Skip to main content
Extreme Bolt & Fastener
Quote

Technical Questions – FAQ’s

Last updated

463 posts · page 21 of 31

  • Titanium & Monel K500 for High Strength Saltwater Corrosion

    Q: I’ve been using Monel 400 for a saltwater application but I’m having issues with bolts notwithstanding the application pressure. Is there a saltwater resistant fastener that can give me higher strength?A: Yes for higher strength saltwater resistance you have two options. Monel K500 bolts are an age hardened sister…

    Continue reading
  • Alloy 330 for Cyclic High Temperatures

    Q: I’m running a process that has a huge swing in temperature fluctuations due to downtime and maintenance. The max temperature is around 1500F. Can you suggest a material that can handle this? A: For processes that are faced with the dual dilemma of both high temperature and cyclic conditions,…

    Continue reading
  • Duplex Bolts for DI Water Corrosion & Strength

    Q: We need a custom bolt for securing a 304SS flange to a pressure vessel located in a submerged DI water pit. We have a few concerns/requirements. First, we need to ensure that galling and corrosion do not prevent us from removing the bolts during service events (between 1 and…

    Continue reading
  • PTFE and PVDF for High Purity Corrosive Application

    Q: We are having some issues with corrosion in a highly sensitive pharma application. I need a bolt that is corrosion resistant to both acids and organics, but is usable in a high purity situation. Temperatures can reach about 120F. Also, it would need to be a polymer screw available…

    Continue reading
  • Inconel 625 Studs for 29 ksi Yield at 700F

    Q: I am looking to eventually get a quote for some 3/8″ studs and nuts. I need to have a min yield stress of 29 ksi at 700F. SA-540 Grade B22 Class 2 or SB-637 should work. Is this something you can provide? A: These are very different materials: A-540…

    Continue reading
  • Hastelloy Bolts for Acid Contaminated Chloride

    Q: I have an application that is exposed to mainly chloride but has some other acid contamination. Can I still use titanium to protect for corrosion. A: Though titanium fasteners are highly resistant to chloride – almost immune – they typically do not work well with many other mixed acid…

    Continue reading
  • Strength Ceramic Screws Compared to Steel

    Q: How do ceramic alumina screws compare to steel screws as far as strength goes? The load would most likely be tension, but some compression too. A: If you compare 316 Stainless Steel to Zirconia ceramic screws, their tensile strengths are similar (around 75 ksi tensile) with Alumina ceramics being…

    Continue reading
  • Inconel 625 for 900C High Temperature Application

    Q: I have an application, which will be heated by radiant heat from below to 700°C to 900°C. The problem I am trying to solve is that the screws tend to fuse to the plate they are fastening. Black Oxide alloy steel is the best we’ve tried, but still very…

    Continue reading
  • Tantalum Screws for Hydrochloric Acid Resistance

    Q: We currently use Titanium screws, and I would like to know pricing and lead time to replace them with Tantalum screws to improve their resistance to HCL.A: What concentration and temp are you at with the HCl? See the HCl Iso-Corrosion curve for Hastelloy C276. Tantalum screws will definitely…

    Continue reading
  • Vespel Screws for High Temperature

    A. We need a screw that is usable at 200C in air only, so no chemical resistance needed. I like the high strength of the Carbon Fiber PEKK or PEEK Extreme. Will these work?A Q: Would recommend using either Glass filled PEEKor Vespel. Vespel screws are made from the highest…

    Continue reading
  • Monel Bolts for Saltwater Wharf

    Q: We are installing bolts into a refinery wharf. After doing a test run on a few A316 stainless steel bolts, they came back heavily corroded. Do you have an coating that can be used for salt water applications that would prevent this? Or do can you advise on another…

    Continue reading
  • Hastelloy Spanner Screw for Security

    Q: I’m looking for a unique type of screw called a snake eye screw. I noticed that you work with specialty alloys and I’m looking for this part made of hastelloy – is this possible? A: A snake eye screw is another name for a spanner security screw. Depending on…

    Continue reading
  • Vented Screws to Dispel Contaminents

    Q: I have an application where I need contaminants to vent. I want to limit the amount of atmosphere that is vented – can I specify the diameter of the drill hole in a vented screw?A: Yes, depending on the diameter we can produce vented screws that are per your…

    Continue reading
  • Hastelloy Tamper Proof Screws for Sulfuric Acid Protection

    Q: I have a hazardous application that involves sulfuric acid. We need to prevent anyone from tampering with this application. Can you help me out with a solution? A: Yes. First regarding the sulfuric acid, you’ll need a bolt that can resist this type of environment. Depending on the concentration…

    Continue reading
  • Vented Screws Provide Solution to Outgasing

    Q: I heard their is a type of bolt with a hollow core that I can use to enable a faster pump-down on my vacuum system. Is this something you are familiar with or can offer?A: Yes this type of bolt is referred to as a vented screw. It has…

    Continue reading

Questions?

Our material experts are ready to help guide you through your specific application.