Skip to main content
Extreme Bolt & Fastener
Quote

MP159 Flat Head Screws

Last updated

Ultra-strength combined with extreme temperature capabilities

Need help choosing a material?

flat head s

As aerospace engineering advances, so must the materials to meet the technological requirements of this industry. Screws made from MP159 have been developed to provide a solution to high temperature, high strength components. MP159 flat head screws offer strength capabilities similar to other Cobalt Alloys (MP35N) but can be used at much higher temperatures - up to 1100°F, compared to MP35N’s usable limit of 800F. In addition, MP159 flat head screws can be used beyond 1100°F in short term situations.

Key Benefits

  • High ultimate tensile strength of 275 ksi and yield strength of 265 ksi (Cold Worked and Age Hardened) combined with excellent ductility and toughness
  • Similar corrosion resistance compared to MP35N which is usable in mineral acids, hydrogen sulfide, seawater and salt spray environments.
  • Excellent fatigue resistance and creep strength at elevated temperatures
  • Excellent resistance to crevice corrosion, stress corrosion cracking and hydrogen embrittlement

Applications

  • The aerospace industry relies on MP159 screws for its most advanced gas turbine and jet engines, rocket boosters and jet propulsion systems.
  • Power generation and chemical processing utilize MP159 flat head screws for applications that demand high strength at extreme temperatures.

MP159 Screw Types:  12 Point Screws, Button Head Cap Screws, Flat Head Screws, Hex Cap Screws, Hex Cap Screws, Set Screws, Socket Head Cap Screws, Tamper Resistant Security Screws


MP159 Flat Head Screw Features and Benefits

MP159 flat head screws are characterized by having a head with a top flat surface (which can feature either a slotted, phillips or allen driver) and bottom that is cone shaped or countersunk. With this design, the head of the screw can align flush or below the surrounding surface having obvious benefits.

MP159 Slotted vs. Phillips Driver 

 Slotted Head Advantages Phillips Head Advantages 
  • Slotted head screws tend to strip less than Philips, especially in harsh environments
  • Slotted heads are typically better in applications where it's going to be unscrewed and re-done periodically, as the head tends to wear less.

  • In dirty environments, a flat head is much easier to clean out

  • Phillips head offers a much stronger joint since it can tolerate more torque.

Countersink Angle

For most MP159 flat head screw designs the angle of countersink is usually 82° for UNC and UNF applications however other angles ranging from 60° -120° could be specified. 

Thread Type Normal Flat Head Countersink Angle

UNC / UNF

82°

Aerospace 100°
ISO Metric / Imperial 90°

MP159 Chemistry and Specifications

MP159N Specifications: UNS R30159

MP159 — table
MP159CoNiCrFeMoTiNbAl
Typical %35.725.5199730.60.2

MP159 High Strength Data

MP159 - Strength Data
Cold Worked, 48% +1225°F (663°C)/4 hrs/AC
UTS ksi (MPa)275 (1895)
Yield strength at 0.2% ksi (MPa)265 (1825)
% Elogation8
% RA35
Shear strength ksi (MPa) Per MIL-STD-1312138 (951)

 MP159 tensile properties (UTS, 0.2% YS, reduction of area, elongation) vs. % cold work plus a 1225°F (663°C)/4 hr age at AC.

MP159 elevated-temperature tensile data (48% CW + 1225F/663C / 4 hrs / AC): UTS and 0.2% yield strength vs test temperature (left axis, ksi), plus reduction of area (RA) and elongation (ELONG) vs temperature (right axis, %).

Questions?

Our material experts are ready to help guide you through your specific application.