254 SMO Bolts
Last updated
A corrosion resistant 6Mo alloy for high chloride environments
Need help choosing a material?
-
General and localized resistance to saltwater and chlorides
- Strength almost 2x's 300 series stainless
- 254 SMO Mechanical properties
- Strength and corrosion charts
- Datasheet for 254 SMO fasteners
254 SMO (1.4547) fasteners are made of a high-end stainless steel alloy that was developed for resistance to saltwater and chloride corrosion. This 6-Moly (6% Molybdenum) alloy has good localized corrosion resistance and 254 SMO provides much higher strength than other austenitic stainless steels. 254 SMO bolts are an ideal choice for high chloride environments including brackish water, seawater and other applications that demand heavy use of chlorines and chlorides. Compared to sister 6-Moly alloy AL6XN, 254 SMO fasteners offer slightly less high temperature stability corrosion resistance and strength.
Key Attributes
- Good resistance to pitting & crevice corrosion
- Good resistance to stress corrosion cracking
- Good general corrosion resistance
- Good strength nearly twice that of 300 series steels
- High ductility and impact strength
- Low carbon content for reduced risk of carbide precipitation during heating
Applications
- Often used in industries that require bleach such as pulp & paper
- Seawater protection for off-shore oil
- Saltwater applications such as desalination
- Chemical and food processing equipment
- Flue-gas cleaning and desulfurization scrubbers
254 SMO Fastener Styles
254 SMO Screws
- 12 Point Screws
- Button Head Cap Screws
- Flat Head Screws
- Hex Head Cap Screws
- Pan Head Screws
- Security Screws
- Set Screws
- Socket Head Cap Screws
- Vented Screws
Standards
- DIN 603 / ISO 8677
- DIN 912 / ISO 4762
- DIN 913 / ISO 4026
- DIN 914 / ISO 4027
- DIN 915 / ISO 4028
- DIN 916 / ISO 4029
- DIN 921
- DIN 931 / ISO 4014
- DIN 933 / ISO 4017
- DIN 961 / ISO 8676
- DIN 965 / ISO 7046
- DIN 966 / ISO 7047
- DIN 7991 / ISO 10642
- DIN 7380 / ISO 7380
- DIN 84 / ISO 1207
- DIN 85 / ISO 1580
- DIN 34822
- DIN 34821
- DIN 7504 / ISO 15480
- DIN 7984
- DIN 963 / ISO 2009
254 SMO Nuts
Standards
- DIN 439 / ISO 4035
- DIN 934 / ISO 4032
- DIN 985 / ISO 7040
- DIN 986
- DIN 980 / ISO 7042 / ISO 19513
- DIN 6923 / ISO 4161
254 SMO Washers
Standards
- DIN 125 / ISO 7089 / ISO 7090
- DIN 126 / ISO 7091
- DIN 127 / ISO 7090
- DIN 9021 / ISO 7093
| 254 SMO | Fe | Cr | Ni | Mo | Cu | Mn | Si | N | P | C | S |
|---|---|---|---|---|---|---|---|---|---|---|---|
| Min % | - | 19.5 | 17.5 | 6.0 | 0.5 | - | - | 0.18 | - | - | - |
| Max % | Bal | 20.5 | 18.5 | 6.5 | 1.0 | 1.0 | 0.8 | 0.20 | 0.03 | 0.02 | 0.01 |
| Properties | Metric | Imperial |
|---|---|---|
| Tensile Strength | 680 Mpa | 98.6 ksi |
| Yield Strength | 300 Mpa | 43.5 ksi |
| Elongation at Break | 50% | 50% |
| Modulus of Elasticity | 195 GPa | 28300 ksi |
| Shear modulus | 75 GPa | 10900 ksi |
254 SMO Seawater Corrosion
Crevice Corrosion Tests in Seawater: Percentage of Sites Attached
| UNS | % Sites Attacked | |
|---|---|---|
| AL6XN | N08367 | 0% |
| Hastelloy C276 | N10276 | 0% |
| 254 SMO | S31254 | 6% |
| 1925hMo | N08926 | 6% |
| 316 / 316L | S31603 | 75% |
Source: LaQue Center for Corrosion Studies | ||





















