Flat Head Screws
Last updated
Made of specialty metals, polymers and ceramics


Flat head screws are characterized by having a flat (or countersunk) head that can align flush or below the surrounding surface.
Driver Availability
(dependant on size/material)
- Socket
- Slotted
- Phillips
Flat Head Screw Specifications
- ASME B18.3, ASME B18.3.6
- DIN 963 / ISO 2009
- DIN 965 / ISO 7046
- DIN 7991 / ISO 10642
Flat Head Screw Sizes
- #00 - 4"
- M1.2 - M100
PEEK Slotted vs. Phillips Driver
| Slotted Head Advantages | Phillips Head Advantages |
|
|
Countersink Angle
For most flat head screw designs the angle of countersink is usually 82° for UNC and UNF applications however other angles ranging from 60° -120° could be specified. For metric flat head screws, the standard angle is 90°.
| Thread Type | Standard Flat Head Countersink Angle |
| UNC / UNF | 82° |
| Aerospace | 100° |
| ISO Metric / Imperial | 90° |
Engineering verification pending.
Thread Options
Visit our thread options page for more information on Extreme Bolt's threading capabilities:
- Thread types and attributes
- Classes and tolerances
- How threading can affect bolt performance
- Specialty threads
Flat Head Screws - frequently asked questions
What is the standard countersink angle for inch flat head screws?
For most flat head screw designs the standard countersink angle is 82 degrees for UNC and UNF (inch) applications. Other angles ranging from 60 to 120 degrees can be specified.
Is 100 degrees the standard angle for Inconel flat head screws?
No, 100 degrees is not the general standard; it is the angle typically called out for aerospace applications. Standard inch (UNC/UNF) flat head screws use an 82 degree countersink, while 100 degrees can be specified when required.
What countersink angle do metric flat head screws use?
ISO metric and imperial flat head screws typically use a 90 degree countersink angle, versus 82 degrees for UNC/UNF inch threads and 100 degrees for aerospace.
What sizes are flat head screws available in?
Flat head screws are available in inch sizes from #00 to 4 inches and metric sizes from M1.2 to M100.
Which materials can flat head screws be made from?
Should I choose a slotted or Phillips drive for PEEK flat head screws?
Slotted heads tend to strip less in harsh or dirty environments and wear less when repeatedly removed and reinstalled. Phillips heads offer a stronger joint because they tolerate more torque. Driver availability (Socket, Slotted, Phillips) depends on size and material.

