Skip to main content
Extreme Bolt & Fastener
Quote

Technical Questions – FAQ’s

Last updated

463 posts · page 26 of 31

  • Inconel 625 vs Hastelloy C276 in Hydrochloric Acid (HCl)

    Q: We are altering the chemicals we use to regulate the pH level of our manufacturing process with hydrochloric acid. I’m using some Inconel 625 bolting – will this work in the HCl too? A: Inconel 625 bolts offer a high level of corrosion resistance for many acids, may work…

    Continue reading
  • Torlon Polymer Fasteners for High Temperatures Above 500°F

    Q: I have an application where I need a non-metal fastener because of insulation and magnetic issues. The problem is that it also needs to be able to retain strength at about 520°F. Should I use a ceramic? A: Ceramic fasteners are definitely not necessary at these temperatures, although they…

    Continue reading
  • Monel 400 Bolts in Seawater / Stress Corrosion Cracking

    Q: I have some machinery exposed to salt water as well has drastic temperature swings. I’m concerned about corrosion but also a material that will become brittle. A: Monel 400 bolts are an excellent material for salt water corrosion protection and is a go-to material for many marine applications. As…

    Continue reading
  • High Temperature A286 Fasteners vs Molybdenum fasteners

    Q: I need some high temperature engine components that can provide high strength (100ksi yield) to 1000F as well as oxidation resistance? Are molybdenum bolts good for that? A: Though Molybdenum is excellent in high temperature environments its generally reserved for very high temperature vacuum application where no oxygen is…

    Continue reading
  • Titanium vs Monel bolts in stagnant salt water

    Q: I’m dealing with a stagnant seawater situation. I’ve tried Monel 400 bolts because of its salt water resistance but am experiencing mild pitting corrosion. Any material that would fair better? A: Monel 400‘s only Achilles heel in terms of salt water situations usually occurs in stagnant waters where is…

    Continue reading
  • Monel Fastners for HF Contaminated Industrial Water

    Q: I have a process where I’m experiencing corrosion from my industrial water system. I’ve tried Hastelloy C276 bolts but they are corroding much faster than I would expect. The water only has low levels of Hydrofluoric Acid (HF). Any ideas would be great. A: Hydrofluoric acid is an unusual…

    Continue reading
  • Titanium vs Super Duplex Bolts in Chlor-Alkali

    Q: I’m running a chlor-alkali process and have been using Duplex 2507 bolts. I choose them for their yield strength and corrosion resistance but am still having issues with the chlorine. Ideas? A: Many chlor alkali processes use Titanium fasteners for its combination of high strength and chlorine resistance. Grade…

    Continue reading
  • High Temperature Bolting: Incoloy 800 & Inconel 600

    Q: I’m running a high temperature ethylene process that will reach 750-850C. I need a fastener that is carburization and creep resistance. Also moderate corrosion can be an issue. Any suggestions on materials? A: This process is ideal for Incoloy 800H or 800HT bolting. These materials are designed for long-term…

    Continue reading
  • Lightweight & High Strength PEEK Screws

    Q: I need a fastener that is very low weight and offers good wear resistance for a robotics application. I need about 40 ksi in strength. A: For your application I would actually suggest an engineered polymer fasteners since your strength requirement isn’t high enough to necessitate a metal .…

    Continue reading
  • Incoloy Bolts for High Temperatures

    Q: I have a need for a high temperature bolts that will be used in continuous heat at about 1000F. Any suggestions? Also, will fluctuations in temperature cause breakage? A: One of the best materials for long-term continual exposure to high temperatures are Incoloy bolts. The Incoloy 800 series will…

    Continue reading
  • High Strength Fasteners for Hydrochloric Acid (HCl)

    Q: I’m in need of a high strength fastener that can withstand moderate concentrations of hydrochloric acid ( HCl) 25%? Can I use Hastelloy Bolts ? I need a bolt that can handle a yield of about 100ksi and temperatures around 100F. A: Hastelloy bolts are definitely ideal in this…

    Continue reading
  • Titanium Grade 5 Screws for High Strength, Non-Magnetic Application

    Q: I work in the fusion technology field, specifically in a plasma physics laboratory. We are currently using a large number of A286 screws. The screws have to withstand the high pre-loads required to insure the ultra high vacuum tightness of our facilities (generating stresses in the screws of up…

    Continue reading
  • PEEK vs Ceramic Fasteners for Strength & Electrical Resistance

    Q: I am looking for some high tensile strength studs with good electricity resistance. I think zirconia of aluminia material will be suitable but I am open for suggestions. The studs would be about 5 inches long.A: Probably ceramics fasteners are not the best choice for this situation. It is…

    Continue reading
  • 17-4PH Bolts for Strength & Ductility

    Q: Hello, I currently have an application that requires high strength set screws. One of our machines uses air cylinders with threaded shaft ends made of alloy steel set screws. The set screws are actually shearing off in our application, causing damage to the cylinders and equipment. I am looking…

    Continue reading
  • Alloy 20 Bolts for Sulfuric Acid (H2SO4)

    Q:I’m running a cotton mercerizing process that is being altered to utilize sulfuric acid. I didn’t realize how corrosive using sulfuric acid (H2So4) is on my fasteners. Any ideas on how to protect my bolts. Not super hot, just corrosive.A:Alloy 20 bolts are a good choice for this. It was…

    Continue reading

Questions?

Our material experts are ready to help guide you through your specific application.