Skip to main content
Extreme Bolt & Fastener
Quote

PVDF Set Screws / Kynar Set Screws

Last updated

Exceptional purity and chemical resistance with moderate strength

Need help choosing a material?

set screw s
  • High Purity and low extractables
  • Chemically resistant to most common solvents including acids, salts, oils and steam
  • Mechanical strength and toughness to 150°C (300°F)
  • Resistance to ultraviolet, nuclear radiation, and standard sterilization methods
  • Resistance to weathering and fungi
  • Material datasheet for PVDF
  • PVDF set screw features and benefits

PVDF set screws / Kynar® set screws are made from a tough engineered fluoro-thermoplastic that offers a unique balance of excellent chemical resistance and good strength properties.

PVDF set screws have the characteristic stability of fluoropolymers when exposed to harsh chemical and ultraviolet environments but are much stronger mechanically than PTFE or PFA polymers.  PVDF screws also excel in high purity and low-permeability applications such as pharmaceutical and semi-conductor processing.

PVDF set screws are available in most metric and standard sizes. See our online store (top right) for common sizes or contact us for your specific requirements.

Screw Types: Flat Head Screws, Hex Cap Screws, Pan Head Screws, Set Screws, Socket Head Cap Screws


PVDF Set Screw Features & Benefits

PVDF set screws are unique in that they have no screw head, meaning that they have no protruding part past the threaded shaft. They are thread only and are available with a socket or slotted driver insert at one end. Set screws are used to secure an object within or against another object. Typically they secure a rotating part such as a gear or shaft. PVDF set screws are driven through a threaded hole in the rotating part until it is tight against the inner object, preventing from moving relative to the outer object. Set screws are available with various points depending on the application.

cup point

Cup Point

This is the most commonly used set screw and is identified by a cup-shaped indentation on one end. PVDF cup points are typically used for a quick, semi-permanent or permanent applications where it is acceptable to cut the cup point edge of the screw.

Cone Pointcone point
A cone point is easily identifiable by its sharp cone-shaped point – just like an ice cream cone. PVDF cone point set screws deliver the strongest clamping force due to the deep penetration of the point. As a result they are used for permanent assembly.

flat point set

Flat Point

The cheapest and simplest of the set screw point styles, this screw has a flat surface on the bottom of the screw. This type is used when you need the ability to frequently change parts and require minimal shaft deformation.

 


PVDF Mechanical  & Physical Properties

PVDF / KYNAR PROPERTIES
PropertyASTM / UL
Test
Kynar®
PVDF
PHYSICAL
Density (lb/in³)
(g/cm³)
D7920.064
(1.77)
Water Absorption, 24 hrs (%)D5700.03
MECHANICAL
Strength/Weight RatioTensile Strength /4000
Tensile Strength (psi)D6387,000
Tensile Modulus (psi)D638290,000
Tensile Elongation at Break (%)D63850
Flexural Strength (psi)D7909,700
Flexural Modulus (psi)D790290,000
Hardness, Rockwell, R/M ScaleD785R80
IZOD Impact Notched (ft-lb/in)D2563
THERMAL
Coefficient of Linear Thermal Expansion (x 10-5 in./in./°F)D6966.6
Heat Deflection Temp (°F / °C) at 264 psiD648230 / 110
Melting Temp (°F / °C)D3418332 / 166
Max Operating Temp (°F / °C)-300/ 150
Thermal Conductivity (BTU-in/ft²-hr-°F)C1771.2
ELECTRICAL
Dielectric Strength (V/mil) short time, 1/8" thickD1491700
Dielectric Constant at 1 MHzD1508.5
Dissipation Factor at 1 MHzD1500.015
Volume Resistivity (ohm-cm) at 50% RHD2572x1014
APPROVALS
ApprovalFDAYES
ApprovalUSDAYES
ApprovalNSFYES
Approval3A DAIRYYES
ApprovalUSP CLASS VIYES
PVDF Strength Data
Ultimate Tensile (ksi)Yield Strength (ksi)
6.5 - 8.05.0 - 8.0
*Measured at room temperature

PVDF Chemcial Resistance Compared to Other Polymers

PVDF Chemical Resistance 


Questions?

Our material experts are ready to help guide you through your specific application.