Skip to main content
Extreme Bolt & Fastener
Quote

Torlon (PAI) Fasteners - Bolts, Screws & Nuts

Last updated

Metal-like performance from a light weight plastic

Need help choosing a material?

PAI Torlon Upsplash Free Laboratory
  • Exceptional strength and stiffness up to 275°C (525°F)
  • Outstanding wear resistance
  • Superior toughness from cryogenic up to 275°C
  • Resistant to strong acids and most organics
  • Inherent flame resistance
  • Metal-like coefficient of linear thermal expansion
  • Custom injection molded & machined parts
  • PAI / Torlon material datasheet

Polyamide-imide fasteners or Torlon® fasteners are one of the strongest and toughest polymer fasteners available. Having the highest strength and stiffness of any pure thermoplastic up to 275°C (525°F), Torlon fasteners are geared for the most demanding mechanical and high temperature applications. Torlon fasteners also have outstanding resistance to wear, creep and most chemicals.

Torlon fasteners are available in a glass fiber reinforced grade which improves the strength, modulus and creep resistance. Because of the outstanding mechanical properties Torlon® fasteners they can be used as a replacement for metal fasteners in some applications

Torlon fasteners are available in both metric and standard sizes. Please contact us if you have any questions about Torlon fasteners, their characteristics and their availability.

Fasteners made from customer specified polyamide-imide grades are available upon request.


Torlon Properties     

TORLON PROPERTIES
PropertyASTM / UL
Test
Torlon®
PAI 4203
PHYSICAL
Density (lb/in³)
(g/cm³)
D7920.051
(1.41)
Water Absorption, 24 hrs (%)D5700.33
MECHANICAL
Strength/Weight RatioTensile Strength /15600
Tensile Strength (psi)D63822,000
Tensile Modulus (psi)D638650,000
Tensile Elongation at Break (%)D6387.6
Flexural Strength (psi)D79041,000
Flexural Modulus (psi)D7901,140,000
Hardness, Rockwell, R/M ScaleD785M120
IZOD Impact Notched (ft-lb/in)D2562.7
THERMAL
Coefficient of Linear Thermal Expansion (x 10-5 in./in./°F)D6963.1
Heat Deflection Temp (°F / °C) at 264 psiD648532 / 278
Melting Temp (°F / °C)D3418none (degrades ~500 °C
Max Operating Temp (°F / °C)-525/ 275
Thermal Conductivity (BTU-in/ft²-hr-°F)C1771.8
ELECTRICAL
Dielectric Strength (V/mil) short time, 1/8" thickD149580
Dielectric Constant at 1 MHzD1503.9
Dissipation Factor at 1 MHzD1500.026
Volume Resistivity (ohm-cm) at 50% RHD257> 1016
APPROVALS
ApprovalFDANO
ApprovalUSDANO
ApprovalNSFNO
Approval3A DAIRYNO
ApprovalUSP CLASS VINO

Torlon Mechanical Properties

TORLON - Tensile Data@ Room Temperature
MaterialUltimate Tensile
(psi)
Yield Strength
(psi)
Torlon Unfilled22,000-

