Skip to main content
Extreme Bolt & Fastener
Quote

Technical Questions – FAQ’s

Last updated

463 posts · page 23 of 31

  • Monel Bolts for Improved Saltwater Resistance to 316

    Q: We are installing denso jackets around several steel piles at a wharf. The jackets are going to be held together by A316 stainless steel bolts. After doing a test on a few, they came back heavily corroded. Can you suggest a material that can handle the salt water? A:…

    Continue reading
  • Monel Bolts Over Nickel 200 for Aqueous Hydrofluoric Acid

    Q: I’m using aqueous Hydrofluoric acid in a silicon etching process but amy Nickel 200 bolts aren’t holding up. Is there a better material I can use?A: Nickel 200 fasteners are excellent for use in anhydrous hydrofluoric acid, but in the aqueous form of HF acid they offer limited resistance.…

    Continue reading
  • Nickel 200 Bolts for Sodium Sulfide & Sodium Hydroxide

    Q: I work in a plant that manufactures paper. We’re treating pulp with a solution containing sodium sulfide and sodium hydroxide to dissolve the wood materials and produce cellulose to make paper. Can you suggest a material that can give our bolting some corrosion protection and better longevity. Some of…

    Continue reading
  • Molybdenum Screws for 1000°C High Vacuum

    Q: We are interested in a fastener material that can work at 1000°C in high vacuum? Do you have any suggestions?A: For high temperature vacuum environments, a great material to consider for your fasteners would be Molybdenum screws. Molybdenum screwshave an extremely high melting point of over 2600°C combined with…

    Continue reading
  • MP35N for Extreme Strength of 230 ksi

    Q: I am in need of six 7/8″ diameter bolts, 9″ in length, that can withstand about 230,000 psi in tensile stress for infrastructure project. Do you have any bolt that can meet this strength requirement? A: When you are talking about extremely high strength in the range of 230…

    Continue reading
  • Nickel 200 Bolts for Chlor Alkali Process

    Q: I’m running a chlor alkali process to produce sodium hydroxide. We would like bolts that have a strong resistance to the NaOH. Should I try hastelloy?A: In terms of caustic alkaline solutions, such as sodium hydroxide, your best bet would be Nickel 200 boltswhich are known to have excellent…

    Continue reading
  • Inconel Belleville washers offer high temperature strength

    Q: Isaw on the website that you produce Belleville spring washers. Are you also able to produce these in TZM? We are looking for Belleville spring washers which can withstand high temperatures to 500 degrees Celsius. A: Unfortunately, we can’t produce Belleville washers in TZM or other refractory metals,but we…

    Continue reading
  • A286 Bolts Ideal for High Temperature Exhaust Streams

    Q: I’m looking for bolts/nuts material able to withstand to cycling temperature changes from 20 Celsius up to 600 Celsius. Strength is also important . Looking for something with tensile strength at least 800 Mpa. The application is diesel engine exhaust manifold. Looking at your web site not sure Inconel…

    Continue reading
  • A286 Bolts for Diesel Engine Exhaust Stream

    Q: Looking for bolts that will be used for large Diesel engine exhaust compensators in a power plant. The normal operating temp of the exhaust is 700 degrees F at full load. Loads do fluctuate often and engines experience downtime. The exhaust system does experience extreme force and vibration. Any…

    Continue reading
  • Monel 400 Bolts for Naval Assembly

    Q: We are providing the Navy components made of Navy G Bronze that incorporates shoulder bolts and set screws. The assembly will be exposed to air, salt water, modest temperatures (0C to 80C), and limited stress. What alloy do you recommend? A: Sounds like a Monel 400 might be a…

    Continue reading
  • Pure Tungsten vs. Alloyed Tungsten Fasteners

    Q: I see that you list 5 different grades of Tungstenon your site, would you maybe help me choose which is the best for my application? A: There are two important differences. First, pure tungsten screws are stronger. For example 99.95% tungsten offers 142 ksi UTS vs Class 1 (90%…

    Continue reading
  • Age Hardened 17-4PH and A286 Bolts: Strength & Ductility

    Q:An application with limited space using a 4-40 screw with an assumed tensile strength of 120,000 PSI. This screw continues to break. Do you offer a screw with a higher strength? Also, This screw is used to hold a plate to the end of an air cylinder. It probably jars…

    Continue reading
  • 17-4 Corrosion Resistance and Strength?

    Q: I need a material that offers about 80-90ksi yield but is also corrosion resistant to low concentrations of sulfur acid. I’m tried 17-4Ph but its not working? Any ideas. A: Yes, 17-4PH fasteners are excellent for high strength like you need, but are not really geared for corrosion resistance…

    Continue reading
  • A4-80 vs Monel K500 Fasteners in Sea Water

    Q: For a marine project will 316SS cold worked (grade A4-80) hold up in strength pretty close to Monel K500? And what is the price comparison?A: Thanks for contacting and good question. The major difference is the strength and corrosion resistance. You will have decent strength of a A4-80 bolt…

    Continue reading
  • HCl Acid – Polymer, Zirconium or Tantalum Fasteners

    Q: We have on application that utilizes an HCl tank and are currently using hastelloy C276 bolts but they are not sufficient. Should we try tantalum fasteners or anther material like PEEK? The bolts are for a flanged valves connections concentration is 36%, temperature 45ºC.A: Though the HCl is not…

    Continue reading

Questions?

Our material experts are ready to help guide you through your specific application.