Skip to main content
Extreme Bolt & Fastener
Quote

PVDF (Kynar) Fasteners - Bolts, Screws & Nuts

Last updated

Exceptional purity and chemical resistance

Need help choosing a material?

PVDF Upsplash Free Laboratory
  • High Purity and low extractables
  • Chemically resistant to many harsh environments
  • Mechanical strength and toughness to 150°C (300°F)
  • Resistance to a broad range of sterilization methods
  • Resistance to weathering and fungi
  • Custom injection molded & machined parts
  • PVDF material datasheet

PVDF fasteners, also known as Kynar, are made from a tough engineered fluoro-thermoplastic that offers a unique balance of excellent chemical resistance and good strength properties.

Resistant to:

  • Ultraviolet and nuclear radiation
  • Standard sterilization methods
  • Weathering and fungi
  • Common solvents, acids, salts, oils and steam

PVDF fasteners have the characteristic stability of fluoropolymers when exposed to harsh chemical and ultraviolet environments but are much stronger mechanically than PTFE or PFA polymers.  PVDF fasteners also excel in high purity and low-permeability applications such as pharmaceutical and semi-conductor processing.

PVDF fasteners are available in most metric and standard sizes. See our online store (top right) for common sizes or contact us for your specific requirements.


PVDF Mechanical  & Physical Properties

PVDF / KYNAR PROPERTIES
PropertyASTM / UL
Test
Kynar®
PVDF
PHYSICAL
Density (lb/in³)
(g/cm³)
D7920.064
(1.77)
Water Absorption, 24 hrs (%)D5700.03
MECHANICAL
Strength/Weight RatioTensile Strength /4000
Tensile Strength (psi)D6387,000
Tensile Modulus (psi)D638290,000
Tensile Elongation at Break (%)D63850
Flexural Strength (psi)D7909,700
Flexural Modulus (psi)D790290,000
Hardness, Rockwell, R/M ScaleD785R80
IZOD Impact Notched (ft-lb/in)D2563
THERMAL
Coefficient of Linear Thermal Expansion (x 10-5 in./in./°F)D6966.6
Heat Deflection Temp (°F / °C) at 264 psiD648230 / 110
Melting Temp (°F / °C)D3418332 / 166
Max Operating Temp (°F / °C)-300/ 150
Thermal Conductivity (BTU-in/ft²-hr-°F)C1771.2
ELECTRICAL
Dielectric Strength (V/mil) short time, 1/8" thickD1491700
Dielectric Constant at 1 MHzD1508.5
Dissipation Factor at 1 MHzD1500.015
Volume Resistivity (ohm-cm) at 50% RHD2572x1014
APPROVALS
ApprovalFDAYES
ApprovalUSDAYES
ApprovalNSFYES
Approval3A DAIRYYES
ApprovalUSP CLASS VIYES
PVDF Strength Data
Ultimate Tensile (ksi)Yield Strength (ksi)
6.5 - 8.05.0 - 8.0
*Measured at room temperature

PVDF Chemcial Resistance Compared to Other Polymers

PVDF Chemical Resistance 


PVDF (Kynar) fastener styles

PVDF (Kynar) Bolts

PVDF (Kynar) Nuts

PVDF (Kynar) Studs & Threaded Rods

PVDF (Kynar) Washers

PVDF (Kynar) - Frequently Asked Questions

Answers from our engineers, drawn from the PVDF (Kynar) technical questions we're asked most.

Am I right in understanding that polymer fasteners are  chemically resistant? I know they are not nearly as strong or temperature resistant as a metal, but our temperatures are ambient so would this work for me?

