Skip to main content
Extreme Bolt & Fastener
Quote

Silicon Bronze Studs

Last updated

A copper alloy with excellent electrical conductivity & resistance to salt water

Need help choosing a material?

Extra Pexel SaltwaterCorrosion
  • Excellent electrical conductivity due to its high copper content
  • Good corrosion resistance in salt water and mild chemicals
  • Galling resistant
  • Common Grades – C65500 & C65100 chemistry and specs
  • Physical and mechanical properties of C65500 and C65100

Silicon bronze bolts, screws and nuts are often used for their salt water corrosion resistance. Marine applications also look to silicon bronze bolts for their added benefit of being anti-biofouling. This attribute prevents the buildup of marine organisms on the material’s surface. Silicon bronze screws also offer a good level of strength – close to that of 316 stainless.  Their seawater corrosion performance and strength are not as good as Monel or Titanium. Silicon bronze bolts are also slightly less effective in salt water (especially if its polluted) compared to Duplex bolts. Overall silicon bronze screws are viewed as a cost-effective solution to saltwater applications. In addition, Extreme Bolt can offer mil-spec silicon bronze fasteners which is required for many naval projects.

Beyond its usage in marine environments, one of the most notable characteristics of silicon bronze bolts is their high electrical conductivity. This makes silicon bronze screws ideal for applications where efficiently moving electrical current is important.

Lastly, silicon bronze fasteners are non-magnetic and have a very low magnetic permeability. Depending on requirements, this can also be important for eletronic applications.

Common Grades of Silicon Bronze Fasteners

Low Silicon Bronze 651 (Also referred to as 65100)

This grade of silicon bronze bolts has approximately 96% of copper and ~1.5% silicon. Having a higher percentage of copper than the 655 variety, grade 651 offers higher tensile and yield strength, but lower elongation.

High Silicon Bronze 655 (Also referred to as 65500)

This grade of silicon bronze has approximately 95% copper and ~ 3% silicon. This composition makes the alloy very ductile, but also weaker than its sister grade C65100.



Silicon Bronze Fastener Styles

Silicon Bronze Screws

Standards

  • DIN 603 / ISO 8677
  • DIN 912 / ISO 4762
  • DIN 913 / ISO 4026
  • DIN 914 / ISO 4027
  • DIN 915 / ISO 4028
  • DIN 916 / ISO 4029
  • DIN 921
  • DIN 931 / ISO 4014
  • DIN 933 / ISO 4017
  • DIN 961 / ISO 8676
  • DIN 965 / ISO 7046
  • DIN 966 / ISO 7047
  • DIN 7991 / ISO 10642
  • DIN 7380 / ISO 7380
  • DIN 84 / ISO 1207
  • DIN 85 / ISO 1580
  • DIN 34822
  • DIN 34821
  • DIN 7504 / ISO 15480
  • DIN 7984
  • DIN 963 / ISO 2009
View Silicon Bronze Screws

Silicon Bronze Bolts

Standards

  • DIN 931
  • DIN 933
  • ISO 4014
  • ISO 4017
  • ISO 7370
View Silicon Bronze Bolts

Silicon Bronze Nuts

Standards

  • DIN 439 / ISO 4035
  • DIN 934 / ISO 4032
  • DIN 985 / ISO 7040
  • DIN 986
  • DIN 980 / ISO 7042 / ISO 19513
  • DIN 6923 / ISO 4161
View Silicon Bronze Nuts

Silicon Bronze Threaded Products

Standards

  • DIN 975
  • DIN 976
View Silicon Bronze Threaded Products

Silicon Bronze Washers

Standards

  • DIN 125 / ISO 7089 / ISO 7090
  • DIN 126 / ISO 7091
  • DIN 127 / ISO 7090
  • DIN 9021 / ISO 7093
View Silicon Bronze Washers

 


Silicon Bronze Chemistry and Specifications

Silicon Bronze 655 / 65500 Chemistry and Specifications

HIGH SILICON BRONZE 655 SPECIFICATIONS (65500): UNS C65500, ASTM F467 (Bolts /Screws)  ASTM F468 (Nuts) 

Silicon Bronze C65500 — table
Silicon Bronze
C65500
CuSiZnMnFeNiPb
Min %-2.8-0.50---
Max %Bal3.81.51.30.80.60.05

