Skip to main content
Extreme Bolt & Fastener
Quote

A286 Fasteners - Bolts, Screws & Nuts

Last updated

A286 / Alloy 660 for excellent high temperature oxidation resistance

Need help choosing a material?

A286 Pixabay hot jet engine

A286 (1.4980) fasteners, also known as Alloy 660 fasteners are stainless steel alloy which contains iron, nickel and chromium. A286 fasteners are known for their high strength, creep resistance and oxidation resistance at elevated temperatures once age hardened.  As a result, A286 fasteners provide high levels of strength from room temperature up to about 1300°F (700°C).

A286 fasteners are also mildly corrosion resistant. While they should not be used for strong acid environments, they provide excellent oxidation resistance up to 1500°F (815°C) in conditions that would typically be found in high temperature exhaust streams. Because A286 fasteners are used in high temperature applications where performance is critical, we can provide fasteners to ASTM A453 Grade 660 in order to ensure accurate standards for tensile and stress rupture properties.

A286 - HIGH TEMP USAGE
PropertyContinuous
Operation
Short Term /
Intermittent Use
High Strength Retention-320°F up to 1000°F1300-1500°F
Oxidation Resistance1500°F1800°F

Cryogenic Capabilities

A286 is not only usable for high temperatures, it can also be used for subzero applications. Since it remains ductile at cryogenic temperatures, it can be a good choice for non-magnetic strength down to around -320°F. Click here to view a chart on the mechanical properties of A286 bolts at cryogenic temperatures

Applications

Because of the properties of Alloy 660 / A286, these bolts are often found in high temperature engine, manifold, exhaust and turbine applications as well as off-shore oil & gas applications. In addition, A286 / Alloy 660 is also non-magnetic and finds a niche in non-magnetic cryogenic equipment. Extreme Bolt & Fastener also provides A286 to ASTM A453 Grade 660 specification. This specification ensures accurate standards for tensile and stress rupture properties, which is critical for many high temperature applications.


Specifications for A286 Fasteners

UNS S66286, ASTM A453, AMS 5525, AMS 5726, AMS 5732, AMS 5737, AMS 5804, EN 1.4980, Werkstoff 1.4980, ASTM F2281

ASTM A453 Grade 660

Material specification ASTM A453 Grade 660 applies to bolts, studs, nuts and other fasteners. It ensures fasteners meet strength standards for use in high temperature bolting applications. ASTM A453 Grade 660 is classified into 4 property classes / heat treatments: A, B, C & D, each designated with different tensile and stress rupture properties. The most common of the ASTM 453 classes are class A or D. The grades A, B and C all have the same minimum tensile strength and minimum yield strength of 130ksi and 85ksi respectively. However grade D has a significantly better yield with a min tensile of 130ksi and a min yield of 105ksi.

AMS 5737

One of the most common AMS specs used for A286 bolts / Alloy 660 bolts is AMS 5737. This AMS grade offers similar chemistry and mechanical properties to ASTM A453 660 Grade A. AMS 5737 bolts are solution treated and age hardened.

Alloy — table
AlloyYield Strength
at 0.2% Offset
(min)
Tensile
Strength
(min)
Elongation
(min)
Alloy A286 Solution Treated and Aged (AMS 5737)95 ksi ( 655mpa)140 ksi (965 mpa)0.12

AMS 5732

Another common AMS spec for A286 bolts is AMS 5732. AMS 5732 bolts are solution treated and age harded to have similar chemistry and mechanical properties to ASTM A453 660 Grade B. 

Alloy — table
AlloyYield Strength
at 0.2% Offset
(min)
Tensile
Strength
(min)
Elongation
(min)
Alloy A286 Solution Treated and Aged (AMS 5732)85 ksi (586 mpa)130 ksi (896 mpa)15%

AMS 5853 (160 ksi tensile strength)

A286 bolts per AMS 5853 are solution treated and work-strengthened. AMS 5853 bolts are unique because they are further strengthened by being cold-reduced by approximately 15%. This process provides AMS 5853 bolts an extreme tensile strength of 160 ksi/ 1103 MPa after aging. In addition, AMS 5853 offers excellent oxidation resistance at temperatures up to 1200°F (650 °C).

AMS 5726

Due to its extraordinary strength, this rare form of A286 finds a role in jet engine parts, industrial gas turbines and superchargers. AMS 5726 bolts are solution heat treated and work-strengthened. Bolts produced from AMS 5726 are also 40-50% cold reduced and can provide a tensile strength of 200 ksi/ 1379 MPa.

A286 / Alloy 660 Chemistry

A-286 — table
A-286FeNiCrTiMnMoSiCoVaAlCPSB
Min %-24.013.51.91.00.10.003
Max %Bal27.016.02.352.01.51.01.00.50.350.080.0250.0250.01

Mechanical Properties

A286 STAINLESS STEEL- MECHANICAL PROPERTIES
Material Condition
(Grades A-D per ASTM A453)
Ultimate Tensile (ksi)
min
Yield Strength at
0.2% Offset (ksi)
min
Elongation
%
RA %
min
A130851518
B130851518
C130851518
D1301051518
Cold Worked1601201218

A-286 tensile curve: tensile strength, 0.2% offset yield strength, and elongation versus temperature.

A286 mechanical properties (tensile strength, 0.2% offset yield strength, reduction of area, elongation) across cryogenic-to-high temperatures, from about -330 F to 1500 F.

A286 - Frequently Asked Questions

Answers from our engineers, drawn from the A286 technical questions we're asked most.

