Silicon Bronze Threaded Rod
Last updated
A copper alloy with excellent electrical conductivity & resistance to salt water
Need help choosing a material?
- Excellent electrical conductivity due to its high copper content
- Good corrosion resistance in salt water and mild chemicals
- Galling resistant
- Common Grades – C65500 & C65100 chemistry and specs
- Physical and mechanical properties of C65500 and C65100
Silicon bronze bolts, screws and nuts are often used for their salt water corrosion resistance. Marine applications also look to silicon bronze bolts for their added benefit of being anti-biofouling. This attribute prevents the buildup of marine organisms on the material’s surface. Silicon bronze screws also offer a good level of strength – close to that of 316 stainless. Their seawater corrosion performance and strength are not as good as Monel or Titanium. Silicon bronze bolts are also slightly less effective in salt water (especially if its polluted) compared to Duplex bolts. Overall silicon bronze screws are viewed as a cost-effective solution to saltwater applications. In addition, Extreme Bolt can offer mil-spec silicon bronze fasteners which is required for many naval projects.
Beyond its usage in marine environments, one of the most notable characteristics of silicon bronze bolts is their high electrical conductivity. This makes silicon bronze screws ideal for applications where efficiently moving electrical current is important.
Lastly, silicon bronze fasteners are non-magnetic and have a very low magnetic permeability. Depending on requirements, this can also be important for eletronic applications.
Common Grades of Silicon Bronze Fasteners
Low Silicon Bronze 651 (Also referred to as 65100)
This grade of silicon bronze bolts has approximately 96% of copper and ~1.5% silicon. Having a higher percentage of copper than the 655 variety, grade 651 offers higher tensile and yield strength, but lower elongation.
High Silicon Bronze 655 (Also referred to as 65500)
This grade of silicon bronze has approximately 95% copper and ~ 3% silicon. This composition makes the alloy very ductile, but also weaker than its sister grade C65100.
Silicon Bronze Fastener Styles
Silicon Bronze Screws
- 12 Point Screws
- Button Head Cap Screws
- Flat Head Screws
- Hex Head Cap Screws
- Pan Head Screws
- Set Screws
- Socket Head Cap Screws
- Vented Screws
Standards
- DIN 603 / ISO 8677
- DIN 912 / ISO 4762
- DIN 913 / ISO 4026
- DIN 914 / ISO 4027
- DIN 915 / ISO 4028
- DIN 916 / ISO 4029
- DIN 921
- DIN 931 / ISO 4014
- DIN 933 / ISO 4017
- DIN 961 / ISO 8676
- DIN 965 / ISO 7046
- DIN 966 / ISO 7047
- DIN 7991 / ISO 10642
- DIN 7380 / ISO 7380
- DIN 84 / ISO 1207
- DIN 85 / ISO 1580
- DIN 34822
- DIN 34821
- DIN 7504 / ISO 15480
- DIN 7984
- DIN 963 / ISO 2009
Silicon Bronze Nuts
Standards
- DIN 439 / ISO 4035
- DIN 934 / ISO 4032
- DIN 985 / ISO 7040
- DIN 986
- DIN 980 / ISO 7042 / ISO 19513
- DIN 6923 / ISO 4161
Silicon Bronze Washers
Standards
- DIN 125 / ISO 7089 / ISO 7090
- DIN 126 / ISO 7091
- DIN 127 / ISO 7090
- DIN 9021 / ISO 7093
Silicon Bronze Chemistry and Specifications
Silicon Bronze 655 / 65500 Chemistry and Specifications
HIGH SILICON BRONZE 655 SPECIFICATIONS (65500): UNS C65500, ASTM F467 (Bolts /Screws) ASTM F468 (Nuts)
| Silicon Bronze C65500 | Cu | Si | Zn | Mn | Fe | Ni | Pb |
|---|---|---|---|---|---|---|---|
| Min % | - | 2.8 | - | 0.50 | - | - | - |
| Max % | Bal | 3.8 | 1.5 | 1.3 | 0.8 | 0.6 | 0.05 |
| Physical Properties | |
|---|---|
| Melting Point - Liquidus (°F) | 1,880 |
| Melting Point - Solidus (°F) | 1,780 |
| Density (lb/cu in. at 68°F) | 0.308 |
| Specific Gravity | 8.53 |
| Electrical Conductivity (% IACS at 68°F) | 7 |
| Thermal Conductivity (Btu/ sq ft/ ft hr/ °F at 68°F) | 21 |
| Specific Heat Capacity (Btu/ lb /°F at 68°F) | 0.09 |
| Modulus of Elasticity in Tension (ksi) | 15,000 |
| Modulus of Rigidity (ksi) | 5,600 |
| Diameter | Hardness (HRB) | Tensile (ksi) | Yield (ksi) | Elongation (4D, Min %) |
|---|---|---|---|---|
| All | 60-80 | 50-80 | 20 | 20 |
Properties Per ASTM F468 | ||||
Silicon Bronze 651 / 65100 Chemistry and Specifications
LOW SILICON BRONZE 651 SPECIFICATIONS (65100): UNS C65100, ASTM F467 (Bolts /Screws) ASTM F468 (Nuts)
| Silicon Bronze C65100 | Cu | Si | Zn | Fe | Mn | Pb |
|---|---|---|---|---|---|---|
| Min % | - | 0.8 | - | - | - | - |
| Max % | Bal | 2.0 | 1.5 | 0.8 | 0.7 | 0.05 |
| Physical Properties | |
|---|---|
| Melting Point - Liquidus (°F) | 1,940 |
| Melting Point - Solidus (°F) | 1,890 |
| Density (lb/cu in. at 68°F) | 0.316 |
| Specific Gravity | 8.75 |
| Electrical Conductivity (% IACS at 68°F) | 12 |
| Thermal Conductivity (Btu/ sq ft/ ft hr/ °F at 68°F) | 33 |
| Specific Heat Capacity (Btu/ lb /°F at 68°F) | 0.09 |
| Modulus of Elasticity in Tension (ksi) | 17,000 |
| Modulus of Rigidity (ksi) | 6,400 |
| Diameter | Hardness (HRB) | Tensile (ksi) | Yield (ksi) | Elongation (4D, Min %) |
|---|---|---|---|---|
| 1/4" - 3/4" | 75-95 | 70-100 | 55 | 8 |
| 7/8" - 1.5" | 75-95 | 55-90 | 40 | 8 |
Properties Per ASTM F468 | ||||

















