Skip to main content
Extreme Bolt & Fastener
Quote

Nickel 200 Bolts

Last updated

Ideal for caustic alkali corrosive solutions

Need help choosing a material?

Nickel200 Upsplash Free Papermill

Nickel 200 (2.4060) fasteners are made from commercially pure nickel and are best known for their excellent performance in caustic alkali solutions such as caustic soda (NaOH). Nickel 200 also exhibits good performance in acids, especially HF (Hydrofluoric Acid - anhydrous) and hydroxides – but can be attacked by common solutions of hydrochloric or sulfuric acids.

From a mechanical perspective, Nickel 200 bolts have good ductility and low hardness, so they are tough, but not particularly strong (60-85 KSI UTS). See Tensile, Yield & Elongation Chart.

Corrosion

Nickel 200 screws are resistant to corrosive environments, most notably reducing chemicals. They offer outstanding protection to caustic alkaline solutions. However, Nickel 200 fasteners will be severely attacked in oxidizing salt solutions.
 
Chemical Resistance

  • Sodium Hydroxide (NaOH): Excellent resistance to all concentrations of caustic soda.
  • Alkalis: Excellent resistance except for ammonium hydroxide.
  • Sulfuric acid: Moderate resistance to nonaerated sulfuric acid solutions near room temperature.
  • Hydrochloric: Limited resistance in specific environments only.
  • Hydrofluoric: Good resistance to anhydrous hydrofluoric acid even at high temperatures. Nickel 200 it has limited resistance to aqueous HF solutions.
  • Important: Oxidizing acid chlorides such as ferric, cupric and mercuric are very corrosive to Nickel 200 fasteners.

General

  • 60-85 KSI UTS
  • 15-45 KSI Yield
  • Typically used in application temperatures less than 600⁰F / 315⁰C

Applications

  • Most often used in chemical and electronic processing, especially applications that deal with caustic soda.
  • High electrical and thermal conductivity, as well as magnetostrictive properties make Nickel 200 screws useful in electrics and sonic devices.
  • Nickel 200 bolts are used in salt production and applications that use sodium hydroxide and fluorine.


 


Nickel 200 Chemistry and Specifications

NICKEL 200 SPECIFICATIONS: UNS N02200, EN 2.4060, EN 2.40666

Nickel 200 — table
Nickel 200NiFeMnSiCuCS
99.0 min0.40 max0.35 max0.35 max0.25 max0.15 max0.01 max

Nickel 200 Aqueous Corrosion Data

Media — table
MediaCommon NameTemperature
°F (°C)
Corrosion
Rate (mpy)
5% CH3CO2H with AirAccetic Acid70 (21)40
10% CH3CO2HAccetic Acid86 (30)3.4
56% CH3CO2HAccetic Acid176 (80)66
85% CH3CO2H with AirAccetic Acid70 (21)400
98% CH3CO2HAccetic Acid241 (116)12
50% NaOHCaustic Soda195 (90)0.55
50% NaOHCaustic Soda310 (155)0.5
75% NaOHCaustic Soda250 (120)1
90% CH2O2Formic Acid (liquid)70 (21)4
90% CH2O2Formic Acid (vapor)70 (21)7
1% HClHydrochloric Acid214 (101)680
10% HClHydrochloric Acid86 (30)80
10% HClHydrochloric Acid221 (105)8,000
10% HNO3Nitric Acid216 (102)12,000
10% H3PO4Phosphoric Acid75 (24)0.6
10% H3PO4Phosphoric Acid214 (101)154
40% H3PO4Phosphoric Acid75 (24)1
500ppm NaClOSodium Hypochlorite77 (25)0.8
2% H2SO4Sulfuric Acid70 (21)2
5% H2SO4Sulfuric Acid140 (60)10
5% H2SO4 with AirSulfuric Acid86 (30)61
19% H2SO4Sulfuric Acid223 (106)110
20% H2SO4Sulfuric Acid70 (21)4
50% H2SO4 with AirSulfuric Acid86 (30)16
50% H2SO4Sulfuric Acid255 (124)1,000
93% H2SO4 with AirSulfuric Acid86 (30)10

Nickel 200 Temperature vs. Strength
Nickel 200 Tensile Data


Nickel 200 Screws

12 Point ScrewsIFI-115MIL SPECDIN 34822DIN 34821
Nickel 12 point screws are an ideal choice when higher torque  than a socket head cap screw is needed. The only drawback is they are be less economical due to the complex head design. Available in 1/4" or larger sizes.
Button Head Cap ScrewsASME B18.3ASME 18.3.4MDIN 7380 / ISO 7380
Offering a wide clamping area and low profile, Nickel 200 button head screws are best suited for fastening a material that is too thin to counter bore.
Flat Head ScrewsASME B18.3ASME B18.3.6DIN 963 / ISO 2009DIN 965 / ISO 7046DIN 7991 / ISO 10642
Most commonly offered in an 82° countersink angle, Nickel 200 flat head screws but can be customized to other angles from 60° -120°. These screws are designed to be flush with the surface.  Nickel 200 flat heads are available in slotted and socket drivers. Phillips, torx and other tamperproof drivers can also be made upon request.
Hex Head Cap ScrewsASME B18.6.3DIN 931 / ISO 4014DIN 933 / ISO 4017DIN 961 / ISO 8676
Nickel 200 hex head cap screws feature an added washer face to the bolt head (lacking on a hex bolt) which provides tighter dimensional tolerances. Ideal for a high clamping force applications with ease of access. Generally availabe in #2 - 1/2" sizes and metric sizes.
Pan Head ScrewsASME B18.6.3DIN 7985DIN 921DIN 85 / ISO 1580DIN 84 / ISO 1207 (cheese head)DIN 966 / ISO 7047 (raised counter sunk)
Nickel 200 pan head screws have a rounded head style and typically featured a slotted driver. They are best for small diameter fasteners and low torque applications.
Security Screws
Nickel 200 security screws provide a solution to unwanted tampering or removal due to the fact that they cannot be removed using an ordinary driver. Nickel 200 security screws can be made in a wide variety of driver styles, as well as custom per print.
Set ScrewsASME B18.3DIN 913 / ISO 4026DIN 914 / ISO 4027DIN 915 / ISO 4028DIN 916 / ISO 4029
Nickel 200 set screws are a headless fastener with a slotted or socket driver on one end and a special point on the other. We offer Nickel 200 set screws in cup, cone, flat, dog and half-dog points.
Socket Head Cap ScrewsASME B18.3DIN 912 / ISO 4762DIN 7984
Nickel 200 socket head cap are a safe reliable fastening solution for applications with limited access and little clearance.
Vented Screws
Nickel 200 vented screws have a vertical hole drilled from the screw head through to the end of the threads. This allows gases and other contaminents to vent. Nickel 200 vented screws are ideal for vacuum / high vacuum applications. Nickel 200 vented screws are available in any head style.

Questions?

Our material experts are ready to help guide you through your specific application.