Vespel (Polyimide) Washers
Last updated
The ultimate temperature resistant polymer
Need help choosing a material?
- Temperature resistant up to 300°C (572°F) continuous and 500°C (932°F) intermittent
- Low coefficient of friction and high wear resistance
- Chemically resistant to common solvents including acids, salts, and oils
- Low out gassing, low particle generation and inherent purity
- Unique physical, thermal & eletrical properties
- Vespel material datasheet
Polyimide washers or Vespel® washers are made from an advanced temperature resistant polyimide resin. Polyimide washers or Vespel washers offer a unique balance of mechanical, thermal, and chemical properties for outstanding performance in a variety of demanding applications such as automotive, machinery, industrial equipment, aerospace, and semiconductor equipment.
Polyimide washers or Vespel washers also have the unique combination of properties such as excellent mechanical strength and toughness, exceptional radiation resistance, robust chemical resistance to many solvents, a low coefficient of thermal expansion, excellent creep resistance and flame retardance.
Polyimide washers or Vespel washers are available in both metric and standard sizes. Contact us to learn more about polyimide washers or Vespel washers properties and availability.
Washer Types: Flat Washers
Vespel Properties
| Property | ASTM or UL Test | Vespel® Polyimide |
|---|---|---|
| PHYSICAL | ||
| Density (lb/in³) (g/cm³) | D792 | 0.051 (1.43) |
| Water Absorption, 24 hrs (%) | D570 | 0.24 |
| MECHANICAL | ||
| Strength/Weight Ratio | Tensile Strength / Density (g/cc) | 8700 |
| Tensile Strength (psi) | D638 | 12,500 |
| Tensile Modulus (psi) | D638 | 450,000 |
| Tensile Elongation at Break (%) | D638 | 7.5 |
| Flexural Strength (psi) | D790 | 16,000 |
| Flexural Modulus (psi) | D790 | 450,000 |
| Hardness, Rockwell, R/M Scale | D785 | M90 |
| IZOD Impact Notched (ft-lb/in) | D256 | 0.8 |
| THERMAL | ||
| Coefficient of Linear Thermal Expansion (x 10-5 in./in./°F) | D696 | 3 |
| Heat Deflection Temp (°F / °C) at 264 psi | D648 | 680 / 360 |
| Melting Temp (°F / °C) | D3418 | none (degrades ~500 °C) |
| Max Operating Temp (°F / °C) | - | 572 / 300 |
| Thermal Conductivity (BTU-in/ft²-hr-°F) | C177 | 2.0 |
| Flammability Rating | UL94 | V-0 |
| ELECTRICAL | ||
| Dielectric Strength (V/mil) short time, 1/8" thick | D149 | 560 |
| Dielectric Constant at 1 MHz | D150 | 3.55 |
| Dissipation Factor at 1 MHz | D150 | 0.0034 |
| Volume Resistivity (ohm-cm) at 50% RH | D257 | >1014 |
| APPROVALS | ||
| Approval | FDA | NO |
| Approval | USDA | NO |
| Approval | NSF | NO |
| Approval | 3A DAIRY | NO |
| Approval | USP CLASS VI | NO |
Vespel Mechanical Data
| Temperature (°F) | Ultimate Tensile (ksi) |
|---|---|
| Room Temp. | 12.5 |
| 500 | 6.0 |
| Chemical Media | Temperature °C | Time (Hours) | % Tensile Strength Retained (SP1) |
|---|---|---|---|
| Organic Solvents | |||
| M-Cresol | 200 | 1,000 | 75 |
| o-Dichlorobenzene | 180 | 1,000 | 100 |
| Diethyl Ketone | 100 | 1,900 | 100 |
| Ethanol | 100 | 1,900 | 100 |
| Nitrobenzene | 215 | 1,000 | 85 |
| Perchloroethylene | 100 | 1,900 | 100 |
| Toluene | 100 | 1,900 | 85 |
| Industrial Fluids | |||
| Hydraulic Fluid (Skydrol) Polyphosphate Ester | 120 | 1,000 | 100 |
| JP-4 Jet Fuel | 100 | 1,900 | 80 |
| Jet Engine Oils (MIL L 7807G) | 260 260 | 600 1,000 | 60 (90) 30 (60) |
| Mineral Oil | 200 | 1,000 | 70 (90) |
| Silicone Fluid | 260 | 1,000 | 80 |
| Tricresyl Phosphate (oil additive) | 260 | 1,000 | 80 |
| Acids | |||
| Acetic 15% | 100 | 1,900 | 20 |
| Hydrochloric 38% | 23 | 120 | 70 |
| Hydrochloric 5% | 100 | 1,900 | 15 |
| Nitric 70% | 23 | 120 | 40 |
| Bases | |||
| Sodium Hydroxide 5% | 23 | 120 | 55 |
| Oxidizing Agents | |||
| Nitrogen Tetroxide | 23 | 120 | 60 |


