Vespel Fasteners - Bolts, Screws & Nuts
Last updated
The ultimate temperature resistant polymer
Need help choosing a material?
- Temperature resistant up to 300°C (572°F) continuous and 500°C (932°F) intermittent
- Low coefficient of friction and high wear resistance
- Chemically resistant to common solvents including acids, salts, and oils
- Low out gassing, low particle generation and inherent purity
- Unique physical, thermal & eletrical properties
- Custom injection molded & machined parts
- Vespel material datasheet
Polyimide fasteners or Vespel® fasteners are made from an advanced temperature resistant polyimide resin. Polyimide fasteners or Vespel fasteners offer a unique balance of mechanical, thermal, and chemical properties for outstanding performance in a variety of demanding applications such as automotive, machinery, industrial equipment, aerospace, and semiconductor equipment.
Polyimide fasteners or Vespel fasteners also have the unique combination of properties such as excellent mechanical strength and toughness, exceptional radiation resistance, robust chemical resistance to many solvents, a low coefficient of thermal expansion, excellent creep resistance and flame retardance.
Polyimide fasteners or Vespel fasteners are available in both metric and standard sizes. Contact us to learn more about polyimide fasteners or Vespel® fasteners properties and availability.
Vespel Properties
| Property | ASTM or UL Test | Vespel® Polyimide |
|---|---|---|
| PHYSICAL | ||
| Density (lb/in³) (g/cm³) | D792 | 0.051 (1.43) |
| Water Absorption, 24 hrs (%) | D570 | 0.24 |
| MECHANICAL | ||
| Strength/Weight Ratio | Tensile Strength / Density (g/cc) | 8700 |
| Tensile Strength (psi) | D638 | 12,500 |
| Tensile Modulus (psi) | D638 | 450,000 |
| Tensile Elongation at Break (%) | D638 | 7.5 |
| Flexural Strength (psi) | D790 | 16,000 |
| Flexural Modulus (psi) | D790 | 450,000 |
| Hardness, Rockwell, R/M Scale | D785 | M90 |
| IZOD Impact Notched (ft-lb/in) | D256 | 0.8 |
| THERMAL | ||
| Coefficient of Linear Thermal Expansion (x 10-5 in./in./°F) | D696 | 3 |
| Heat Deflection Temp (°F / °C) at 264 psi | D648 | 680 / 360 |
| Melting Temp (°F / °C) | D3418 | none (degrades ~500 °C) |
| Max Operating Temp (°F / °C) | - | 572 / 300 |
| Thermal Conductivity (BTU-in/ft²-hr-°F) | C177 | 2.0 |
| Flammability Rating | UL94 | V-0 |
| ELECTRICAL | ||
| Dielectric Strength (V/mil) short time, 1/8" thick | D149 | 560 |
| Dielectric Constant at 1 MHz | D150 | 3.55 |
| Dissipation Factor at 1 MHz | D150 | 0.0034 |
| Volume Resistivity (ohm-cm) at 50% RH | D257 | >1014 |
| APPROVALS | ||
| Approval | FDA | NO |
| Approval | USDA | NO |
| Approval | NSF | NO |
| Approval | 3A DAIRY | NO |
| Approval | USP CLASS VI | NO |
Vespel Mechanical Data
| Temperature (°F) | Ultimate Tensile (ksi) |
|---|---|
| Room Temp. | 12.5 |
| 500 | 6.0 |
| Chemical Media | Temperature °C | Time (Hours) | % Tensile Strength Retained (SP1) |
|---|---|---|---|
| Organic Solvents | |||
| M-Cresol | 200 | 1,000 | 75 |
| o-Dichlorobenzene | 180 | 1,000 | 100 |
| Diethyl Ketone | 100 | 1,900 | 100 |
| Ethanol | 100 | 1,900 | 100 |
| Nitrobenzene | 215 | 1,000 | 85 |
| Perchloroethylene | 100 | 1,900 | 100 |
| Toluene | 100 | 1,900 | 85 |
| Industrial Fluids | |||
| Hydraulic Fluid (Skydrol) Polyphosphate Ester | 120 | 1,000 | 100 |
| JP-4 Jet Fuel | 100 | 1,900 | 80 |
| Jet Engine Oils (MIL L 7807G) | 260 260 | 600 1,000 | 60 (90) 30 (60) |
| Mineral Oil | 200 | 1,000 | 70 (90) |
| Silicone Fluid | 260 | 1,000 | 80 |
| Tricresyl Phosphate (oil additive) | 260 | 1,000 | 80 |
| Acids | |||
| Acetic 15% | 100 | 1,900 | 20 |
| Hydrochloric 38% | 23 | 120 | 70 |
| Hydrochloric 5% | 100 | 1,900 | 15 |
| Nitric 70% | 23 | 120 | 40 |
| Bases | |||
| Sodium Hydroxide 5% | 23 | 120 | 55 |
| Oxidizing Agents | |||
| Nitrogen Tetroxide | 23 | 120 | 60 |
Vespel (Polyimide) fastener styles
Vespel Bolts
Vespel Nuts
Vespel Studs & Threaded Rods
Vespel Washers
Vespel - Frequently Asked Questions
Answers from our engineers, drawn from the Vespel (Polyimide) technical questions we're asked most.
