Skip to main content
Extreme Bolt & Fastener
Quote

Technical Questions – FAQ’s

Last updated

463 posts · page 20 of 31

  • Zirconia Fasteners for Non-Reactive 2000C Application

    Q: I am looking for recommendations for fasteners capable of operating under load at 2000C, in a mild vacuum environment. The material can be conductive or insulating just along as it does not react with carbon. A: For temperatures as high as 2000C, Zirconia ceramic fastenerswould be your only option.…

    Continue reading
  • Difference Between Grades of Nitronic Fasteners

    Q: What is the difference between Nitronic 50 and 60? A: Both grades of Nitronic offer similar strength which is nearly double the yield strength of 300 series stainless steel (Nitronic 50 100ksi UTS and Nitronic 60 95ksi UTS). The real difference is in the temperature capabilities and the usage…

    Continue reading
  • Understanding the Different Grades of Tungsten Fasteners

    Q: What is the difference between the different grades of tungsten and why would I choice one vs the other?A:Tungsten fasteners are available in commercially pure tungsten (Tungsten CP) which is 99.95% pure. This grade offers the highest density, strength and hardness of all the grades. It is also the…

    Continue reading
  • Tungsten Screws for Radiopaque Applications

    Q: I’m looking for a material that is radiopaque. Do you have any suggestions?A: Two materials come to mind. First is tantalum. It is often used in medical applications for its radiopacity. Tantalum fasteners are also bio-compatible and extremely corrosion resistant. The second material is tungsten. Tungsten fasteners come in…

    Continue reading
  • Inconel 625 Bolts For High Temperature Corrosion

    Q: Is there a material you can recommend that can handle a high temperature exhaust stream which has trace corrosive chemicals? I’ve tried A286 bolting but am having some corrosion issues. A: When a process demands high temperature corrosion resistance, depending on the temperature and amount of contamination, you might…

    Continue reading
  • Bolts for High Temperature Exhaust Stream

    Q: I have an application with high temperature exhaust that requires a high strength bolt for oxidation resistance. Temps are pretty consistent around 1300F. Would Inconel 718 bolts be a good choice? A: Inconel 718 would definitely be one good option. Inconel 718 bolts offer 210ksi tensile strength and are…

    Continue reading
  • Hastelloy Bolts For 37% HCl at Room Temperature

    Q: I am needing to replace some hex heads and nuts on an HCL tank lid. It appears they were originally coated and due to a previous leak, they are starting to corrode. What would be the best alternative bolt type for this situation? HCL concentration is 37% and is…

    Continue reading
  • Inconel, Monel & Titanium bolts for strength and high temps

    Q: I’m in need a high strength bolt that can not only withstand temperatures of 1000F but also be exposed to chemical contaminants from time to time. The 1000F is the max, probably not the constant. Strength would need to be around 150ksi. Contaminants would be salts and some low…

    Continue reading
  • Duplex Bolts for Oil & Gas Brine

    Q: I have the need for a bolt that can withstand high temp brine byproduct from an oil & gas installation. Any suggestions?A: Depending on what temperatures you are dealing with Duplex Steel bolts may be a good fit. Duplex bolts provide good localized resistance to brines and chlorides. Super…

    Continue reading
  • PEEK Screws for Low Dielectric Constant & Strength

    Q: We are looking for a non-conductive screw with lower dielectric constant / dissipation factor to replace a steel screw (Tensile Strength 70kpsi) in one of our products. So were trying to get to similar strength / properties to the steel screw to meet our torque requirements. Will a ceramic…

    Continue reading
  • Tungsten Set Screw for Density & Strength

    Q: I’m looking for a high density material that is also high strength. I need set screws for a weighted part, but they also need to have about 120ksi of tensile strength. Is this possible? A: Yes, for this type of application you’ll want to use pure tungsten or a…

    Continue reading
  • Inconel 625 Bolt for High Temperature Chemical Processing

    Q: I need a bolt that can handle a chemical processing situation where there are not only corrosive chemicals but also high temperatures that can fluctuate. Max temp is around 1200F. What would you suggest? A: Not knowing the chemicals you are using makes it tough, but for high temperature…

    Continue reading
  • PTFE and Monel Fasteners for Hydrofluoric Acid

    Q: I need a material that is resistant to a small concentration of hydrofluoric acid at room temperature? Can you offer any suggestions?A: Two materials come to mind. First in terms of metal alloys Monel 400 bolts are resistant to most concentrations of hydrofluoric acid. If you prefer a polymer,…

    Continue reading
  • Hastelloy vs. Zirconium for HCl with Contaminants

    Q: I have a process that utilizes about 10% hydrochloric acid with trace amounts of other chemicals. I tried zirconium bolts because they are known for HCl but we’re burning through them like crazy and I can’t figure out why they are corroding. Any ideas and what other material may…

    Continue reading
  • 17-4PH Bolts for High Strength

    Q: I have equipment that requires a high strength bolt. Temperature and corrosion are not an issue, solely strength. I had tried Super Duplex thinking that would do the trick, but I’m still having breakage. Any ideas? A: For an application that exclusively requires high strength, you might want to…

    Continue reading

Questions?

Our material experts are ready to help guide you through your specific application.