Chemical Resistance of Torlon

TORLON CHEMICAL RESISTANCE

TORLON CHEMICAL RESISTANCE (1 of 2)
ChemicalTensile Strength
% Retained
Acids
Acetic (10%)100
Glacial Acetic100
Acetic Anhydride`100
Lactic100
Benzene Sulfonic28
Chromic (10%)100
Formic (88%)66
Hydrochloric (10%)100
Hydrochloric (37%)95
Phosphoric (35%)100
Sulfuric (30%)100
Bases
Ammonium Hydroxide (28%)81
Sodium Hydroxide (15%)43
Sodium Hydroxide (30%)7
Aqueous Solutions (10%)
Aluminum Sulfate100
Ammonium Chloride100
Ammonium Nitrate98
Barium Chloride100
Bromin
(saturated solution, 120 °F)
100
Calcium Chloride100
Calcium Nitrate96
Ferric Chloride99
Magnesium Chloride100
Potassium Permanganate100
Silver Chloride100
Sodium Bicarbonate100
Sodium Carbonate100
Sodium Chloride100
Sodium Chromate100
Sodium Hypochlorite100
Sodium Sulfate100
Sodium Sulfide100
Sodium Sultite100
Alcohols
2-Aminoethanol9
n-Amyl Alcohol100
n-Butyl Alcohol100
Cyclohexanol100
Ethylene Glycol100
Amines
Aniline97
n-Butyl Amine100
Dimethylaniline100
Thylene Diamine7
Morpholine100
Pyridine43
TORLON CHEMICAL RESISTANCE (2 of 2)
ChemicalTensile Strength
% Retained
Aldehydes & Ketones
Acetophenone100
Benzaldehyde100
Cyclohexanone100
Formaldehyde (37%)100
Furfural84
Methyl Ethyl Ketone100
Chlorinated Organics100
Acetyl Chloride (120 °F)100
Benzyl Chloride (120 °F)100
Carbon Tetrachloride100
Chlorobenzene100
2-Chloroethanol100
Chloroform (120 °F)100
Epichloroydrin100
Ethylene Chloride100
Esters
Amyl Acetate100
Butyl Acetate100
Butyl Phihalate100
Ethyl Acetate100
Ethers
Butyl Ether100
Cellosolve100
P-Dioxane (120 °F)100
Tetrahydroturan100
Hydrocarbons
Cyclohexane100
Diesel fuel99
Gasoline (120 °F)100
Heptane100
Mineral Oil100
Motor Oil100
Stoddard Solvent100
Toluene100
Nitriles
Acetonitrile100
Benzonitrile100
Nitro Compounds
Nitrobenzene100
Nitromethane100
Miscellaneous
Cresyldiphenyl Phosphate100
Sulfolane100
Triphenylphosphite100
 

Torlon (PAI) fastener styles

Torlon (PAI) Bolts

Torlon (PAI) Nuts

Torlon (PAI) Studs & Threaded Rods

Torlon (PAI) Washers

Torlon (PAI) - Frequently Asked Questions

Answers from our engineers, drawn from the Torlon (PAI) technical questions we're asked most.

I’m looking for polymer that can withstand around 400F for a high temperature sterilization process in a pharmaceutical application. In addition, I also need the polymer to meet FDA and USDA purity standards. Is this possible with Torlon screws.

Torlon screws are a good high temperature polymer that are usable to 525F. They are known for flame resistance, as well as metal-like coefficient of linear thermal expansion. The issue with Torlon in your situation is that it does not meet USDA or FDA purity standards. So it probably won’t be a good fit.

Here I would suggest using a PEEK screw. PEEK is usable to 500F and is approved for use by the FDA, USDA and 3A Dairy. In addition, medical grades of PEEK screws are also available. This would probably be a better fit for you.

I’m looking for a polymer washer that can be used as a dielectric break between aluminum and titanium. It will also be exposed to salt water. Is torlon a good choice?

Torlon washers will work in this situation, but there are probably more cost efficient solution for this kind of application. Torlon is amazing polymer but really shines in high temperature applications. Another polymer worth considering is PEEK, as it is non-conductive, chemically resistant, and does not absorb water. PEEK fastenersare also a fraction of the price compared to Torlon, so unless you need a polymer to survive at high temperatures (250C-300C) then PEEK is probably a better option.

I have an application where I need a non-metal fastener because of insulation and magnetic issues. The problem is that it also needs to be able to retain strength at about 520°F. Should I use a ceramic?

Ceramic fasteners are definitely not necessary at these temperatures, although they would work from a temperature point of view. Usually ceramics are for extreme temperatures over 1500°F. For your situation, I would suggest Torlon polymer fasteners. They offer 22,000psi of tensile strength which is almost that of glass fiber reinforced PEEK, and they retain there strength to about 525°F. In addition, because they are a polymer, not metal, they have good insulating properties and are non-magnetic.

What our customers say

More customer feedback
“I purchased from you specifically because of Jon’s expertise and professionalism.”
“Very impressed; good prices and delivered earlier than lead time given, which was a real bonus.”
“Extreme Bolt is definitely on my go-to list.”

Questions?

Our material experts are ready to help guide you through your specific application.