We need a screw that is usable at 200C in air only, so no chemical resistance needed. I like the high strength of the Carbon Fiber PEKK or PEEK Extreme. Will these work?A
Would recommend using either Glass filled PEEKor Vespel. Vespel screws are made from the highest temperature polymer available. Vespel has a usable limit of 300°C (572°F) in continuous heat and 500°C (932°F) intermittent.
I’m working with a process that requires a constant operating temperature of 450F. Do I need to use a metal screw or is there a polymer that can handle this?
There are definitely polymers that can handle an environment of 450F. One option is a PEEK fastener. PEEK screws retains its strength to 500F. It is also thermal degradation resistant, meaning that it is resistant to chemical decomposition caused by heat. If you need more heat resistance you could look at Vespel screws. Vespel screw are the best for high temperature heat resistance and will be able to withstand temperatures up to 570F (300C). However keep in mind Vespel screws are very expensive compared to PEEK.
Need help with specific needs regarding Polyimide fasteners and their high temperature capabilities
This Italian company was developing a new client oven. They were interested in Polyimide fasteners and their high temperature capabilities. In particular they needed:
- Usability to 300°C - Capability with metal connections - Heat and electric insulation - Used in a hot box of steel
Polyimide materials like Vespel fasteners are a good thermal and electrical insulator for this application. It is heat resistant to 300°C (572°F) continuous use and 500°C (932°F) intermittent. Vespel fasteners also has a 3.55 dielectric constant at 1MHz. The only drawback for using Vespel fasteners is that it is an expensive option. Here is a great video by DuPont on the heat resistance of polyimide compared to other polymers: http://www.dupont.com/products-and-services/plastics-polymers-resins/parts-shapes/videos/polyimide-heat-resistance-vespel.html
Need to replace a standard steel washer with a non-conductive material.
After speaking with this customer, I learned that he needed to replace a standard steel washer with a non-conductive material for a critical bolted joint. These washers needed to withstand 70°C temperatures while maintaining preload. He had been experiencing creep with non-metal washers at elevated temperatures and needed to minimize this issue.
While Vespel (polyimide) fasteners may have superb creep properties, it may be overkill for your application. Vespel is also <u very</u expensive. I think you may be better off considering PEEK fasteners. It is much more affordable that Vespel fasteners and could hold up to the 70C temperatures easily. It is also very well known for excellent creep resistance (as well as chemical resistance and temperature resistance). To further improve the creep resistance, glass and carbon fibers can be added. Glass fiber and carbon fiber will improve stiffness and creep resistance.
Polyimide / Vespel fasteners and their high temperature capabilities
This client is developing a new oven application and was interested in Polyimide fasteners and their high temperature capabilities. In particular they needed:
- Usability to 300 ° C - Capability with metal connections - Heat and electric insolation - Used in a hot box of steel
Polyimide or Vespel fasteners are a good thermal and electrical isolator for your application. It is heat resistant to 300°C (572°F) continuous use and 500°C (932°F) intermittent. I also has a 3.55 dielectric constant at 1MHz. The only drawback for using polyimide is that it is an expensive option.
Here is a great video by DuPont on the heat resistance of polyimide compared to other polymers: http://www.dupont.com/products-and-services/plastics-polymers-resins/parts-shapes/videos/polyimide-heat-resistance-vespel.html
What our customers say
More customer feedback“I purchased from you specifically because of Jon’s expertise and professionalism.”
“Very impressed; good prices and delivered earlier than lead time given, which was a real bonus.”
“Extreme Bolt is definitely on my go-to list.”













