Skip to main content
Extreme Bolt & Fastener
Quote

MP35N Flat Head Screws

Last updated

One of the highest strength alloys available to industry

Need help choosing a material?

Flat Head

MP35N flat head screws are known for their extraordinary strength and are the strongest screws we offer at Extreme Bolt. MP35N screws owe their extraordinary strength to a unique alloy combination of nickel, cobalt, chrome and molybdenum. These fasteners have a minimum 260ksi ultimate tensile strength, which typically reaches ~285ksi.

Beyond the strength of MP35N flat head screws, they are also exhibit good corrosion resistance and can resist most mineral acids, hydrogen sulfide, seawater and salt spray environments.

MP35N screws are also resistant to high temperature oxidation and could operate in environments up to 800°F and still maintain much of its strength.

Applications where MP35N flat head screws are often found are: aerospace, defense, marine, chemical processing, oil and gas and medical.

Screw Types: 12 Point Screws, Button Head Cap Screws, Flat Head Screws, Hex Cap Screws, Pan Head Screws, Set Screws, Socket Head Cap Screws, Tamper Resistant Security Screws


MP35N Flat Head Screw Features and Benefits

MP35N flat head screws are characterized by having a head with a top flat surface (which can feature either a slotted, phillips or allen driver) and bottom that is cone shaped or countersunk. With this design, the head of the screw can align flush or below the surrounding surface having obvious benefits.

MP35N Slotted vs. Phillips Driver 

 Slotted Head Advantages Phillips Head Advantages 
  • Slotted head screws tend to strip less than Philips, especially in harsh environments
  • Slotted heads are typically better in applications where it's going to be unscrewed and re-done periodically, as the head tends to wear less.

  • In dirty environments, a flat head is much easier to clean out

  • Phillips head offers a much stronger joint since it can tolerate more torque.

Countersink Angle

For most flat head screw designs the angle of countersink is usually 82° for UNC and UNF applications however other angles ranging from 60° -120° could be specified. 

Thread Type Normal Flat Head Countersink Angle

UNC / UNF

82°

Aerospace 100°
ISO Metric / Imperial 90°

MP35N Chemistry, Specs and Heat Treatments

Heat Treating & Aging: MP35N is usually supplied in heat treated and cold drawn condition AMS 5844. In this state the MP35N can be worked into the desired fastener form and aged to the AMS 5845 specification. Once aged, the MP35N material could achieve it full strength potential. 

MP35N Specifications:  AMS 5844, AMS 5845, AMS7468, ASTM F562, NACE MR0175

MP35N — table
MP35NNiCoCrMo
Typical %35352010

MP35N Mechanical Data (Dependent of Part Size)

Guarenteed Minimum Properties — table
Guarenteed Minimum PropertiesNominal Properties
UTS (ksi)Yield Strength
(0.2%) ksi
Elongation
(% 4D)
RA (%)HRCUTS (ksi)Yield Strength
(0.2%) ksi
Elongation
(% 4D)
RA (%)HRC
MP35N Cold Drawn Full Strength26023083544 min28527594550

MP35N Corrosion Data

MP35N - Corrosion Data
MediaCorrosion
Resistance
MediaCorrosion
Resistance
Nitric AcidGoodSulfuric AcidGood
Phosphoric AcidGoodAcetic AcidExcellent
Sodium HydroxideGoodSalt Spray (NaCl)Excellent
Sea WaterExcellentSour Oil/GasExcellent
Important Note: The following 4-level rating scale is intended for comparative purposes only for this materials only. Corrosion testing is recommended; factors which affect corrosion resistance include temperature, concentration, pH, impurities, aeration, velocity, crevices, deposits, metallurgical condition, stress, surface finish and dissimilar metal contact.

Questions?

Our material experts are ready to help guide you through your specific application.