Skip to main content
Extreme Bolt & Fastener
Quote

Technical Questions – FAQ’s

Last updated

463 posts · page 2 of 31

  • Comparing Inconel 601 and 625

    Inconel 601 and 625 are both seemingly similar nickel alloys for extreme temperature applications – so how do you choose which is best for your application. Let’s look at the distinct capabilities of these two Inconel grades. High Temperature Focus: Inconel 601 For applications that focus solely on high temperatures…

    Continue reading
  • C276 Bolts Compared to Inconel 625 Bolts in Acids

    Q: Why are C276 bolts more resistant to harsh acids and chemicals than Inconel 625 bolts? Aren’t they both nickel alloys? A: Yes, both C276 and Inconel 625 are nickel alloys. Though nickel composition is critical to corrosion resistance, other metals also play a role. Hastelloy fasteners have a higher…

    Continue reading
  • Hastelloy and Inconel Applications

    Q: What are Hastelloy C276 and Inconel 625, and what are they typically used for? A: Both Hastelloy bolts and Inconel 625 bolts are made of nickel alloys designed for extreme industrial environments. In brief comparison, C276 bolts offer improved corrosion resistance over Inconel 625 bolts in harsh acids and…

    Continue reading
  • Hastelloy Bolts Compared to Inconel 625 Bolts in Harsh Acid

    Q: Are Hastelloy C276 bolts a better choice than Inconel 625 bolts in severe acid situations? A: Yes, Hastelloy C276 bolts perform far better than Inconel 625 in harsh acids. Hastelloy was specifically designed for this type of service. Due to its higher molybdenum, C276 fasteners offer excellent resistance to…

    Continue reading
  • Hastelloy Bolts for Dry Chlorine Corrosion

    Q: Can Hastelloy C276 fasteners be used in dry chlorine applications? A: Yes, Hastelloy C276handles dry chlorine gas exceptionally well. In fact, dry chlorine is much less corrosive to C276 bolts than wet chlorine, allowing Hastelloy to be safely used at far higher temperatures.

    Continue reading
  • Hastelloy Bolts in Wet Chlorine Gas

    Q: Can Hastelloy C276 bolts handle wet chlorine gas? A: Yes, in some wet chlorine environments, C276 fasteners are an excellent option. At moderate or room temperatures, Hastelloy bolts are almost immune to wet chlorine gas, experiencing an incredibly low rate of corrosion. Though as temperatures rise, especially at temperatures…

    Continue reading
  • Hastelloy C22 vs C276 Bolts in Oxidizing Environments

    Q: In oxidizing environments, should I use Hastelloy C276 bolts or C22 bolts? A: Chromium provides an excellent shield against oxidizing chemicals. C22 bolts have 6% more chromium in comparison to C276, giving C22 the advantage.

    Continue reading
  • Hastelloy C276 Bolts vs C22 Bolts in Acid

    Q: Which is better in harsh acid environments Hastelloy C276 bolts or Hastelloy C22 bolts? A: C276 bolts have a higher level of molybdenum and tungsten in their chemical composition, which makes them a better choice for acidic environments like hydrochloric or sulfuric acid.

    Continue reading
  • Hastelloy C276 Use in Oil Wells for Sour Gas H2S

    Q: Are Hastelloy C276 bolts a good choice for use in oil wells? I have a sour gas environment that requires a high level of corrosion protection. A: Yes, Hastelloy C276 fasteners are considered one of the premier materials for use in H2S, also known as sour gas. - One…

    Continue reading
  • Hastelloy C276 vs. C22 in Oxidizing Salts

    Q: What are oxidizing salts, and why are they so dangerous? A: Often found in industrial wastewater, oxidizing salts like ferric and cupric chlorides can be “corrosion superchargers.” When these salts contaminate an acid, they trigger pitting and crevice corrosion which speeds up the corrosion process. Hastelloy C276 bolts offer…

    Continue reading
  • Specialty Bolts for Crevice Corrosion

    Q: Why is saltwater crevice corrosion so tough on metals? A: Saltwater contains chlorides that can be highly corrosive to many various metals including common grades of stainless steel. The most common corrosion concern in saltwater is crevice corrosion. This happens when saltwater gets trapped and remains stagnant in tight…

    Continue reading
  • Galvanic Corrosion: PEEK & Titanium compatibility with Carbon Fiber

    Q: I have a need to replace my current coated stainless steel fasteners with a material that can harmoniously with carbon fiber in a marine application. Do you have a recommendation for this?A: With a metal being in contact with carbon fiber in a marine environment you will be susceptible…

    Continue reading
  • NASA-STD-8739 Provides Guidelines on NASA Fastener Procurement

    Q: I work for a government subcontractor. I’m looking for some guidance on fastener procurement for a NASA project. Can you help? A: We can always provide engineering advice on space flight materials but when it comes to NASA fastener procurement procedures, the best option is to utilize the government…

    Continue reading
  • Titanium for Chlorine Resistance

    Q: I need a fast and reliable fastener solution for a chlorinated water environment. We work in commercial swimming pools and need a quick solution that can handle both chlorine corrosion and be rust free.A: One of the best solutions for chlorinated water that will never rust is titanium. Titanium…

    Continue reading
  • Passivation and Nickel Alloys bolts

    Q: Can I or should I passivate a nickel alloy bolts?A: Passivation is a chemical process which removes free iron from stainless steels. This creates a more robust surface or a “passive” surface to minimize corrosion and rust on the surface of a fastener. We do not recommend passivating nickel…

    Continue reading

Questions?

Our material experts are ready to help guide you through your specific application.