For HCl, you would want to consider PVDF polymer fasteners. These are relatively strong polymers and very corrosion resistant. They will be fine in the HCl environment, its just a matter if they are strong enough for your application. To be honest, I am not sure if they will be more economic than the C276. It will depend on the sizes you need. Here is some info on PVDF:

https://www.extreme-bolt.com/pvdf-kynar-fasteners.html

Polymers at Cryogenic Temperatures

<u Polymers at Cryogenic Temperatures</u

Most often people want to know how hot a material can be used up to in an application, however for cryogenic applications, in media like liquified gasses (nitrogen, oxygen, carbon dioxide, LNG, etc.), we need to understand how materials perform at very cold temperatures. Polymer fasteners offer an excellent solution in cryogenic environments (including temperatures below -150°C) while minimizing thermal conductivity. As cryogenic applications grow, this area of engineering is finding its way into many industries such as:

• Supercomputers

• Pharmaceutical/biosciences applications

• Superconductors

• Magnetics

Benefits of Using Polymers in Cold Environments

• Low thermal conductivity

• Electrical insulating properties

• Sealing performance

• Ability to function as friction and wear surfaces without external lubrication

• Mechanically stable

That said, polymers do have their trade-offs at cryogenic temperatures. Generally, they become stronger, stiffer and harder – therefore less tough and hence more brittle. But even though their stiffness increases and impact strength is lowered at low temperatures, generally polymers will return to “normal” when heated up again.

Fluoropolymer for Low Temperatures

One class of polymers that excel at cryogenic temperatures are fluoropolymers. Examples of fluoropolymers are PVDF, PTFE and PFA. Like many materials they lose their flexibility at low temperature, but what is unique is that they retain their lubricity, abrasion resistance, and strength. Research has shown that PTFE that it is among the top fluoropolymers for cryogenics. PTFE can be used down to -328 °F (-200 °C) while showing little or no brittleness. It also remains highly flexible to nearly -100 °F below. While there are other fluoropolymers that can perform in extreme cold environments, they are not able to retain their material capabilities like PTFE.

Filled vs Unfilled Polymers

It’s important to point out that fiber reinforcements such as glass or carbon will make the polymers more brittle at cryogenic temperatures. However, if a polymer is being used for an application that involves large changes in temperature, it is a best practice to select a filled grade which will stabilize expansion. This chart shows that PEEK expands approximately 1% compared to only 0.3%. for 30% glass fiber reinforced PEEK.

Ductile / Brittle Transition Temperature Values

I’m looking for a polymer fastener that can withstand ultraviolet radiation, but is also FDA approved as this is for a pharmaceutical application. Temperatures are around 100C.

For this application, a good choice would be PVDF fasteners. PVDF screwsare both FDA approved and are ideal for handling ultraviolet radiation. They are often used in pharmaceutical applications. Their max temperature rating is about 150C so they should be a good solution.

I’m looking for a polymer insert locknut for a marine environment.  Can you make any suggestions?

In your marine lock nut application, the polymer you should consider for the locking mechanism would be PVDF (Kynar). PVDF polymer in combination with the lock nut would perform very well in a marine environment. This polymer will not be affected by sea water or UV and is much more stable than Nylon.

I need a polymer fastener that can withstand high temp pharma sterilization processes? There may also be chemical contaminants in the process.

Depending on the temperatures you are looking at, the three options to consider would be PEEK, PVDF or PTFE fasteners. PEEK fasteners can be used to 500F. They are also resistant to many chemicals. Another option are PVDF fasteners. PVDF fasteners can only be used to 300F but offer a higher level of chemical resistance than PEEK. Finally there is PTFE. PTFE fasteners could be taken to 500F and are the most chemically inert of all the polymers. However the trade-off with PTFE is that it is also the weakest. All these polymers PVDF, PTFE and PEEK screws are approved by the FDA and USDA, so they are ideal for high purity pharmaceutical processes.

I’m looking for a polymer that can be exposed to low concentration of sulfuric acid. Which polymer do you recommend? I tried PTFE but they don’t seem to be as strong as I need.

PTFE and PFA fasteners offer the highest polymer corrosion resistance but the trade-off is lower strength. You may want to try PVDF fasteners. PVDF screws are slightly less corrosion resistant but hold up well in sulfuric acid and offer much higher strength than PTFE or PFA. PVDF is also usable to about 150°C (300°F)

What our customers say

More customer feedback
“I purchased from you specifically because of Jon’s expertise and professionalism.”
“Very impressed; good prices and delivered earlier than lead time given, which was a real bonus.”
“Extreme Bolt is definitely on my go-to list.”

Questions?

Our material experts are ready to help guide you through your specific application.