Skip to main content
Extreme Bolt & Fastener
Quote

Polyimide Set Screws / Vespel Set Screws

Last updated

The ultimate temperature resistant polymer

Need help choosing a material?

set screw s

Polyimide set screws or Vespel® set screws are made from an advanced temperature resistant polyimide resin. Vespel screws offer a unique balance of mechanical, thermal, and chemical properties for outstanding performance in a variety of demanding applications such as automotive, machinery, industrial equipment, aerospace, and semiconductor equipment.

Vespel set screws also have the unique combination of properties such as excellent mechanical strength and toughness, exceptional radiation resistance, robust chemical resistance to many solvents, a low coefficient of thermal expansion, excellent creep resistance and flame retardance.

Vespel screws are available in both metric and standard sizes. Contact us to learn more about polyimide set screws or Vespel set screws properties and availability.

Screw Types: Flat Head Screws, Hex Cap Screws, Pan Head Screws, Set Screws, Socket Head Cap Screws


Vespel Set Screw Features & Benefits

Vespel set screws are unique in that they have no screw head, meaning that they have no protruding part past the threaded shaft. They are thread only and are available with a socket or slotted driver insert at one end. Set screws are used to secure an object within or against another object. Typically they secure a rotating part such as a gear or shaft. Vespel set screws are driven through a threaded hole in the rotating part until it is tight against the inner object, preventing from moving relative to the outer object. Set screws are available with various points depending on the application.

cup point

Cup Point

This is the most commonly used set screw and is identified by a cup-shaped indentation on one end. Vespel cup points are typically used for a quick, semi-permanent or permanent applications where it is acceptable to cut the cup point edge of the screw.

Cone Pointcone point
A cone point is easily identifiable by its sharp cone-shaped point – just like an ice cream cone. Vespel cone point set screws deliver the strongest clamping force due to the deep penetration of the point. As a result they are used for permanent assembly.

flat point set

Flat Point

The cheapest and simplest of the set screw point styles, this screw has a flat surface on the bottom of the screw. This type is used when you need the ability to frequently change parts and require minimal shaft deformation.

 


 

Vespel Properties

     

POLYIMIDE / VESPEL PROPERTIES
PropertyASTM or UL TestVespel®
Polyimide
PHYSICAL
Density (lb/in³)
(g/cm³)
D7920.051
(1.43)
Water Absorption, 24 hrs (%)D5700.24
MECHANICAL
Strength/Weight RatioTensile Strength / Density (g/cc)8700
Tensile Strength (psi)D63812,500
Tensile Modulus (psi)D638450,000
Tensile Elongation at Break (%)D6387.5
Flexural Strength (psi)D79016,000
Flexural Modulus (psi)D790450,000
Hardness, Rockwell, R/M ScaleD785M90
IZOD Impact Notched (ft-lb/in)D2560.8
THERMAL
Coefficient of Linear Thermal Expansion (x 10-5 in./in./°F)D6963
Heat Deflection Temp (°F / °C) at 264 psiD648680 / 360
Melting Temp (°F / °C)D3418none (degrades ~500 °C)
Max Operating Temp (°F / °C)-572 / 300
Thermal Conductivity (BTU-in/ft²-hr-°F)C1772.0
Flammability RatingUL94V-0
ELECTRICAL
Dielectric Strength (V/mil) short time, 1/8" thickD149560
Dielectric Constant at 1 MHzD1503.55
Dissipation Factor at 1 MHzD1500.0034
Volume Resistivity (ohm-cm) at 50% RHD257>1014
APPROVALS
ApprovalFDANO
ApprovalUSDANO
ApprovalNSFNO
Approval3A DAIRYNO
ApprovalUSP CLASS VINO

Vespel Mechanical Data

VESPEL - Tensile Data
Temperature
(°F)
Ultimate Tensile
(ksi)
Room Temp.12.5
5006.0

Chemical Resistant Vespel screws

VESPEL CORRSION DATA
Chemical
Media
Temperature
°C
Time
(Hours)
% Tensile Strength
Retained (SP1)
Organic Solvents
M-Cresol2001,00075
o-Dichlorobenzene1801,000100
Diethyl Ketone1001,900100
Ethanol1001,900100
Nitrobenzene2151,00085
Perchloroethylene1001,900100
Toluene1001,90085
Industrial Fluids
Hydraulic Fluid (Skydrol) Polyphosphate Ester1201,000100
JP-4 Jet Fuel1001,90080
Jet Engine Oils (MIL L 7807G)260 260600 1,00060 (90)
30 (60)
Mineral Oil2001,00070 (90)
Silicone Fluid2601,00080
Tricresyl Phosphate (oil additive)2601,00080
Acids
Acetic 15%1001,90020
Hydrochloric 38%2312070
Hydrochloric 5%1001,90015
Nitric 70%2312040
Bases
Sodium Hydroxide 5%2312055
Oxidizing Agents
Nitrogen Tetroxide2312060

More Vespel (Polyimide) products

Questions?

Our material experts are ready to help guide you through your specific application.