Skip to main content
Extreme Bolt & Fastener
Quote

PFA Washers

Last updated

Outstanding chemical resistance at elevated temperatures

Need help choosing a material?

washer s
  • Virtually inert to most organics, acids and bases
  • Usable up to 260°C / 500°F and tougher than PTFE
  • Excellent electrical insulator
  • High purity for sensitive pharmaceutical and food type applications
  • PFA material datasheet

PFA washers made from perfluoroalkoxy alkanes (PFAs) are fluoropolymers with properties similar to polytetrafluoroethylene (PTFE). PFA's are known for being exceptionally corrosion resistant and inert at elevated temperatures. PFA washers are inert to most chemical environments including organics, acids, bases, mixed chemicals and hyrdofluoric acid. Additionally PFA washers are bio-inert and will not leach into or contaminate sensitive pharmaceuticals or food based products.

Compared to other high performance polymer washers like PEEK or PVDF, PFA washers offer the best all-around corrosion resistance especially at elevated temperatures. However the trade-off for its extraordinary corrosion resistance is its lower tensile strength compared to PVDF or PEEK washers.

Washer Types: Flat Washers


PFA - Tensile Data
Temperature
(°F)
Ultimate
Tensile (ksi)
Yield Strength
0.2% Offset
(ksi)
Elongation
%
Room Temp.3.62.0300
4802.0-480
PFA PROPERTIES
PropertyASTM or UL TestTeflon®
PFA
PHYSICAL
Density (lb/in³)
(g/cm³)
D7920.077
(2.14)
Water Absorption, 24 hrs (%)D570<0.03
MECHANICAL
Strength/Weight RatioTensile Strength / Density (g/cc)1700
Tensile Strength (psi)D6383,600
Tensile Modulus (psi)D63880,000
Tensile Elongation at Break (%)D638330
Flexural Strength (psi)D790No Break
Flexural Modulus (psi)D79085,000
Hardness, Rockwell, R/M ScaleD785R55
IZOD Impact Notched (ft-lb/in)D256No Break
THERMAL
Coefficient of Linear Thermal Expansion (x 10-5 in./in./°F)D6967.8
Heat Deflection Temp (°F / °C) at 264 psiD648163 / 73
Melting Temp (°F / °C)D3418575 / 302
Max Operating Temp (°F / °C)-500 / 260
Thermal Conductivity (BTU-in/ft²-hr-°F)C1771.4
Flammability RatingUL94V-O
ELECTRICAL
Dielectric Strength (V/mil) short time, 1/8" thickD1496500
Dielectric Constant at 1 MHzD1502.03
Dissipation Factor at 1 MHzD1500.0001
Volume Resistivity (ohm-cm) at 50% RHD257> 10¹⁸
APPROVALS
ApprovalFDAYES
ApprovalUSDANO
ApprovalNSFNO
Approval3A DAIRYNO
ApprovalUSP CLASS VIMedical Grades Available

Questions?

Our material experts are ready to help guide you through your specific application.