Nimonic Fasteners - Bolts, Screws & Nuts
Last updated
Excellent high temperature creep resistance to 1500°F
Need help choosing a material?
Good high temperature corrosion and oxidation resistance
- Excellent for high strength & high pressure applications
- Nimonic 75 and Nimonic 80A chemistry & specifications
- Rupture strength and mechanical strength charts
- Nimonic datasheet
Nimonic fasteners are best known for their high temperature, low-creep attributes. They are comprised primarily of nickel and chromium – typically more than 50% nickel and 20% chromium – along with other additive such as titanium and aluminum. Due to their ability to withstand extreme temperatures and pressure, they are often used in aircraft parts and gas turbine exhaust applications as well as high temperature furnace applications. Nimonic fasteners are available in two different alloy grades with slightly different capabilities.
Nimonic 75
Nimonic 75 fasteners have good mechanical properties and oxidation resistance at high temperatures to 1200°F (650°C). Comparable to Inconel 600, Nimonic 75 bolts are primarily used when oxidation and scaling resistance are required in high temperature conditions.
| Properties | Metric | Imperial |
|---|---|---|
| Tensile Strength (annealed) | 750 Mpa | 109 ksi |
| Yield Strength (annealed) | 275 Mpa | 39 ksi |
| Elongation at Break | 42% | 42% |
Nimonic 80A
Nimonic 80A fasteners are similar in composition to Nimoic 75 but are age hardened to offer much higher strengths. Nimonic 80A bolts offer a good combination of corrosion and oxidation resistance, while maintaining high levels for strength to temperatures as high as 1500°F (815°C).
| Properties | Metric | Imperial |
|---|---|---|
| Tensile Strength (age hardened) | 1250 Mpa | 181 ksi |
| Yield Strength (age hardened) | 780 Mpa | 113 ksi |
| Elongation at Break | 30% | 30% |
Nimonic Chemistry & Specifications
Nimonic 75 Specifications: UNS N06075, Werkstoff 2.4951 &. 2.4630, DIN NiCr20Ti
| Nimonic 75 | Ni | Cr | Fe | Si | Mn | Ti | Cu | C |
|---|---|---|---|---|---|---|---|---|
| Min % | - | 18.0 | - | - | - | 0.2 | - | 0.08 |
| Max % | Bal | 21.0 | 5.0 | 1.0 | 1.0 | 0.6 | 0.5 | 0.15 |
Nimonic 80A Specifications: UNS N07080, Werkstoff 2.4952 & 2.4631
| Nimonic 80A | Ni | Cr | Fe | Ti | Co | Al | Mn | Si | Cu | Zr | C | S | B | Pb |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Min % | - | 18.0 | - | 1.8 | - | 1.0 | - | - | - | - | - | - | - | - |
| Max % | Bal | 21.0 | 3.0 | 2.7 | 2.0 | 1.8 | 1.0 | 1.0 | 0.2 | 0.15 | 0.10 | 0.015 | 0.008 | 0.0025 |
| Rupture Strength (1000 h) | ksi | MPa |
|---|---|---|
| 1400°F / 760°C | 6.0 | 40 |
| 1500°F / 815°C | 3.5 | 24 |
| 1600°F / 870°C | 2.2 | 15 |
| 1700°F / 925°C | 1.5 | 10 |
| 1800°F / 980°C | 1.2 | 8 |
Nimonic 80A Precipitation Hardened Rupture Strength
| Rupture Strength (1000 h) | ksi | MPa |
|---|---|---|
| 1400˚F / 760˚C | 6.0 | 40 |
| 1500˚F / 815˚C | 3.5 | 24 |
| 1600˚F / 870˚C | 2.2 | 15 |
| 1700˚F / 925˚C | 1.5 | 10 |
| 1800˚F / 980˚C | 1.2 | 8 |

Nimonic fastener styles
Nimonic Screws
Nimonic Bolts
Nimonic Studs & Threaded Rods
Nimonic Washers
Nimonic - Frequently Asked Questions
Answers from our engineers, drawn from the Nimonic technical questions we're asked most.
I have a high temperature exhaust stream that needs an oxidation resistant fastener? Any suggestions, my temperature is about 1400F?
For this temperature you have a few options depending on the strength you need. One option may be Nimonic 80A bolts which are usable to about 1500F. Also Nitronic 60 fasteners offer good wear and oxidation resistance to about 1800F. Finally there are 310 stainless steel fasteners. 310 stainless bolts are usable to about 2000F and offer excellent oxidation and carburization resistance. In terms of strength they offer a wide range with 310 stainless at 70ksi of ultimate tensile strength, Nitronic 60 at 90ksi and Nimonic 80A being the strongest at 181ksi.
I have an application with high temperature exhaust that requires a high strength bolt for oxidation resistance. Temps are pretty consistent around 1300F. Would Inconel 718 bolts be a good choice?
Inconel 718 would definitely be one good option. Inconel 718 bolts offer 210ksi tensile strength and are used up to about 1300F. If you can accept a bit lower strength another material to consider would be Nimonic. Nimonic 80A fasteners offer a strength of 181ksi tensile and has a max usable temperature of 1500F with excellent oxidation resistance. Finally another very strong alloy for high temperature oxidation resistance is A286. A286 bolts will get you a typical tensile strength of 130ksi (cold worked a min of 160ksi) and does well in high temperature environments.
What our customers say
More customer feedback“I purchased from you specifically because of Jon’s expertise and professionalism.”
“Very impressed; good prices and delivered earlier than lead time given, which was a real bonus.”
“Extreme Bolt is definitely on my go-to list.”




















