Skip to main content
Extreme Bolt & Fastener
Quote

Zirconia Ceramic Fasteners - Bolts, Screws & Nuts

Last updated

A superb combination of corrosion resistance, temperature stability and non-conductivity

Need help choosing a material?

Zirconia Upsplash Free Laboratory

Zirconia ceramic fasteners are the most thermally resistant fasteners available. Due to their outstanding thermal resiustance, zirconia ceramic fasteners are geared for the most demanding high temperature applications. Zirconia ceramic fasteners also have outstanding corrosion resistance and are highly chemically resistant to acids, solvents, and salts. Additionally, zirconia ceramic fasteners find many uses in high voltage applications due to their non-conductive electrical properties.

Zirconia ceramic fasteners are available in both metric and standard sizes. Please contact us if you have any questions about the properties or availability of our ceramic fasteners.

Fasteners made from customer specified ceramic grades or custom dimensions are available upon request.


Common Ceramic Grades

Zirconia YSZ

Zirconia ceramic or Zirconium Oxide (ZrO2) is one of the most temperture stable materials available having a usable temperature range up to 3812°F (2100°C) and melting point at 4900°F (2700°C). This material is stabelized with yittria to prevent cracking and therefore designated as Yittria Stabilized Zirconia (YSZ). This grade is stronger, tougher and more thermally resistant than alumina. 

Other grades are available upon request.


Alumina and Zirconia Properties

CERAMIC PROPERTIES
PropertyASTM or UL TestAluminaZirconia
PHYSICAL
Density (lb/in³)
(g/cm³)
D7920.141
(3.89)
0.220
(6.1)
Water Absorption, 24 hrs (%)D57000
MECHANICAL
Strength/Weight RatioTensile Strength / Density (g/cc)770012300
Tensile Strength (psi)D63830,00075,000
Tensile Modulus (psi)D63843,500,00030,000,000
Tensile Elongation at Break (%)D6380-
Flexural Strength (psi)D79055,000100,000
Flexural Modulus (psi)D79054,000,000-
Hardness, Rockwell, R/M ScaleD785A88A80
IZOD Impact Notched (ft-lb/in)D256--
THERMAL
Coefficient of Linear Thermal Expansion (x 10-5 in./in./°F)D6960.50.6
Heat Deflection Temp (°F / °C) at 264 psiD648nonenone
Melting Temp (°F / °C)D3418--
Max Operating Temp (°F / °C)-3000/16504350/2400
Thermal Conductivity (BTU-in/ft²-hr-°F)C177242.015.0
Flammability RatingUL94non-flammablenon-flammable
ELECTRICAL
Dielectric Strength (V/mil) short time, 1/8" thickD14923050
Dielectric Constant at 1 MHzD1501028
Dissipation Factor at 1 MHzD1500-
Volume Resistivity (ohm-cm) at 50% RHD2571x1014> 1012
APPROVALS
ApprovalFDAYES-
ApprovalUSDANO-
ApprovalNSFNO-
Approval3A DAIRYNO-
ApprovalUSP CLASS VIMedical Grades Available-

Corrosion Resistance of Common Ceramics

Zirconia (YSZ) fastener styles

Zirconia Ceramic Bolts

Zirconia Ceramic Nuts

Zirconia Ceramic Studs & Threaded Rods

Zirconia Ceramic Washers

Zirconia Ceramic - Frequently Asked Questions

Answers from our engineers, drawn from the Zirconia (YSZ) technical questions we're asked most.

Hi, I’m search to get a 1/4″-20 x 3ft long alumina ceramic rod. Is this something you can make?

For Extreme Bolt & Fastener, 3″ long is the max length we can produce a ceramic bolt, rod or other fastener. As you may know ceramics are brittle, but breakage isn’t the real barrier in creating a ceramic fastener in a longer length.

The real issue is that these parts are molded/fired. Each part must have tooling to make the part to a specific length – tooling is quite costly – often thousands of dollars. We do not have tooling for any rods longer than 3″. Additionally, long lengths of “green” ceramics do not want to stay straight when fired. They will have the propensity to bend and warp. The process is not good for long parts.

Do ceramic fasteners provide strength?

The answer to your question is both yes and no. They provide decent tensile strength similar to some stainless steels(Aluminia bolts has a tensile strength of 30 ksi and Zirconia screws 75 ksi), however they don’t have any yield strength. Due to the fact that they are brittle and lack yield strength, they are susceptible to cracking and fracturing under varying conditions.

I am looking for recommendations for fasteners capable of operating under load at 2000C, in a mild vacuum environment. The material can be conductive or insulating just along as it does not react with carbon.

For temperatures as high as 2000C, Zirconia ceramic fastenerswould be your only option. Zirconia is usable to 2100C. This material will also be non-reactive. Otherwise you would have to have no oxygen present in your atmosphere. If that is the case you may consider tantalum metal fasteners. They are non-reactive but can only be used in an oxygen-free vacuum a those temperatures.

We are looking for a non-conductive screw with lower dielectric constant / dissipation factor to replace a steel screw (Tensile Strength 70kpsi) in one of our products. So were trying to get to similar strength / properties to the steel screw to meet our torque requirements. Will a ceramic screw be a work?

Any polymer or ceramic will have a lower dielectric constant than steel. The question is what other properties do you need. Ceramics will certainly work for an electrically insulating point of view but will be very expensive and brittle. Depending on your application this option has to be evaluated carefully.

Generally speaking a good material to consider would be a PEEK Glass filled material. The carbon filed is electrically conductive so that probably will not work for your application. Glass filled PEEK screws are tough, strong and non-conductive. It will not be as strong as your steel fasteners, having a tensile around 28-30ksi, but if your application could accept that it would be a good choice.

How do ceramic alumina screws compare to steel screws as far as strength goes? The load would most likely be tension, but some compression too.

If you compare 316 Stainless Steel to Zirconia ceramic screws, their tensile strengths are similar (around 75 ksi tensile) with Alumina ceramics being about 1/2 as strong. So you certainly can match the strength of 316 stainless steel with zirconia ceramics in constant compression or tension. However the ceramic screwswill be much more brittle and susceptible to shock so care must be taken in the application.

I’m looking for a socket head cap screw that is 5/8″-11 x 5.5 inches in length. Need the material to be non-conductive and was thinking Ceramic Zirconia? Would that work?

Ceramics like Zirconia screws are in fact an excellent insulator from electrical current. However zirconia ceramic fasteners are very limited to smaller sizes between 2 – 1/4″ (M2-M6). Beyond this size they become very difficult to manufacture and are subject cracking. If electrical insulation is what you need, I would suggest a high performance polymer like PEEK socket head cap screws. PEEK is very economical compared to ceramics, an excellent electric insulator and can be made to just about any size. In addition, PEEK is tough, it will not be as fragile as a ceramic while offering the benefits of corrosion resistance and strength.

What our customers say

More customer feedback
“I purchased from you specifically because of Jon’s expertise and professionalism.”
“Very impressed; good prices and delivered earlier than lead time given, which was a real bonus.”
“Extreme Bolt is definitely on my go-to list.”

Questions?

Our material experts are ready to help guide you through your specific application.