PFA Hex Head Bolts
Last updated
Outstanding chemical resistance at elevated temperatures
Need help choosing a material?
- Virtually inert to most organics, acids and bases
- Usable up to 260°C / 500°F and tougher than PTFE
- Excellent electrical insulator
- High purity for sensitive pharmaceutical and food type applications
- Material datasheet for PFA
- PFA hex head bolt features and benefits
PFA hex head bolts made from perfluoroalkoxy alkanes (PFAs) are fluoropolymers with properties similar to polytetrafluoroethylene (PTFE). PFA's are known for being exceptionally corrosion resistant and inert at elevated temperatures. PFA hex head bolts are inert to most chemical environments including organics, acids, bases, mixed chemicals and hyrdofluoric acid. Additionally PFA bolts are bio-inert and will not leach into or contaminate sensitive pharmaceuticals or food based products.
Compared to other high performance polymer bolts like PEEK or PVDF, PFA hex head bolts offer the best all-around corrosion resistance especially at elevated temperatures. However the trade-off for its extraordinary corrosion resistance is its lower tensile strength compared to PVDF or PEEK bolts.
PFA Hex Head Bolt Features and Benefits
It is important to differentiate between a PFA hex head bolt and hex head cap screw. Often people assume they are the same, but they are actually very different fasteners in terms of how they are manufactured, as well as from an application perspective. Regardless of your choice, PFA hex heads offer strong, stable joints because of their large head service.
The Hex Comparison
|
Hex Head Bolts |
Hex Head Cap Screw |
|
|
| Temperature (°F) | Ultimate Tensile (ksi) | Yield Strength 0.2% Offset (ksi) | Elongation % |
|---|---|---|---|
| Room Temp. | 3.6 | 2.0 | 300 |
| 480 | 2.0 | - | 480 |
| Property | ASTM or UL Test | Teflon® PFA |
|---|---|---|
| PHYSICAL | ||
| Density (lb/in³) (g/cm³) | D792 | 0.077 (2.14) |
| Water Absorption, 24 hrs (%) | D570 | <0.03 |
| MECHANICAL | ||
| Strength/Weight Ratio | Tensile Strength / Density (g/cc) | 1700 |
| Tensile Strength (psi) | D638 | 3,600 |
| Tensile Modulus (psi) | D638 | 80,000 |
| Tensile Elongation at Break (%) | D638 | 330 |
| Flexural Strength (psi) | D790 | No Break |
| Flexural Modulus (psi) | D790 | 85,000 |
| Hardness, Rockwell, R/M Scale | D785 | R55 |
| IZOD Impact Notched (ft-lb/in) | D256 | No Break |
| THERMAL | ||
| Coefficient of Linear Thermal Expansion (x 10-5 in./in./°F) | D696 | 7.8 |
| Heat Deflection Temp (°F / °C) at 264 psi | D648 | 163 / 73 |
| Melting Temp (°F / °C) | D3418 | 575 / 302 |
| Max Operating Temp (°F / °C) | - | 500 / 260 |
| Thermal Conductivity (BTU-in/ft²-hr-°F) | C177 | 1.4 |
| Flammability Rating | UL94 | V-O |
| ELECTRICAL | ||
| Dielectric Strength (V/mil) short time, 1/8" thick | D149 | 6500 |
| Dielectric Constant at 1 MHz | D150 | 2.03 |
| Dissipation Factor at 1 MHz | D150 | 0.0001 |
| Volume Resistivity (ohm-cm) at 50% RH | D257 | > 10¹⁸ |
| APPROVALS | ||
| Approval | FDA | YES |
| Approval | USDA | NO |
| Approval | NSF | NO |
| Approval | 3A DAIRY | NO |
| Approval | USP CLASS VI | Medical Grades Available |


