PTFE Threaded Rod
Last updated
Outstanding chemical resistance at elevated temperatures
Need help choosing a material?
- Virtually inert to most organics, acids and bases
- Usable up to 260°C / 500°F but weakens significantly
- Excellent electrical insulator
- High purity for sensitive pharmaceutical and food type applications
- PTFE material datasheet
PTFE threaded rods are made from the fluoropolymer polytetrafluoroethylene and are known for being exceptionally corrosion resistant and inert at elevated temperatures. PTFE threaded rods are inert to most chemical environments including organics, acids, bases, mixed chemicals and hyrdofluoric acid. Additionally PTFE threaded rods are bio-inert and will not leach into or contaminate sensitive pharmaceuticals or food based products.
Compared to other high performance polymer threaded rods like PEEK or PVDF, PTFE threaded rods offer the best all-around corrosion resistance especially at elevated temperatures. However the trade-off for its extraordinary corrosion resistance is the lower tensile strength compared to PVDF or PEEK threaded rods.
Mechanical Data
|

PTFE Properties
| Property | ASTM or UL Test | Teflon® PTFE |
|---|---|---|
| PHYSICAL | ||
| Density (lb/in³) (g/cm³) | D792 | 0.078 (2.2) |
| Water Absorption, 24 hrs (%) | D570 | < 0.01 |
| MECHANICAL | ||
| Strength/Weight Ratio | Tensile Strength / Density (g/cc) | 1800 |
| Tensile Strength (psi) | D638 | 3,900 |
| Tensile Modulus (psi) | D638 | 80,000 |
| Tensile Elongation at Break (%) | D638 | 300 |
| Flexural Strength (psi) | D790 | No Break |
| Flexural Modulus (psi) | D790 | 72,000 |
| Hardness, Rockwell, R/M Scale | D785 | R58 |
| IZOD Impact Notched (ft-lb/in) | D256 | 3.5 |
| THERMAL | ||
| Coefficient of Linear Thermal Expansion (x 10-5 in./in./°F) | D696 | 7.5 |
| Heat Deflection Temp (°F / °C) at 264 psi | D648 | 132 / 55 |
| Melting Temp (°F / °C) | D3418 | 635 / 335 |
| Max Operating Temp (°F / °C) | - | 500 / 260 |
| Thermal Conductivity (BTU-in/ft²-hr-°F) | C177 | 1.7 |
| Flammability Rating | UL94 | V-O |
| ELECTRICAL | ||
| Dielectric Strength (V/mil) short time, 1/8" thick | D149 | 600 |
| Dielectric Constant at 1 MHz | D150 | 2.1 |
| Dissipation Factor at 1 MHz | D150 | < 0.0002 |
| Volume Resistivity (ohm-cm) at 50% RH | D257 | > 10¹⁸ |
| APPROVALS | ||
| Approval | FDA | YES |
| Approval | USDA | NO |
| Approval | NSF | NO |
| Approval | 3A DAIRY | NO |
| Approval | USP CLASS VI | Medical Grades Available |


