Skip to main content
Extreme Bolt & Fastener
Quote

MP35N Socket Head Cap Screws

Last updated

One of the highest strength alloys available to industry

Need help choosing a material?

Socket Head Cap Screw

MP35N socket head cap screws are known for their extraordinary strength and are the strongest screws we offer at Extreme Bolt. MP35N socket head cap screws owe their extraordinary strength to a unique alloy combination of nickel, cobalt, chrome and molybdenum. These fasteners have a minimum 260ksi ultimate tensile strength, which typically reaches ~285ksi.

Beyond the strength of MP35N socket head cap screws, they are also exhibit good corrosion resistance and can resist most mineral acids, hydrogen sulfide, seawater and salt spray environments.

MP35N socket head cap screws are also resistant to high temperature oxidation and could operate in environments up to 800°F and still maintain much of its strength.

Applications where MP35N socket head cap screws are often found are: aerospace, defense, marine, chemical processing, oil and gas and medical.

Screw Types: 12 Point Screws, Button Head Cap Screws, Flat Head Screws, Hex Cap Screws, Pan Head Screws, Set Screws, Socket Head Cap Screws, Tamper Resistant Security Screws


MP35N Socket Head Cap Screw Features and Benefits

When it comes to MP35N socket head cap screws, it’s all about clearance. These screws are the best choice for applications with limited installation access or clearance. Yet if you have an application with a lot of debris, you may want to select a MP35N hex head bolt or hex head cap screw, as they don’t have a socket drive which could get clogged.

Advantages:

  • Ideal for applications with limited access as they require very little clearance around the fastener.
  • Socket head cap screws can be used in locations where externally wrenched fasteners aren't desirable.
  • Weight reduction on application as MP35N socket head cap screws are smaller – being that the cylindrical heads of socket screws need less space than hex heads and require no additional wrench space.
  • Also known for safety, reliability and economy.

MP35N Chemistry, Specifications and Heat Treatments

Heat Treating & Aging: MP35N is usually supplied in heat treated and cold drawn condition AMS 5844. In this state the MP35N can be worked into the desired fastener form and aged to the AMS 5845 specification. Once aged, the MP35N material could achieve it full strength potential. 

MP35N Specifications:  AMS 5844, AMS 5845, AMS7468, ASTM F562, NACE MR0175

MP35N — table
MP35NNiCoCrMo
Typical %35352010

MP35N Mechanical Data (Dependent of Part Size)

Guarenteed Minimum Properties — table
Guarenteed Minimum PropertiesNominal Properties
UTS (ksi)Yield Strength
(0.2%) ksi
Elongation
(% 4D)
RA (%)HRCUTS (ksi)Yield Strength
(0.2%) ksi
Elongation
(% 4D)
RA (%)HRC
MP35N Cold Drawn Full Strength26023083544 min28527594550

MP35N Corrosion Data

MP35N - Corrosion Data
MediaCorrosion
Resistance
MediaCorrosion
Resistance
Nitric AcidGoodSulfuric AcidGood
Phosphoric AcidGoodAcetic AcidExcellent
Sodium HydroxideGoodSalt Spray (NaCl)Excellent
Sea WaterExcellentSour Oil/GasExcellent
Important Note: The following 4-level rating scale is intended for comparative purposes only for this materials only. Corrosion testing is recommended; factors which affect corrosion resistance include temperature, concentration, pH, impurities, aeration, velocity, crevices, deposits, metallurgical condition, stress, surface finish and dissimilar metal contact.

Questions?

Our material experts are ready to help guide you through your specific application.