Silicon Bronze 655 / 65500 Physical Properties

Silicon Bronze
C65500
Physical Properties
Melting Point - Liquidus (°F)1,880
Melting Point - Solidus (°F)1,780
Density (lb/cu in. at 68°F)0.308
Specific Gravity8.53
Electrical Conductivity (% IACS at 68°F)7
Thermal Conductivity (Btu/ sq ft/ ft hr/ °F at 68°F)21
Specific Heat Capacity (Btu/ lb /°F at 68°F)0.09
Modulus of Elasticity in Tension (ksi)15,000
Modulus of Rigidity (ksi)5,600

Silicon Bronze 655 / 65500 Mechanical Properties

Diameter — table
DiameterHardness (HRB)Tensile (ksi)Yield (ksi)Elongation
(4D, Min %)
All60-8050-802020
Properties Per ASTM F468

Silicon Bronze 651 / 65100 Chemistry and Specifications

LOW SILICON BRONZE 651 SPECIFICATIONS (65100): UNS C65100, ASTM F467 (Bolts /Screws)  ASTM F468 (Nuts)

Silicon Bronze C65100 — table
Silicon Bronze
C65100
CuSiZnFeMnPb
Min %-0.8----
Max %Bal2.01.50.80.70.05

Silicon Bronze 651 / 65100 Physical Properties

Silicon Bronze
C65100
Physical Properties
Melting Point - Liquidus (°F)1,940
Melting Point - Solidus (°F)1,890
Density (lb/cu in. at 68°F)0.316
Specific Gravity8.75
Electrical Conductivity (% IACS at 68°F)12
Thermal Conductivity (Btu/ sq ft/ ft hr/ °F at 68°F)33
Specific Heat Capacity (Btu/ lb /°F at 68°F)0.09
Modulus of Elasticity in Tension (ksi)17,000
Modulus of Rigidity (ksi)6,400

Silicon Bronze 651 / 65100 Mechanical Properties

Diameter — table
DiameterHardness (HRB)Tensile (ksi)Yield (ksi)Elongation
(4D, Min %)
1/4" - 3/4"75-9570-100558
7/8" - 1.5"75-9555-90408
Properties Per ASTM F468

Silicon Bronze Screws

12 Point ScrewsIFI-115MIL SPECDIN 34822DIN 34821
Silicon bronze 12 point screws are ideal for higher torque applications compared to socket head cap screws. The only drawback is they can be less economical due to the complex head design. Available in 1/4" or larger sizes.
Button Head Cap ScrewsASME B18.3ASME 18.3.4MDIN 7380 / ISO 7380
When a wide clamping area and low profile is required, silicon bronze button head socket cap screws are a good choice for fastening a material that is too thin to counter bore.
Flat Head ScrewsASME B18.3ASME B18.3.6DIN 963 / ISO 2009DIN 965 / ISO 7046DIN 7991 / ISO 10642
Most commonly offered in an 82°, silicon bronze flat head screws can also be customized to 60° -120° angles. These screws are designed to be flush with the surface. Silicon bronze flat heads are available in slotted and socket drivers. Phillips and torx can also be made in high quantities.
Hex Head Cap ScrewsASME B18.6.3DIN 931 / ISO 4014DIN 933 / ISO 4017DIN 961 / ISO 8676
Silicon bronze hex head cap screws feature an added washer face under the head of the bolt (lacking on a hex bolt) which provides tighter dimensional tolerances. Ideal for a high clamping force applications with ease of access. 
Pan Head ScrewsASME B18.6.3DIN 7985DIN 921DIN 85 / ISO 1580DIN 84 / ISO 1207 (cheese head)DIN 966 / ISO 7047 (raised counter sunk)
Silicon bronze pan head screws have a rounded head and often feature a slotted driver. They are best for small diameter and low torque applications.
Set ScrewsASME B18.3DIN 913 / ISO 4026DIN 914 / ISO 4027DIN 915 / ISO 4028DIN 916 / ISO 4029
Silicon bronze set screws are a headless fastener with a slotted or socket driver on one end and a point on the other. Silicon bronze set screws can have a cup, cone, flat, dog and half-dog point.
Socket Head Cap ScrewsASME B18.3DIN 912 / ISO 4762DIN 7984
Silicon bronze socket head cap screws are a safe, reliable fastening solution when there is limited accessibility and little clearance.
Vented Screws
Silicon bronze vented screws have a vertical hole drilled through the head to the end of the threads. This allows gases and other contaminents to vent. Silicon bronze vented screws are available in almost any head style.

More Silicon Bronze products

Questions?

Our material experts are ready to help guide you through your specific application.