Skip to main content
Extreme Bolt & Fastener
Quote

Pan Head Screws

Last updated

Made of specialty metals, polymers and ceramics

Pan Head ScrewsPan head screws have a top that looks like an upside-down frying pan. They can be made with a slotted or philips driver depending on the material and fastener size. They are ideal for:

  • Small diameter fasteners – especially when the fastener size needed is too small for a wrench.
  • When phillips or slotted drivers are desired. For many high strength specialty alloys, only slotted drives are available.
  • Low torque applications because the drivers don’t offer as much force as a wrench.
  • Large diameter head provides more clamping area.

How Are They Different from Button Head Screws?

PEEK pan head and button head screws have very similar profiles however, button head screws allow for a hex socket driver whereas pan head screws do not.

Pan Head Screw Sizes

  • #00 - 4"
  • M1.2 - M100
  • DIN 921

Pan Head Screw Specifications

  • ASME B18.6.3
  • DIN 7985
  • DIN 921
  • DIN 85 / ISO 1580
  • DIN 84 / ISO 1207 (cheese head)
  • DIN 966 / ISO 7047 (raised counter sunk)

Thread Options

Visit our thread options page for more information on Extreme Bolt's threading capabilities:

  • Thread types and attributes
  • Classes and tolerances
  • How threading can affect bolt performance
  • Specialty threads

Pan Head Screws - frequently asked questions

What is the difference between pan head screws and button head screws?

Pan head and button head screws have very similar profiles, but button head screws allow for a hex socket driver whereas pan head screws do not.

What sizes are pan head screws available in?

Pan head screws are available in inch sizes from #00 to 4 inches and metric sizes from M1.2 to M100, and are also produced to DIN 921.

What materials can pan head screws be made from?

They can be made from specialty metals such as Inconel, Hastelloy, Titanium, Monel, A286, Nitronic and Tantalum, among others; engineered polymers such as PEEK, PFA, PTFE, PVDF, Torlon and Vespel; and advanced ceramics including Alumina and Zirconia.

What specifications do Extreme Bolt pan head screws meet?

Pan head screws are available to ASME B18.6.3, DIN 7985, DIN 921, DIN 85 / ISO 1580, DIN 84 / ISO 1207 (cheese head), and DIN 966 / ISO 7047 (raised counter sunk).

What drive types and thread options are available for pan head screws?

They are available with slotted drivers, as well as Phillips depending on size and material, and can be supplied in fine and coarse threads, partially or fully threaded. For many high strength specialty alloys, only slotted drives are available.

When should I choose a pan head screw?

Pan head screws are ideal for small diameter fasteners too small for a wrench, low torque applications, and cases where a Phillips or slotted driver is preferred; their large diameter head also provides more clamping area.

Questions?

Our material experts are ready to help guide you through your specific application.