Skip to main content
Extreme Bolt & Fastener
Quote

254 SMO Washers

Last updated

A corrosion resistant 6Mo alloy for high chloride environments

Need help choosing a material?

PulpPaper iStock Paid PhotoID509038186 Pulp and Paper

254 SMO (1.4547) fasteners are made of a high-end stainless steel alloy that was developed for resistance to saltwater and chloride corrosion. This 6-Moly (6% Molybdenum) alloy has good localized corrosion resistance and 254 SMO provides much higher strength than other austenitic stainless steels. 254 SMO bolts are an ideal choice for high chloride environments including brackish water, seawater and other applications that demand heavy use of chlorines and chlorides. Compared to sister 6-Moly alloy AL6XN, 254 SMO fasteners offer slightly less high temperature stability corrosion resistance and strength.

Key Attributes

  • Good resistance to pitting & crevice corrosion
  • Good resistance to stress corrosion cracking
  • Good general corrosion resistance
  • Good strength nearly twice that of 300 series steels
  • High ductility and impact strength
  • Low carbon content for reduced risk of carbide precipitation during heating

Applications

  • Often used in industries that require bleach such as pulp & paper
  • Seawater protection for off-shore oil
  • Saltwater applications such as desalination
  • Chemical and food processing equipment
  • Flue-gas cleaning and desulfurization scrubbers


254 SMO Fastener Styles

254 SMO Screws

Standards

  • DIN 603 / ISO 8677
  • DIN 912 / ISO 4762
  • DIN 913 / ISO 4026
  • DIN 914 / ISO 4027
  • DIN 915 / ISO 4028
  • DIN 916 / ISO 4029
  • DIN 921
  • DIN 931 / ISO 4014
  • DIN 933 / ISO 4017
  • DIN 961 / ISO 8676
  • DIN 965 / ISO 7046
  • DIN 966 / ISO 7047
  • DIN 7991 / ISO 10642
  • DIN 7380 / ISO 7380
  • DIN 84 / ISO 1207
  • DIN 85 / ISO 1580
  • DIN 34822
  • DIN 34821
  • DIN 7504 / ISO 15480
  • DIN 7984
  • DIN 963 / ISO 2009
View 254 SMO Screws

254 SMO Bolts

Standards

  • DIN 931
  • DIN 933
  • ISO 4014
  • ISO 4017
  • ISO 7370
View 254 SMO Bolts

254 SMO Nuts

Standards

  • DIN 439 / ISO 4035
  • DIN 934 / ISO 4032
  • DIN 985 / ISO 7040
  • DIN 986
  • DIN 980 / ISO 7042 / ISO 19513
  • DIN 6923 / ISO 4161
View 254 SMO Nuts

254 SMO Threaded Products

Standards

  • DIN 975
  • DIN 976
View 254 SMO Threaded Products

254 SMO Washers

Standards

  • DIN 125 / ISO 7089 / ISO 7090
  • DIN 126 / ISO 7091
  • DIN 127 / ISO 7090
  • DIN 9021 / ISO 7093
View 254 SMO Washers

254 SMO (1.4547) Chemistry & Specifications

254 SMO Specifications: UNS S31254, EN Number 1.4547

254 SMO — table
254 SMOFeCrNiMoCuMnSiNPCS
Min %-19.517.56.00.5--0.18---
Max %Bal20.518.56.51.01.00.80.200.030.020.01

254 SMO Mechanical Properties

Properties — table
PropertiesMetricImperial
Tensile Strength680 Mpa98.6 ksi
Yield Strength300 Mpa43.5 ksi
Elongation at Break50%50%
Modulus of Elasticity195 GPa28300 ksi
Shear modulus75 GPa10900 ksi

254 Tensile Strength Chart

254 SMO tensile strength (Rm), proof strengths (Rp1.0, Rp0.2) and ASME allowable stress vs. temperature.

254 SMO Sulfuric Acid Iso Corrosion Curve

254 SMO iso-corrosion curve in sulfuric acid (H2SO4), aerated with 2000 ppm chloride ion. Each contour marks the 0.1 mm/yr (4 mpy) corrosion-rate boundary; 254 SMO is compared with 904L, with the boiling-point curve above.

254 SMO Seawater Corrosion

Crevice Corrosion Tests in Seawater: Percentage of Sites Attached

UNS — table
UNS% Sites
Attacked
AL6XNN083670%
Hastelloy C276N102760%
254 SMOS312546%
1925hMoN089266%
316 / 316LS3160375%
Source: LaQue Center for Corrosion Studies

254 SMO Screws

12 Point ScrewsIFI-115MIL SPECDIN 34822DIN 34821
254 SMO 12 point screws are ideal when you need higher torque than socket head cap screws offer. These screws are available in 1/4" diameter or larger. The only drawback is 12 point screws are less economical and require a higher minimum quantity due to the complexity of production.
Button Head Cap ScrewsASME B18.3ASME 18.3.4MDIN 7380 / ISO 7380
For applications that require a wide clamping area and low profile fastener 254 SMO button  head cap screws are a good choice. Button head screws are also used for fastening a material that is too thin to counter bore.
Flat Head ScrewsASME B18.3ASME B18.3.6DIN 963 / ISO 2009DIN 965 / ISO 7046DIN 7991 / ISO 10642
254 SMO flat head screws come standard with an 82° countersink angle. Other angles ranging from 60° -120° can also be made upon request. 254 SMO flat heads can be made with slotted or socket drivers. Phillips, torx and tamperproof drivers are also available depending on size, quantity and material.
Hex Head Cap ScrewsASME B18.6.3DIN 931 / ISO 4014DIN 933 / ISO 4017DIN 961 / ISO 8676
254 SMO hex head cap screws are one of the most commonly used styles. They feature an added washer face that hex head bolt do not have. This washer face provides tighter dimensional tolerances. 254 SMO hex head cap screws provide high clamping force and easy access.
Pan Head ScrewsASME B18.6.3DIN 7985DIN 921DIN 85 / ISO 1580DIN 84 / ISO 1207 (cheese head)DIN 966 / ISO 7047 (raised counter sunk)
Pan head screws have a rounded head and most commonly have a slotted driver. 254 SMO pan heads are best for small diameter and low torque applications.
Security Screws
254 SMO tamper-proof security screws provide protection from unwanted removal because they cannot be unfastened using an common driver. Tamper-proof screws are produced in a wide variety of head styles, as well as custom per print.
Set ScrewsASME B18.3DIN 913 / ISO 4026DIN 914 / ISO 4027DIN 915 / ISO 4028DIN 916 / ISO 4029
254 SMO set screws are a headless fastener with a slotted or socket driver on one end and a special tip on the other. Set screws are available with cup, cone, flat, dog and half-dog points.
Socket Head Cap ScrewsASME B18.3DIN 912 / ISO 4762DIN 7984
254 SMO socket head cap screws are an ideal solution for safe, secure fastening in low clearance applications.
Vented Screws
254 SMO vented screws provide a way to out-gas application contaminents through a vertical hole drilled from the screw head through the threaded shaft. Vented screws are ideal for vacuums / high vacuums. Nimonic vented screws are available a variety of head styles.

254 SMO Washers

Flat WashersASME 18.21.1SAE / USSDIN 125 / ISO 7089 / ISO 7090DIN 126 / ISO 7091
254 SMO washers are availble in several specifications including SAE, USS, DIN, MilSpec, oversized, and custom per print.
Lock WashersASME B18.21.1DIN 127 / ISO 7090DIN 6796 / ISO 10690
254 SMO washers are available as a split lock washer style.

Questions?

Our material experts are ready to help guide you through your specific application.