAQ’s

Last updated

463 posts · page 10 of 31

  • Inconel 718 per NACE Specs

    Q: What is the difference between Inconel 718 standard and NACE 718?A: NACE stands for the National Association of Corrosion Engineers. This group puts forth standards for corrosion resistant materials and when the NACE certification is asked for, the user is typically asking for NACE MR0175. Inconel 718 that meets…

    Continue reading
  • Certificates of Conformance (CoC) for Fasteners

    Q:What is included in a fastener certificate of conformance?A: A Certificate of Conformance for fasteners – often called a CoC – focus on the part dimensions, additional processing and compliance certificates. It confirms the dimensions of the part and states that these fasteners meet any of the customers requested industry…

    Continue reading
  • European Standards for Material Test Reports and Certificates of Conformance

    Q: My customer is asking for bolts with EN 10204 3.1 and 3.2. I have no idea what that means can you help me out?QA: EN 10204 3.1 and 3.2, as well as 2.1 all are European standards for quality certificates. The number 3.1 identifies that they require a materials…

    Continue reading
  • Material Test Reports (MTRs) for Fasteners

    Q: What is included in a Material Test Report for fasteners? A: Material Test Report for fasteners, also referred to as an MTR, is much more a detailed document than a Certificate of Conformance. Basically, it is a record confirming the material’s physical and chemical properties are per industry standards.…

    Continue reading
  • A286: An Economic Alternative to Inconel 718

    Q: I need a 12 point bolt for a vacuum application with low off-gassing, min yield of 120 ksi, low magnetic permeability and minimum operating temps of 400C / 750F. Is Inconel 718 a good choice? A: AnInconel 718 bolt will certainly work. The only other material you may want…

    Continue reading
  • What is the Different Between Tensile Strength & Shear Strength

    Q: I’m trying to figure out what material will work for my application based on the shear strength. I see you published tensile but not shear. Do you have the shear strength for A286 and Inconel 718? A: Unfortunately, there is no published standard value for shear strength like tensile…

    Continue reading
  • Rolled Threads vs Cut Threads

    Q: Can you explain to me what the difference is between cut and rolled threads?A: Cut threads can also be referred to as machined threads. The machining cuts away the material to create the thread form. Rolled threads means the threads are formed by pressing the parts between 2 round…

    Continue reading
  • Bolts for Boiling Sulfuric Acid

    Q: What fastener material is best for boiling sulfuric acid? A: Generally speaking, for 20-40% concentrations, Alloy 20 bolts will be the best bet for an economic solution. For all other concentrations in boiling H2SO4 you would have to use tantalumbolts, which can be costly. Though Hastelloybolts work in sulfuric…

    Continue reading
  • Bolts Resistant to Hot Saltwater

    Q: Can titanium handle hot saltwater conditions? A: Both grade 2 and grade 5 titanium boltscan be used in temperatures as high as 500°F (260°C). Remember as heat increases this can affect the strength of the material: Mechanical

    Continue reading
  • Forging, Broaching, EDM – Which is best?

    Q: I am looking to get some socket head cap screw made – what is the difference between forging, broaching, or EDM’ing the sockets?A. Broaching is a machining process that uses a toothed tool (broach) to remove material. Linear and Rotary are the main types of broaching. EDM (Electrical Discharge…

    Continue reading
  • Grade 7 Titanium offers Edge on Corrosion

    Q: When do you use Titanium Grade 7 Bolts? A: Titanium grade 7is similar in strength to grade 2 bolts but the material is alloyed with added palladium. This addition gives Titanium grade 7 bolts improved corrosion resistance in mineral acids and strong brines. This is ideal in salt water…

    Continue reading
  • High Strength Monel K500 Compared to Titanium Grade 5

    Q: How does Monel K500 Compared to Titanium Grade 5? A: Both Monel boltsand titanium boltsoffer excellent resistance to saltwater conditions. Titanium has just a slight edge on corrosion resistance to stagnant seawater compared to Monel – but this is minuscule. The main differences are strength and applications. In terms…

    Continue reading
  • Inconel vs Hastelloy for High Strength Corrosion

    Q: Can Hastelloy bolts provide high strength? A: Hastelloy C276 bolts can provide about 107ksi of strength. They are typically used for high temperature corrosionresistance. For corrosiveapplications where higher strength is needed, you may also want to consider Inconel 625. Inconel 625 boltsoffer 144ksi of strength and are also very…

    Continue reading
  • 17-4 H900 Heat Treatment Failure

    Q: We have a drawing for a 17-4 1″ bolt that we would like to order which can be heat treated to H900 – H1050. Are there any heat treat conditions that we should avoid? I’ve heard H900 can lead to sudden failure? Is this true? A: With the 17-4PH…

    Continue reading
  • 316 for High Temperatures

    Q: I don’t see 316 on your sight but would you know if 316H material can be useed at 1500F? A: I believe 316H will survive 1500F without significant oxidation. However, please be aware, at that temperature, the material will lose a significant % of its strength. The material already…

    Continue reading

Questions?

Our material experts are ready to help guide you through your specific application.