Skip to main content
Extreme Bolt & Fastener
Quote

Non-Conductive

Last updated

To isolate critical components

Need help choosing a material?

Non-conductive fasteners are critical in many electronic applications or applications where it is essential to electrically isolate components. Extreme Bolt & Fasteners offers non-conductive fasteners in both polymer and ceramic materials. These materials are both thermally and electircally excelent insulators. 

Engineered Polymers

Advanced Ceramics

ELECTRICAL PROPERTIES OF POLYMER & CERAMICS
PropertyASTM / UL
Test
PEEK
Unfilled
PEEK
Glass Fiber
Torlon®
PAI 4203
Kynar®
PVDF
Vespel®
Polyimide
Teflon®
PTFE
Teflon®
PFA
AluminaZirconia
ELECTRICAL
Dielectric Strength (V/mil) short time, 1/8" thickD1494801905801700560600650023050
Dielectric Constant at 1 MHzD1503.33.73.98.53.552.12.031028
Dissipation Factor at 1 MHzD1500.003-0.0260.0150.0034< 0.00020.00010.0001-
Volume Resistivity (ohm-cm) at 50% RHD25710161016> 10162x1014>1014> 1018> 10181x1014> 1012

Non-Conductive Fasteners - Frequently Asked Questions

Are non-conductive fasteners suitable for cryogenic applications like liquid helium?

Yes. PTFE and PEEK fasteners can withstand a cryogenic environment while remaining electrically non-conductive, making them suitable for applications such as cryogenic helium. PTFE also offers excellent corrosion resistance, while PEEK provides higher strength.

What is the strongest non-conductive screw you offer, close to the strength of stainless steel?

Glass fiber reinforced PEEK screws are the strongest non-conductive option, with nearly double the tensile strength of natural PEEK at about 22,800 psi. Alumina ceramic screws are also very strong but expensive and fragile from a toughness standpoint.

Can non-conductive fasteners handle high temperatures?

For temperatures under 500F, engineered polymers work well and PEEK is the most economic choice up to about 500F. For higher temperatures, a ceramic like alumina is an excellent insulator and is resistant to heat well over 2000F.

How do you torque polymer non-conductive fasteners, and do they lose preload?

Torque on polymers is best determined empirically: break a few parts, measure the torque, and then torque to about 60 to 70 percent of that break load. Glass reinforced polymers hold their tension better through heating and cooling cycles.

Do non-conductive polymer fasteners work with locking inserts, and do they outgas?

Locking inserts are not used on polymer parts, since most of the polymers offered are fluorinated based and generally don't stick to anything; a nylon patch is possible but uncommon. Fluorinated polymers such as PEEK, PFA, PTFE, and PVDF all have very low outgassing.

Which materials are non-conductive fasteners available in?

Extreme Bolt & Fastener offers non-conductive fasteners in both engineered polymers and advanced ceramics. Polymer options include PEEK, PTFE, PVDF, Torlon, and Vespel, while ceramic options include Alumina and Zirconia. These materials are excellent thermal and electrical insulators.

Questions?

Our material experts are ready to help guide you through your specific application.