Quick Guide to Aerospace Fastener Materials

<p <img src="/blog/2026/06/MP35N photo-300x206.png" alt="" width="300" height="206" data-align="left" / </p <p Aerospace materials are not just components, they are mission-critical decisions. Every fastener must perform flawlessly. As an <a href="/quality" AS9100 certified</a supplier, the engineers at Extreme Bolt have in-depth knowledge to guide you through some of the most relevant <a href="/industries/aerospace" aerospace fastener</a materials.</p <p </p <p </p <p </p <table <tbody <tr <td <a href="/materials/inconel" <img src=" alt="inconel 718 box6 2 v3" width="442" height="896" / </a </td <td <a href="/materials/a286" <img src=" alt="a286 box6 2" width="441" height="899" / </a </td </tr <tr <td <a href="/materials/waspaloy" <img src=" alt="waspaloy box6 2" width="442" height="899" / </a </td <td <a href="/materials/mp35n" <img src=" alt="mp35n box6 2 v2" width="437" height="898" / </a </td </tr <tr <td <a href="/materials/titanium/grade-5" <img src=" alt="titanium box6 2" width="439" height="896" / </a </td <td <a href="/materials/aluminum-7075" <img src=" alt="alum box6 2 v2" width="434" height="897" / </a </td </tr </tbody </table <p </p

Looking for a corrosion resistant nylon lock nut with high tensile load. Need 1/2″-20 fine thread nut with > 20,0000 lbs tensile load capability. Very interested in A286. Do you think this is a good solution?

A286 1/2″-20 nylon lock nut would definitely meet the requirement of 20k lb proof load without issue. Keep in mind a nylon insert lock nut is only capable of servicing applications to 350F due to the polymer insert. Higher temps will require an all metal lock nut.Regarding your need for corrosion resistance, we would need a lot more information as this is highly dependent on the environment, however A286 is a stainless steel and will have similar corrosion resistance to 316.

I have an application that requires a bolt similar in strength to alloy steel but it also has to be non-magnetic. Any ideas?

A good option for you is A286 stainless steel cold worked to 160ksi tensile strength. A286 bolts are made of an extremely strong age-hardened stainless steel which can be further cold worked to a higher tensile strength. A286 boltswill also provide you the non-magnetic bolt you need.

Extreme Bolt Teams-Up with NASA for Artemis Program

![]( work has not only enhanced our understanding of space, but also provided extensive scientific developments for mankind. Extreme Bolt is proud to contribute the most advanced engineered fasteners to NASA’s Artemis Orion spacecraft program. Let’s review a few of the specialty materials used for space exploration.

A286

With a wide range of temperature stability, A286 bolts can be age-hardened to different levels of strength.

- High strength, creep resistance and oxidation resistance to 1300°F - Subzero capabilities of ductility and non-magnetic down to -320°F - Cold worked grade A286 can provide additional UTS to 160ksi

Inconel 718

Aerospace engineers rely on age-hardened Inconel 718 bolts for their high yield strength and usability to 1800°F.

- Good creep and rupture strength with a high resistance to fatigue, even when subjected to extreme pressure and heat - Heat treatments offering tensile strength range of 185-220ksi - Strength and ductility at cryogenic temperatures to -320°F

MP35N

The strongest material available to industry, MP35N bolts can provide ultra-high strength, toughness, and ductility.

- Unparalleled tensile strength of 227-294 ksi - Good high temperature oxidation resistance

AMS and NAS Bolts

Extreme Bolt can provide fasteners to most AMS specifications. These standards focus on performance, durability, and compliance in aerospace applications. In addition, Extreme Bolt offers NAS fasteners, as well as custom to print modified NAS parts.

Special Thanks to NASA

Orion is the only current spacecraft capable of crewed deep-space flight, which has unbelievable potential for science, engineering, and the creation of technologies to benefit humanity and our planet. As a small business, Extreme Bolt & Fastener couldn’t be more excited to be a part of a program that has such a vast impact on us all.

We are essentially having issue identifying the highest available high strength stainless steel nylon insert nuts. Is Duplex 2205 the best option?

If you are just looking for strength for your lock nut with a nylon insert, one of the highest strength stainless steel’s you could consider would be 17-4 PH (ranging from 136-190KSI)

A286 locknuts are a good option as well with good high temperature stability (130 KSI)

Duplex lock nuts are also much stronger than 316 with about 120KSI tensile strength. Duplex also offers better corrosion resistance. This material is not as strong as A286 or 17-4

What is the difference between A286 per AMS 5737 and AMS 5732?

A286 is an age hardened material. These AMS – aerospace standards – pertain to how the A286 material is solution treated and hardened:

• AMS 5737 is solution treated at 1650°F and precipitation heat treated (aged).

• AMS 5732 is solution treated at 1800°F and precipitation heat treated (aged).

But what does this all really mean? Basically, when solution treated at 1800ºF (980ºC) A286 bolts will have the highest creep-rupture strength in age-hardened material whereas the 1650ºF (900ºC) treatment provides A286 bolts with improved ductility and room temperature strength. In addition these specifications also alter the strength of an A286 bolt.

A286 Bolts per AMS 5737

• Tensile Strength: 140 ksi (965 MPa)

• Yield Strength at 0.2% Offset: 95 ksi (655 MPa)

A286 Bolts per AMS 5732

• Tensile Strength: 130 ksi (896 MPa)

• Yield Strength at 0.2% Offset: 85 ksi (586 MPa)

What our customers say

More customer feedback
“I purchased from you specifically because of Jon’s expertise and professionalism.”
“Very impressed; good prices and delivered earlier than lead time given, which was a real bonus.”
“Extreme Bolt is definitely on my go-to list.”

Questions?

Our material experts are ready to help guide you through your specific application.