PFA Fasteners - Bolts, Screws & Nuts
Last updated
Outstanding chemical resistance at elevated temperatures
Need help choosing a material?
- Virtually inert to most organics, acids and bases
- Usable up to 260°C / 500°F and tougher than PTFE
- Excellent electrical insulator
- High purity for sensitive pharmaceutical and food type applications
- Custom injection molded & machined parts
- PFA material datasheet
PFA fasteners made from perfluoroalkoxy alkanes (PFAs) are fluoropolymers with properties similar to polytetrafluoroethylene (PTFE). PFA's are known for being exceptionally corrosion resistant and inert at elevated temperatures. PFA fasteners are inert to most chemical environments including organics, acids, bases, mixed chemicals and hyrdofluoric acid. Additionally PFA fasteners are bio-inert and will not leach into or contaminate sensitive pharmaceuticals or food based products.
Compared to other high performance polymer fasteners like PEEK or PVDF, PFA fasteners offer the best all-around corrosion resistance especially at elevated temperatures. However the trade-off for its extraordinary corrosion resistance is its lower tensile strength compared to PVDF or PEEK fasteners.
| Temperature (°F) | Ultimate Tensile (ksi) | Yield Strength 0.2% Offset (ksi) | Elongation % |
|---|---|---|---|
| Room Temp. | 3.6 | 2.0 | 300 |
| 480 | 2.0 | - | 480 |
| Property | ASTM or UL Test | Teflon® PFA |
|---|---|---|
| PHYSICAL | ||
| Density (lb/in³) (g/cm³) | D792 | 0.077 (2.14) |
| Water Absorption, 24 hrs (%) | D570 | <0.03 |
| MECHANICAL | ||
| Strength/Weight Ratio | Tensile Strength / Density (g/cc) | 1700 |
| Tensile Strength (psi) | D638 | 3,600 |
| Tensile Modulus (psi) | D638 | 80,000 |
| Tensile Elongation at Break (%) | D638 | 330 |
| Flexural Strength (psi) | D790 | No Break |
| Flexural Modulus (psi) | D790 | 85,000 |
| Hardness, Rockwell, R/M Scale | D785 | R55 |
| IZOD Impact Notched (ft-lb/in) | D256 | No Break |
| THERMAL | ||
| Coefficient of Linear Thermal Expansion (x 10-5 in./in./°F) | D696 | 7.8 |
| Heat Deflection Temp (°F / °C) at 264 psi | D648 | 163 / 73 |
| Melting Temp (°F / °C) | D3418 | 575 / 302 |
| Max Operating Temp (°F / °C) | - | 500 / 260 |
| Thermal Conductivity (BTU-in/ft²-hr-°F) | C177 | 1.4 |
| Flammability Rating | UL94 | V-O |
| ELECTRICAL | ||
| Dielectric Strength (V/mil) short time, 1/8" thick | D149 | 6500 |
| Dielectric Constant at 1 MHz | D150 | 2.03 |
| Dissipation Factor at 1 MHz | D150 | 0.0001 |
| Volume Resistivity (ohm-cm) at 50% RH | D257 | > 10¹⁸ |
| APPROVALS | ||
| Approval | FDA | YES |
| Approval | USDA | NO |
| Approval | NSF | NO |
| Approval | 3A DAIRY | NO |
| Approval | USP CLASS VI | Medical Grades Available |
PFA fastener styles
PFA Bolts
PFA Nuts
PFA Studs & Threaded Rods
PFA Washers
What our customers say
More customer feedback“I purchased from you specifically because of Jon’s expertise and professionalism.”
“Very impressed; good prices and delivered earlier than lead time given, which was a real bonus.”
“Extreme Bolt is definitely on my go-to list.”













