Skip to main content
Extreme Bolt & Fastener
Quote

Vented Screws

Last updated

Made of specialty metals, polymers and ceramics

Vented ScrewsVented screws are ideal for use in high vacuum (UV) and ultra high vacuum (UHV) equipment, as well as other high pressure environments and applications where gas pockets can form. Center vented screws have a center bore drilled through their axis from the head through the threaded shank of the screw. This feature provides an outlet for the complete evacuation of trapped air and gas contaminants to be pumped away from blind-tapped screw holes, bottoms, sides and shoulders. In addition to vented screws, washers with vent grooves can be made to ensure the venting of the cavity found under the screw head.

Vented Screw Sizes

  • #4 - 4"
  • M3 - M100

Availability

Both fine and coarse threads available

Vented Screws Benefits

  • Enables faster, more efficient pump-down of HV & UHV systems
  • Eliminates virtual leaks
  • Relieves pressure from blocked gases
  • Provides means to vent contaminants found in screw voids
  • Promotes higher system throughput and improved yield
  • Allows for constant pressure and temperature equalization
Vented Screw TextCrop
vented washer

What is a vented washer?

When a screw is tightened over a flat washer, or directly an application without a washer, volumes of gas can be trapped in the space and beneath the fastener head along the screw shaft. Vented washers feature two bored canals on opposite sides of the flat face which provide an escape route for trapped gases.

What is a virtual leak?

A virtual leak is comprised of gases that are trapped physically within a pocket with only a miniscule escape path from the trapped pocket of gas into the chamber proper.

Thread Options

Visit our thread options page for more information on Extreme Bolt's threading capabilities:

  • Thread types and attributes
  • Classes and tolerances
  • How threading can affect bolt performance
  • Specialty threads

Vented Screws - frequently asked questions

Can a vented screw help pump down my vacuum system faster?

Yes. Vented (center-drilled) screws have a bore through the axis from the head through the threaded shank that lets trapped air and gas evacuate from blind-tapped holes, enabling faster, more efficient pump-down of high vacuum (HV) and ultra-high vacuum (UHV) systems and eliminating virtual leaks.

Can I specify the diameter of the drill hole in a vented screw?

Yes, the diameter of the vent bore can be specified to control the amount of atmosphere that is vented, which is useful when you need to limit how much gas escapes while still venting contaminants.

What sizes are vented screws available in?

Vented screws are available in inch sizes from #4 through 4" and metric sizes from M3 through M100, in both fine and coarse threads.

Which materials can vented screws be made from?

Vented screws are available in specialty alloys including 17-4PH, 254 SMO, 310SS, A4-100, A286, Alloy 230, Alloy 330, Alloy 926, Aluminum 7075, Duplex Steel, Hastelloy, Incoloy, Inconel, Nickel 200, Nimonic, Nitronic, Silicon Bronze and Titanium, with other materials available upon request.

What is a virtual leak and how do vented screws prevent it?

A virtual leak is gas trapped physically within a pocket with only a minuscule escape path into the chamber. Vented screws provide an outlet for trapped air and gas contaminants to be pumped away from blind-tapped holes, bottoms, sides and shoulders, eliminating these virtual leaks.

What is a vented washer and when would I use one?

A vented washer has two bored canals on opposite sides of its flat face that provide an escape route for gas trapped in the space beneath the fastener head. They can be used alongside vented screws to ensure venting of the cavity found under the screw head.

Questions?

Our material experts are ready to help guide you through your specific application.