Skip to main content
Extreme Bolt & Fastener
Quote

Polyimide / Vespel Flat Head Screws

Last updated

The ultimate temperature resistant polymer

Need help choosing a material?

Flat Head

Polyimide or Vespel® flat head screws are made from an advanced temperature resistant polyimide resin. Vespel flat head screws offer a unique balance of mechanical, thermal, and chemical properties for outstanding performance in a variety of demanding applications such as automotive, machinery, industrial equipment, aerospace, and semiconductor equipment.

Polyimide or Vespel screws also have the unique combination of properties such as excellent mechanical strength and toughness, exceptional radiation resistance, robust chemical resistance to many solvents, a low coefficient of thermal expansion, excellent creep resistance and flame retardance.

Vespel flat head screws are available in both metric and standard sizes. Contact us to learn more about polyimide screws or Vespel screws properties and availability.

Screw Types: Flat Head Screws, Hex Cap Screws, Pan Head Screws, Set Screws, Socket Head Cap Screws


Vespel Flat Head Screw Features and Benefits

Vespel flat head screws are characterized by having a head with a top flat surface (which can feature either a slotted, phillips or allen driver) and bottom that is cone shaped or countersunk. With this design, the head of the screw can align flush or below the surrounding surface having obvious benefits.

Vespel Slotted vs. Phillips Driver 

 Slotted Head Advantages Phillips Head Advantages 
  • Slotted head screws tend to strip less than Philips, especially in harsh environments
  • Slotted heads are typically better in applications where it's going to be unscrewed and re-done periodically, as the head tends to wear less.

  • In dirty environments, a flat head is much easier to clean out

  • Phillips head offers a much stronger joint since it can tolerate more torque.

Countersink Angle

For most flat head screw designs the angle of countersink is usually 82° for UNC and UNF applications however other angles ranging from 60° -120° could be specified. 

Thread Type Normal Flat Head Countersink Angle

UNC / UNF

82°

Aerospace 100°
ISO Metric / Imperial 90°

 

Vespel Properties

     

POLYIMIDE / VESPEL PROPERTIES
PropertyASTM or UL TestVespel®
Polyimide
PHYSICAL
Density (lb/in³)
(g/cm³)
D7920.051
(1.43)
Water Absorption, 24 hrs (%)D5700.24
MECHANICAL
Strength/Weight RatioTensile Strength / Density (g/cc)8700
Tensile Strength (psi)D63812,500
Tensile Modulus (psi)D638450,000
Tensile Elongation at Break (%)D6387.5
Flexural Strength (psi)D79016,000
Flexural Modulus (psi)D790450,000
Hardness, Rockwell, R/M ScaleD785M90
IZOD Impact Notched (ft-lb/in)D2560.8
THERMAL
Coefficient of Linear Thermal Expansion (x 10-5 in./in./°F)D6963
Heat Deflection Temp (°F / °C) at 264 psiD648680 / 360
Melting Temp (°F / °C)D3418none (degrades ~500 °C)
Max Operating Temp (°F / °C)-572 / 300
Thermal Conductivity (BTU-in/ft²-hr-°F)C1772.0
Flammability RatingUL94V-0
ELECTRICAL
Dielectric Strength (V/mil) short time, 1/8" thickD149560
Dielectric Constant at 1 MHzD1503.55
Dissipation Factor at 1 MHzD1500.0034
Volume Resistivity (ohm-cm) at 50% RHD257>1014
APPROVALS
ApprovalFDANO
ApprovalUSDANO
ApprovalNSFNO
Approval3A DAIRYNO
ApprovalUSP CLASS VINO

Vespel Mechanical Data

VESPEL - Tensile Data
Temperature
(°F)
Ultimate Tensile
(ksi)
Room Temp.12.5
5006.0

Chemical Resistant Vespel screws

VESPEL CORRSION DATA
Chemical
Media
Temperature
°C
Time
(Hours)
% Tensile Strength
Retained (SP1)
Organic Solvents
M-Cresol2001,00075
o-Dichlorobenzene1801,000100
Diethyl Ketone1001,900100
Ethanol1001,900100
Nitrobenzene2151,00085
Perchloroethylene1001,900100
Toluene1001,90085
Industrial Fluids
Hydraulic Fluid (Skydrol) Polyphosphate Ester1201,000100
JP-4 Jet Fuel1001,90080
Jet Engine Oils (MIL L 7807G)260 260600 1,00060 (90)
30 (60)
Mineral Oil2001,00070 (90)
Silicone Fluid2601,00080
Tricresyl Phosphate (oil additive)2601,00080
Acids
Acetic 15%1001,90020
Hydrochloric 38%2312070
Hydrochloric 5%1001,90015
Nitric 70%2312040
Bases
Sodium Hydroxide 5%2312055
Oxidizing Agents
Nitrogen Tetroxide2312060

More Vespel (Polyimide) products

Questions?

Our material experts are ready to help guide you through your specific application.