Skip to main content
Extreme Bolt & Fastener
Quote

A4-100 Stainless Fasteners - Bolts, Screws & Nuts

Last updated

High tensile strength A4-100 stainless steel

Need help choosing a material?

Pexel Free SpaceXSatellite3

Austenitic stainless steel A4-100, is a high strength cold worked version of 316 stainless steel. While the chemistry of A4-100 fasteners is similar or equivalent to other A4 fasteners like A4-70, A4-80, ASTM F593 Group 2 and ASTM A193 B8 Grades, it’s primarly difference is its high strength generated from cold-working. A4-100 bolts are cold-worked to the highest levels attainable in 316 stainless steel to achieve maximum strength without sacrificing ductility. This results in 1000MPa / 145 KSI minimum ultimate tensile strength and a minimum yield strength of 800 MPa / 116 KSI. These strengths significantly outperform the strengths of other 316 fastener grades such as ASTM A193 B8 Class 1 and 2, ASTM F593 Group 2 (CW1, CW2, SH1, SH2), A4-70, and A4-80 fasteners. Click here for material strength comparison chart.


A4-100 stainless steel fasteners are an economical alternative to heat-treated superalloys, like A286 (ASTM A453 Grade 660) and 17-4PH stainless steel (ASTM A564 Grade 630) for high strength applications that do not require extremely high temperature resistance. Additionally, A4-100 fasteners are a great alternative to high strength alloy steels, which typically corrode in moist air.



 


A4-100 Stainless Steel Chemistry and Specifications

A4-100 SPECIFICATIONS: ISO 3501-6, UNS S31600

A4 Stainless Steel — table
A4 Stainless
Steel
CrNiCuMoMnSiCPS
%16.0 – 18.510.0 – 15.04.002.0 – 3.02.01.00.080.0450.030
*For austenitic stainless steels having a maximum carbon content of 0,030 %, nitrogen may be present but shall not exceed 0,22 %
* At the discretion of the manufacturer the carbon content may be higher as necessary in order to obtain the specified mechanical properties for larger diameters, but shall not exceed 0,12 % for austenitic steels.


A4-100 Stainless Steel High Strength Comparison Chart

Property class — table
Property
class
Tensile
strength
(ksi)
Yield Strength
(ksi)
at 0.2% Offset
A286 (aged) Cold Worked160120
A4-100145116
17-4PH (H1150)135105
A286 (aged) ASTM A45313085
F593 Group 2, SH112095
A4-8011687
F593 Group 2, CW110065
ASTM A193 B8 Class 2125100
A4-7010165
ASTM A193 B8 Class 17530
A4-507230

A4-100 fastener styles

A4-100 Stainless - Frequently Asked Questions

Answers from our engineers, drawn from the A4-100 technical questions we're asked most.

I have difficulties getting A4-70 A4-80 and A4-100 screws in small sizes (M4, M5 and M6). Can you suggest suitable material alternatives?

A4 (A4 (1.4401 / 1.4404) is an excellent material for high strength bolts. A4-70 and higher strength screws in small sizes (up to M8) are not standard products. The reason is that A4 (AISI 316) stainless steel is a austenitic material. Therefore, the only way gain high

strength fasteners (with a tensile strength of 700 MPA (A4-70), 800 Mpa (A4-80) or higher is by hardening of the material. The hardening for larger sizes (M10 and up) is obtained during the cold heading of the screws. For smaller screws however, only a tensile strength in the range of 500 MPA (equal to A4-50) or strength class 5.x is typically obtained during production.

It is possible to manufacture A4-70, A4-80 or A4-100 in small sizes by machining those from full hard material (i.e machining a hardened bar) . This is a difficult process as the pre-hardened material can be fairly brittle – which can make small A4 bolts in these sizes quite expensive.

The alternative may be to go for Duplex screws. Machined Duplex screws will have a tensile strength of min (113 ksi / 780 MPA) if machined and can replace A4-70. For higher strength requirements, you should consider titanium grade 5 screws which have a tensile strength of Min 138 ksi / 950 MPA corresponding to A4-80 or A4-90. Replacement of A4-100 is best done by a precipitation hardened material like 17-4PH or Inconel 718 bolts.

The corrosion resistance of Duplex stainless steel, titanium grade 5 and Inconel 718 are

all better than A4. The A4 has PREN numbers in the range 23-28, whereas Duplex is above 30. The 17-4PH material contains slight lower amount of chromium compared to A4 so the pitting resistance may also be lower.

What our customers say

More customer feedback
“I purchased from you specifically because of Jon’s expertise and professionalism.”
“Very impressed; good prices and delivered earlier than lead time given, which was a real bonus.”
“Extreme Bolt is definitely on my go-to list.”

Questions?

Our material experts are ready to help guide you through your specific application.