Skip to main content
Extreme Bolt & Fastener
Quote

Aerospace

Last updated

Specialty materials for aerospace fasteners

Need help choosing a material?

NAS image

Specialty materials and alloys are mission critical to aerospace applications. Materials such as A286, Inconel 718, Titanium, MP35N, and Waspaloy each offer unique characterists to serve this industry. At Extreme Bolt we can offer short runs, custom parts, and modified NAS fasteners along with a team of engineers who can offer you insight and expertise.

A286

A286 fasteners are made of an age hardened stainless steel alloy. They are known for their high temperature strength, as well as creep and oxidation resistance. In addition, A286 offers cryogenic capabilities, ideal for the subzero tempertures of space. 

Benefits:

  • Strength and oxidation resistance at temperatures up to 1300°F
  • Low temperature capabilities including ductility, non-magnetic, high strength to -196°C
  • Excellent high temperature corrosion resistance encountered in jet engine applications

Inconel 718

Inconel 718 is a precipitation-hardened nickel-chromium alloy that combines outstanding corrosion resistance and high strength at elevated temperatures. It's high temperature stability and toughness paired with cryogenic usability make Inconel 718 fasteners critical to spacecraft. 

Benefits:

  • Wide range of usability, with proven capabilities from -320°F to 1300°F
  • Good creep rupture strength
  • High resistance to fatigue
  • Strong resistance to chemicals and acids at high temperatures

Titanium

Both military and commercial engineers utilize titanium fasteners for their superior strength-to-weight ratio, helping them to build lighter and more fuel efficient aircraft. 

Benefits:

  • Titanium grade 5 is about 4x stronger than stainless steel at nearly half the weight
  • Extraordinary resistance to chlorides
  • Non-magnetic
  • Does not conduct heat or electricity well

MP35N

The superman of materials, MP35N defines strength. It is a nickel-cobalt based alloy that boasts ultra-high strength, toughness, and ductility. 

Benefits:

  • Maintains strength in maximum operating temperature of 800°F
  • Tensile strength of 260ksi minimum, typically ~285ksi
  • Resistant to crevice and stress corrosion cracking

Waspaloy

This  nickel-based alloy delivers strength and reliability at extreme temperatures as high as 1600°F/870°C. Waspalloy is often used for the hottest aerospace components, where other super alloys such as Inconel 718 might fail.

Benefits:

  • Strength and high temperature stability that goes beyond Inconel 718
  • Relatively impervious to conditions of frequent thermal cycling
  • Low thermal conductivity
  • Excellent creep rupture strength

Aerospace - Frequently Asked Questions

Is there a polymer screw that meets low-outgassing requirements for satellites?

Yes, PEEK is the recommended polymer fastener for low-outgassing space applications. It appears in NASA's material outgassing database and will most likely meet the ASTM-E595 requirement of 1% total mass loss and 0.1% collected volatile condensable material.

Why is PEEK used for outgassing-sensitive aerospace parts?

PEEK is known for its low outgassing, which is also why it is widely used in electronic and medical applications. This property makes it suitable for satellites and other space hardware where volatile condensables must be minimized.

Which materials can aerospace and NAS fasteners be made from?

Extreme Bolt offers aerospace fasteners in A286, Inconel 718, Titanium, MP35N, and Waspaloy. Each alloy offers unique characteristics for mission-critical aerospace applications, and modified NAS fasteners, short runs, and custom parts are available.

Which aerospace fastener alloy handles the highest temperatures?

Waspaloy delivers strength and reliability at extreme temperatures as high as 1600°F/870°C. It is often used for the hottest aerospace components where other superalloys such as Inconel 718 might fail.

Which aerospace fastener materials work at cryogenic temperatures for space?

A286 offers cryogenic capabilities with high strength down to -196°C, ideal for the subzero temperatures of space. Inconel 718 has proven usability from -320°F to 1300°F, pairing high-temperature stability with cryogenic capability.

Why choose titanium fasteners for aircraft?

Titanium fasteners offer a superior strength-to-weight ratio, helping build lighter, more fuel-efficient aircraft. Titanium grade 5 is about 4x stronger than stainless steel at nearly half the weight, is non-magnetic, and has extraordinary resistance to chlorides.

Questions?

Our material experts are ready to help guide you through your specific application.