Skip to main content
Extreme Bolt & Fastener
Quote

PVDF Flat Head Screws

Last updated

Exceptional purity and chemical resistance with moderate strength

Need help choosing a material?

Flat Head
  • High Purity and low extractables
  • Chemically resistant to most common solvents including acids, salts, oils and steam
  • Mechanical strength and toughness to 150°C (300°F)
  • Resistance to ultraviolet, nuclear radiation, and standard sterilization methods
  • Resistance to weathering and fungi
  • Material datasheet for PVDF
  • PVDF flat head screw features and benefits

PVDF / Kynar® flat head screws are made from a tough engineered fluoro-thermoplastic that offers a unique balance of excellent chemical resistance and good strength properties.

PVDF flat head screws have the characteristic stability of fluoropolymers when exposed to harsh chemical and ultraviolet environments but are much stronger mechanically than PTFE or PFA polymers.  PVDF screws also excel in high purity and low-permeability applications such as pharmaceutical and semi-conductor processing.

PVDF flat head screws are available in most metric and standard sizes. See our online store (top right) for common sizes or contact us for your specific requirements.

Screw Types: Flat Head Screws, Hex Cap Screws, Pan Head Screws, Set Screws, Socket Head Cap Screws


PVDF Flat Head Screw Features and Benefits

PVDF flat head screws are characterized by having a head with a top flat surface (which can feature either a slotted, phillips or allen driver) and bottom that is cone shaped or countersunk. With this design, the head of the screw can align flush or below the surrounding surface having obvious benefits.

PVDF Slotted vs. Phillips Driver 

 Slotted Head Advantages Phillips Head Advantages 
  • Slotted head screws tend to strip less than Philips, especially in harsh environments
  • Slotted heads are typically better in applications where it's going to be unscrewed and re-done periodically, as the head tends to wear less.

  • In dirty environments, a flat head is much easier to clean out

  • Phillips head offers a much stronger joint since it can tolerate more torque.

Countersink Angle

For most flat head screw designs the angle of countersink is usually 82° for UNC and UNF applications however other angles ranging from 60° -120° could be specified. 

Thread Type Normal Flat Head Countersink Angle

UNC / UNF

82°

Aerospace 100°
ISO Metric / Imperial 90°

PVDF Mechanical  & Physical Properties

PVDF / KYNAR PROPERTIES
PropertyASTM / UL
Test
Kynar®
PVDF
PHYSICAL
Density (lb/in³)
(g/cm³)
D7920.064
(1.77)
Water Absorption, 24 hrs (%)D5700.03
MECHANICAL
Strength/Weight RatioTensile Strength /4000
Tensile Strength (psi)D6387,000
Tensile Modulus (psi)D638290,000
Tensile Elongation at Break (%)D63850
Flexural Strength (psi)D7909,700
Flexural Modulus (psi)D790290,000
Hardness, Rockwell, R/M ScaleD785R80
IZOD Impact Notched (ft-lb/in)D2563
THERMAL
Coefficient of Linear Thermal Expansion (x 10-5 in./in./°F)D6966.6
Heat Deflection Temp (°F / °C) at 264 psiD648230 / 110
Melting Temp (°F / °C)D3418332 / 166
Max Operating Temp (°F / °C)-300/ 150
Thermal Conductivity (BTU-in/ft²-hr-°F)C1771.2
ELECTRICAL
Dielectric Strength (V/mil) short time, 1/8" thickD1491700
Dielectric Constant at 1 MHzD1508.5
Dissipation Factor at 1 MHzD1500.015
Volume Resistivity (ohm-cm) at 50% RHD2572x1014
APPROVALS
ApprovalFDAYES
ApprovalUSDAYES
ApprovalNSFYES
Approval3A DAIRYYES
ApprovalUSP CLASS VIYES
PVDF Strength Data
Ultimate Tensile (ksi)Yield Strength (ksi)
6.5 - 8.05.0 - 8.0
*Measured at room temperature

PVDF Chemcial Resistance Compared to Other Polymers

PVDF Chemical Resistance 


Questions?

Our material experts are ready to help guide you through your specific application.