Technical Questions – FAQ’s
Last updated
463 posts · page 7 of 31
Hastelloy C22 Compared C276 in Hydrochloric Acid
Q: I have a maintenance shut-down and am looking into replacing the 2.4602 / Hastelloy C22 bolts and nuts in. To save time, I was thinking of using Hastelloy C276 / 2.4819 fasteners since I’m hoping to get stock parts. My medium is mainly hydrochloric acid approximately 20%. Would 2.4819…
Continue readingOxidation resistance of A286 compared to A4L/316L
Q: What is the corrosion (oxidation) resistance of 1.4980 (A286) fasteners compared to 1.4404 (A4 / 316L ) fasteners? A: A286 / 1.4980 bolts provide excellent oxidation resistance up to 1500°F (815°C). This makes 1.4980 bolts ideal for high temperature exhaust streams. In comparison, 316L / 1.4404 bolts can typically…
Continue readingInconel Bolts: AMS 5662 vs AMS 5663
Q: What is the difference between Inconel bolts per AMS 5662 and AMS 5663? A: AMS 5562 and AMS 5663 are material standards from SAE International that describe Inconel 718 (UNS N07718) / 52,5Ni – 19Cr – 3.1Mo – 5.1(Cb + Ta) – 0.90Ti – 0.50Al / NiCr19MoNb. The difference…
Continue readingA4-70 A4-80 and A4-100 High Strength Screws
Q: I have difficulties getting A4-70 A4-80 and A4-100 screws in small sizes (M4, M5 and M6). Can you suggest suitable material alternatives? A: A4 (A4 (1.4401 / 1.4404) is an excellent material for high strength bolts. A4-70 and higher strength screws in small sizes (up to M8) are not…
Continue readingComparing Monel and Inconel
Q: What is the difference between Inconel and Monel?A: Both Monel and Inconel are nickel alloys but that is where the similarity ends. Briefly, Monel bolts are mostly used for saltwater corrosion resistance and high strength. They also offer excellent resistance to HF (hydrofluoric acid). Inconel is known for its…
Continue readingMonel for Cryogenic Applications
Is Monel usable at cryogenic temperatures?Not only does Monel offer excellent high strength at temps to 1000F, it is also usable in subzero temperatures. Monel 400 has demonstrated good toughness and ductility in US Navy Tear Tests down to -320F. In addition, K500 bolts offer increased strength, with little loss…
Continue readingTitanium Bolts & 316 Stainless – Galvanic Corrosion Risk
Q: I would like to use titanium alloy (Grade 5 / Ti6AL4V / 3.7164 / 3.7165) fasteners in combination with stainless steel (Grade 316L / 1.4404). The titanium alloy screws offer higher strengths than Stainless steel. Is it safe or is there a risk of galvanic corrosion? A: Titanium and…
Continue readingAdvantages of Monel Bolts
Q: What are the advantages of Monel metal?A: Monel bolts are a nickel alloy that offers many advantages. - Monel bolts are extremely saltwater corrosion resistant. Monel can provide years of seawater service without corroding. - Monel offers high strength, with K500 offering double the strength of Monel grade 400.…
Continue readingCan Monel Bolts Rust?
Q: Is Monel rust proof?A: Monel is one of the primary materials we recommend for saltwater corrosion resistance. Monel bolts are also the go-to material by the navy for marine and seawater conditions. In terms of water, saltwater and sea air, Monel is very corrosion resistant – so it won’t…
Continue readingDisadvantages of Monel Bolts
Q: What are the disadvantages of Monel?A: The primary use of Monel bolts is for saltwater corrosion resistance as well as high strength. Monel bolts are typically not used for harsh acids, with the exception of hydrofluoric acid – where they outperform almost any material, even pure tantalum.
Continue readingMonel Bolts Compared to Stainless Steel
Q: Is Monel better than stainless steel? A: Monel bolts will offer improved resistance to saltwater over stainless steel. As a nickel alloy, Monel will provide much better general corrosion resistance as well. Monel is also known for its unmatched resistance to hydrofluoric acid which will even corrode pure tantalum.In…
Continue readingMonel Bolts
Q: What is a Monel Bolt?A: Monel bolts are made of Nickel copper alloy known as Monel. They can also be referred to as Alloy 400 bolts or Alloy K500 bolts depending on the grade. Monel bolts come mainly in two grades Monel 400 and Monel K500. Both offer similar…
Continue readingMonel Compared to Titanium
Q: Is Monel better than titanium?A: Monel bolts and Titanium bolts have both similarities and differences. Both materials offer excellent resistance to saltwater. The only difference would be that Titanium has a slight advantage in stagnant seawater which can cause some corrosion to Monel. Both are the top materials in…
Continue readingMonel Pricing
Q: Why is Monel expensive?A: Monel is a nickel alloy. Nickel alloys in general can be expensive due to their high level of nickel content. In general Monel 400 bolts will be more economic and readily available than K500 bolts. Monel K500 is more costly than grade 400 because it…
Continue readingStrength of Monel compared to stainless steel
Q: Is Monel stronger than stainless steel?A: In terms of strength, there are many grades of steel and stainless steel. Some of them are even cold-worked for added strength. So to compare Monel to “steel” would be a very broad question – and difficult to answer without knowing the specific…
Continue reading
